Home
>
Alinco
>
Communications receiver
>
Alinco DJ-x2t/e Wide Band Communication Receiver Instruction Manual
Alinco DJ-x2t/e Wide Band Communication Receiver Instruction Manual
Have a look at the manual Alinco DJ-x2t/e Wide Band Communication Receiver Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 66 Alinco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
2
Basic Operation
26
Cloning
When using the clone function, all the settings of one DJ-X2 (master) can be
copied to another DJ-X2 (slave).
To operate the clone function:
1Turn OFF both DJ-X2s.
2Connect the earphone jacks on both master and slave DJ-X2s with the
cloning cable.
3Hold down the [VOL/SQL (SET)] key of the master DJ-X2, and turn it ON.
CLonE will appear on the display.
4Turn the slave DJ-X2 ON.
WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz
700 MEMORY
CHANNELSRX FREQUENCYX2
V / P / M...](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-25.png "Page 26
2
Basic Operation
26
Cloning
When using the clone function, all the settings of one DJ-X2 (master) can be
copied to another DJ-X2 (slave).
To operate the clone function:
1Turn OFF both DJ-X2s.
2Connect the earphone jacks on both master and slave DJ-X2s with the
cloning cable.
3Hold down the [VOL/SQL (SET)] key of the master DJ-X2, and turn it ON.
CLonE will appear on the display.
4Turn the slave DJ-X2 ON.
WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz
700 MEMORY
CHANNELSRX FREQUENCYX2
V / P / M...")
![Page 27
27
2
Basic Operation
5Press the [s] key of the master DJ-X2.
Cloning starts. SdØØØØ appears on the master DJ-X2s display, and
LdØØØØappears on the slave DJ-X2s display.
When cloning is completed, PASS appears on both DJ-X2s displays.
To return to normal operation, turn the power OFF, and then turn ON again.
Caution!· Do not disconnect the cable while cloning.
· Be advised that all data in the slave DJ-X2 will be updated if cloning is exe-
cuted.
· If you disconnect the cable or turn OFF the other...](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-26.png "Page 27
27
2
Basic Operation
5Press the [s] key of the master DJ-X2.
Cloning starts. SdØØØØ appears on the master DJ-X2s display, and
LdØØØØappears on the slave DJ-X2s display.
When cloning is completed, PASS appears on both DJ-X2s displays.
To return to normal operation, turn the power OFF, and then turn ON again.
Caution!· Do not disconnect the cable while cloning.
· Be advised that all data in the slave DJ-X2 will be updated if cloning is exe-
cuted.
· If you disconnect the cable or turn OFF the other...")
![Page 31
31
3
Operating in Expert Mode
3Select a bank by pressing the [10MHz (BANK)] key.
Every press of the [10MHz (BANK)] key changes the bank at the upper left
on the display as shown below.
0 Ý1 Ý2 ··· Ý9 ÝA ÝP ÝJ Ý0 ···
Each bank No. corresponds to the following bank.
0 - 9 : For Memory channel
A, B : For Program scan channel
P : For Priority channel
J : For Search-pass memory channel
Select a bank according to the use.
4Select a channel by pressing the [s / t] keys.
According to the type of bank, available...](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-30.png "Page 31
31
3
Operating in Expert Mode
3Select a bank by pressing the [10MHz (BANK)] key.
Every press of the [10MHz (BANK)] key changes the bank at the upper left
on the display as shown below.
0 Ý1 Ý2 ··· Ý9 ÝA ÝP ÝJ Ý0 ···
Each bank No. corresponds to the following bank.
0 - 9 : For Memory channel
A, B : For Program scan channel
P : For Priority channel
J : For Search-pass memory channel
Select a bank according to the use.
4Select a channel by pressing the [s / t] keys.
According to the type of bank, available...")
![Page 32
3
Operating in Expert Mode
32
nSelecting a channel
To call up a frequency programmed in a channel:
1Switch to the Memory mode by pressing the [V/P/M (MW)] key.
2Select a bank by pressing the [10MHz (BANK)] key.
3Select a channel by pressing [s / t] keys.
It is not possible to select a channel which is not programmed.
nClearing a channel
To clear a channel:
1Switch to the Memory mode by pressing the [V/P/M (MW)] key.
2Select a channel which you want to clear.
3Press the [FUNC/ENTER] key.
F will appear on...](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-31.png "Page 32
3
Operating in Expert Mode
32
nSelecting a channel
To call up a frequency programmed in a channel:
1Switch to the Memory mode by pressing the [V/P/M (MW)] key.
2Select a bank by pressing the [10MHz (BANK)] key.
3Select a channel by pressing [s / t] keys.
It is not possible to select a channel which is not programmed.
nClearing a channel
To clear a channel:
1Switch to the Memory mode by pressing the [V/P/M (MW)] key.
2Select a channel which you want to clear.
3Press the [FUNC/ENTER] key.
F will appear on...")
![Page 34
3
Operating in Expert Mode
34
nWhen receiving AM radio
At steps 1 and 2 mentioned on the previous page, bAr on/oF (which shows
the status of the bar antenna) appears on the display.
bAr on : Receives with the bar antenna.
bAr oF : Receives with the external antenna or earphone antenna.
(The default setting is ON.)
Pressing the [FUNC/ENTER] key completes the setting.
Selecting the Modulation Mode
You can select a modulation mode from AM, FM, and WFM.
To select :
1Press the [FUNC/ENTER] key.
F will appear...](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-33.png "Page 34
3
Operating in Expert Mode
34
nWhen receiving AM radio
At steps 1 and 2 mentioned on the previous page, bAr on/oF (which shows
the status of the bar antenna) appears on the display.
bAr on : Receives with the bar antenna.
bAr oF : Receives with the external antenna or earphone antenna.
(The default setting is ON.)
Pressing the [FUNC/ENTER] key completes the setting.
Selecting the Modulation Mode
You can select a modulation mode from AM, FM, and WFM.
To select :
1Press the [FUNC/ENTER] key.
F will appear...")
![Page 35
35
3
Operating in Expert Mode
Setting the Tuning Step
The tuning step sets the increment/decrement of each press of the [s / t]
keys when adjusting the frequency in VFO mode.
To set the tuning step:
1Switch to VFO mode by pressing the [V/P/M (MW)] key.
2Press the [FUNC/ENTER] key.
F will appear on the display.
3Press the [PS (STEP/SKIP)] key.
The currently selected tuning step will appear on the display. The default
setting is AUTO.
4Select a tuning step by pressing the [s / t] keys from the followings....](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-34.png "Page 35
35
3
Operating in Expert Mode
Setting the Tuning Step
The tuning step sets the increment/decrement of each press of the [s / t]
keys when adjusting the frequency in VFO mode.
To set the tuning step:
1Switch to VFO mode by pressing the [V/P/M (MW)] key.
2Press the [FUNC/ENTER] key.
F will appear on the display.
3Press the [PS (STEP/SKIP)] key.
The currently selected tuning step will appear on the display. The default
setting is AUTO.
4Select a tuning step by pressing the [s / t] keys from the followings....")
![Page 36
3
Operating in Expert Mode
36
Memory Skip
This function is for skipping the specified memory channel(s) when executing
the Memory scan.
To set the memory channel which you want to skip:
1Switch to Memory mode by pressing the [V/P/M (MW)] key.
2Call up the memory channel you want to skip.
3Press the [FUNC/ENTER] key.
F will appear on the display.
4Press the [PS (STEP/SKIP)] key.
The setting will be completed.
How do you cancel the memory skip?
Call up the memory channel to cancel, and then operate steps 3...](http://img.usermanuals.tech/thumb/5670/81919/w64_alinco_dj-x2-wideband-scanner_manual_d-35.png "Page 36
3
Operating in Expert Mode
36
Memory Skip
This function is for skipping the specified memory channel(s) when executing
the Memory scan.
To set the memory channel which you want to skip:
1Switch to Memory mode by pressing the [V/P/M (MW)] key.
2Call up the memory channel you want to skip.
3Press the [FUNC/ENTER] key.
F will appear on the display.
4Press the [PS (STEP/SKIP)] key.
The setting will be completed.
How do you cancel the memory skip?
Call up the memory channel to cancel, and then operate steps 3...")
31 3 Operating in Expert Mode 3Select a bank by pressing the [10MHz (BANK)] key. Every press of the [10MHz (BANK)] key changes the bank at the upper left on the display as shown below. 0 Ý1 Ý2 ··· Ý9 ÝA ÝP ÝJ Ý0 ··· Each bank No. corresponds to the following bank. 0 - 9 : For Memory channel A, B : For Program scan channel P : For Priority channel J : For Search-pass memory channel Select a bank according to the use. 4Select a channel by pressing the [s / t] keys. According to the type of bank, available channels are different as shown below. Bank 0 - 9 : 00 - 69 Bank A, B : A00 - B19 Bank P : 00 - 07 Bank J : 00 - 99 5Press the [V/P/M (MW)] key. The setting will be completed. Tip· It is not possible to increase the number of memory channels. · It is not possible to overwrite the memory in the default setting. For more infor- mation, see OV (Overwrite) setting (P.43). WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE 5 Channel No. 4 WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE23F appears. Bank No.
3 Operating in Expert Mode 32 nSelecting a channel To call up a frequency programmed in a channel: 1Switch to the Memory mode by pressing the [V/P/M (MW)] key. 2Select a bank by pressing the [10MHz (BANK)] key. 3Select a channel by pressing [s / t] keys. It is not possible to select a channel which is not programmed. nClearing a channel To clear a channel: 1Switch to the Memory mode by pressing the [V/P/M (MW)] key. 2Select a channel which you want to clear. 3Press the [FUNC/ENTER] key. F will appear on the display. 4Press the [V/P/M (MW)] key. The channel will be cleared. TipYou can clear all the programmed channels at one time. For more information, see Resetting (P.25). WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDEChannel No. 3 2 Bank No.
33 3 Operating in Expert Mode Setting the Antenna You can select the antenna depending on the frequency you wish to receive. The DJ-X2 has three types of antennas. External antenna ···························The SMA antenna attached to the DJ-X2. Earphone antenna·························The earphones cord performs the role of antenna. Bar antenna···································The internal antenna which receives AM radio. (DJ-X2T: 530 kHz - 1710 kHz (step: 10 kHz), DJ-X2E: 522 kHz - 1620 kHz (step: 9 kHz)) nWhen receiving any frequency except AM radio 1Press the [FUNC/ENTER] key. F will appear on the display. 2Press the [1MHz (ANT)] key. EAr on/oF (which shows the status of the earphone antenna) will appear on the display. 3Select ON or OFF by pressing the [s / t] keys. EAr on : Receives with the earphone antenna. EAr oF : Receives with the external antenna. (The default setting is OFF.) 4Press the [FUNC/ENTER] key. The setting will be completed. TipWhen using the earphone antenna, a signal may be unstable depending on the position of the earphone cord. WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDESelect ON/OFF. 3 2 1,4
3 Operating in Expert Mode 34 nWhen receiving AM radio At steps 1 and 2 mentioned on the previous page, bAr on/oF (which shows the status of the bar antenna) appears on the display. bAr on : Receives with the bar antenna. bAr oF : Receives with the external antenna or earphone antenna. (The default setting is ON.) Pressing the [FUNC/ENTER] key completes the setting. Selecting the Modulation Mode You can select a modulation mode from AM, FM, and WFM. To select : 1Press the [FUNC/ENTER] key. F will appear on the display. 2Choose modulation mode by pressing the [SCAN (MODE)] key. Every press of the [SCAN (MODE)] key changes the display as shown below. AM ÝFM ÝWFM ÝAM ··· 3Press the [FUNC/ENTER] key. The setting will be completed. If the modulation mode cannot be changed... When the tuning step is set to AUTO, you cannot select modulation. For more information, see the next section Setting the Tuning Step. WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE 2 F appears.Select AM, FM, or WFM. 1,3
35 3 Operating in Expert Mode Setting the Tuning Step The tuning step sets the increment/decrement of each press of the [s / t] keys when adjusting the frequency in VFO mode. To set the tuning step: 1Switch to VFO mode by pressing the [V/P/M (MW)] key. 2Press the [FUNC/ENTER] key. F will appear on the display. 3Press the [PS (STEP/SKIP)] key. The currently selected tuning step will appear on the display. The default setting is AUTO. 4Select a tuning step by pressing the [s / t] keys from the followings. 5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100, and AUTO. (unit : kHz) 5Press the [FUNC/ENTER] key. The setting will be completed. Tip· When AUTO is selected, the suitable tuning step and modulation mode are automatically selected. When AUTO is selected, you cannot change the modu- lation mode. · The tuning step in AM radio is fixed to 9 kHz (DJ-X2E). WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE F appears. 4 3Tuning step2,5
3 Operating in Expert Mode 36 Memory Skip This function is for skipping the specified memory channel(s) when executing the Memory scan. To set the memory channel which you want to skip: 1Switch to Memory mode by pressing the [V/P/M (MW)] key. 2Call up the memory channel you want to skip. 3Press the [FUNC/ENTER] key. F will appear on the display. 4Press the [PS (STEP/SKIP)] key. The setting will be completed. How do you cancel the memory skip? Call up the memory channel to cancel, and then operate steps 3 and 4 above. WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE3 Appears. 4
37 3 Operating in Expert Mode Descrambling This function returns scrambled voice to normal reception. To descramble: 1Select the frequency of the scrambled voice. 2Press the [FUNC/ENTER] key. F will appear on the display. 3Press the [MONI (SCRT)] key. Descrambling function starts operating, and l at the upper left of the dis- play flashes. Decode No. for scrambling will appear on the display. You can change the decode No. by pressing the [s / t] keys. 4Select a decode No. by pressing the [s / t] keys. Select a decode No. from 01 to 17. Select the No. which allows you to rec- ognize the voice. TipPressing the [FUNC/ENTER] key allows you to descramble the voice using the specified decode No., and change the frequency at the same time. How do you cancel the descrambling function? Press the [FUNC/ENTER] key, then the [MONI (SCRT)] key. WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE Flashes. 2 4 3Decode No.
3 Operating in Expert Mode 38 Operational Settings This function allows you to customize the DJ-X2 for your particular application. The following items can be set in the setting mode. ATT (Attenuator) function (P.39) Bank link setting (P.39) Beep function (P.40) Lamp function (P.40) Timer scan/Busy scan setting (P.41) BS (Battery save) function (P.41) APO (Auto power off) function (P.42) Bugging detector sensitivity setting (P.42) OV (Overwrite) setting (P.43) PRIO (Priority) Watch (P.43) nSetting each item All the items of the setting mode are set by the same operation. 1Press the [FUNC/ENTER] key. F will appear on the display. 2Press the [VOL/SQL (SET)] key. The item name will be displayed. 3Select an item by pressing the [VOL/SQL (SET)] key. Each press of the [VOL/SQL (SET)] key changes the item as shown below. Att ÝbL ÝbEEP ÝLP Ý tIMEr (or bUSy) Ý bS Ý APO Ý tAP Ýov ÝPr ÝAtt ··· 4Change the value or setting by pressing the [s / t] keys. 5Press the [FUNC/ENTER] key. The setting will be completed. For detailed information of each item, see the following. WIDE BAND COMMUNICATION RECEIVER DJ-X20.5 ~ 1000MHz 700 MEMORY CHANNELSRX FREQUENCYX2 V / P / M 1MHz SCAN VOL/SQL M W ANT MODESET MONI 10MHz P S FUNC SCRT BANK STEP/SKIP ENTERDOWN UP BATTERY ~~ EXTERNALLithium-ionBATTERY INSIDE 4 1,5 2,3 Item F appears.
39 3 Operating in Expert Mode nATT (Attenuator) function This function attenuates strong signals on nearby channels. Use this function when the received signal is influenced by a strong signal. ATT function attenuates about 20 dB in received signal. Select Att in the setting mode. · Select ON/OFF by pressing the [s / t] keys. · The default setting is OFF. nBank link setting This is the setting for the Bank link scan, which scans specified multiple banks. You can select up to 5 banks from 10 programmed banks. Select bL in the setting mode. · Select Bank link No. by pressing the [s / t] keys. · Select a bank to link by pressing the [10MHz (BANK)] key. One bank can be assigned to each bank link No. 0-4. Tip· When only one bank is set to the bank link, if you execute the bank link scan, only one bank will be scanned. · For more information, see Memory Scan. (P.21) · Bugging detector detects the listening microphone from bank-linked memories. When using the bugging detector, corresponding banks must be linked. When using the bugging detector, bank No. 0 must be included in bank link setting. Bank No.Bank link No. Select ON/OFF.
3 Operating in Expert Mode 40 nBeep function The beep sound which sounds when operating keys on the DJ-X2 can be turned OFF. Select bEEP in the setting mode. · Select ON/OFF by pressing the [s / t] keys. · The default setting is ON. nLamp function This function sets the display backlight ON or OFF. When ON is selected, an operation of any key turns ON the backlight, and it automatically turns OFF after 5 seconds. Select LP in the setting mode. · Select ON/OFF by pressing the [s / t] keys. · The default setting is OFF. · Batter life may decrease when set to ON. Select ON/OFF. Select ON/OFF.