Aleratec DVD CD RoboRacer LS Fully Automatic LightScribe Publisher User Guide

www.aleratec.com27
Using Ro\foRacer LS to\o Burn an ISO Disc
1. Start the RoboRacer LS software.
2. Select the “Disc Recording” button.
3. Click the Go! button and you will now see a display box that will ask 
you to choose several options.  The first option is the image file that 
you would like to duplicate.  Click the “Browse” button to find the 
image file you want. Then choose either CD or DVD media depending 
on the media you are going to use. Type in how many copies you 
would like from 1 to 100,...

www.aleratec.com28
Using Ro\foRacer LS to\o Burn an ISO Disc - continued 
4. The screen will return to this display and the RoboRacer LS will burn 
the number of discs required.
5. When finished the display will show the job as successful.  

www.aleratec.com29
LightScri\fe La\feling\o
The following shows you how to print a batch of LightScribe labels.
1. Start at the RoboRacer LS main screen.
2. Choose the “LightScribe Labeling” Option.  

www.aleratec.com30
LightScri\fe La\feling\o - continued
3. Click the “Go!” button to set the RoboRacer in the auto-load mode.
4. Open Nero Express Essentials and choose the “Print LightScribe 
Labels” menu. If there is no “Print LightScribe Label” icon on the left 
side menu go to step 5.  Sometimes the “Print LightScribe Label” in 
the right side menu can be grayed out.  If it is, click on the grayed out 
icon and a display box will prompt you to select the current recorder.  
Click “Yes” and the “Print...

www.aleratec.com31
5. If the “Print LightScribe Label” option is not on the screen, go to the 
screen as shown below.  To get to this screen, refer to “Creating an 
Image with Nero”  and follow steps 2 through 5.  The screen below is 
the same screen as described in step 5.  While going through steps 2 
through 5, you do not need to set up any files, simply use the “Next” 
button until you see this screen.  Then, select the “Current recorder” 
dropdown box and choose the “ALERATEC DVDRW 20A1H” as the...

www.aleratec.com32
LightScri\fe La\feling\o - continued
7. In this screen choose the print quality that you would like as well as the 
number of discs to print.  Also make sure that the selected drive is listed 
as “ALERATEC DVDRW 20A1H”.  When these settings are complete 
click the “Print” button.  “Auto Labeling” will begin after a short delay.
8. When the LightScribe labeling job has been completed Nero will 
display this screen.
The RoboRacer display will be similar to this.  

www.aleratec.com33
Technical Support Addresses and
Phone Numbers
 ►By e-mail: [email protected]\K
 ►By Telephone: 1-818-678-0484
Technical Support G\Aroup can \be reached\A 8:00 AM to 5:00 PM, 
Pacific Time, Monday throug\Ah Friday, excluding U.S. hol\Aidays.
Please try to call\A from a phone near\A your computer sys\Atem.
 ►Access is availa\ble\A 24 hours a day, 365 days a year, via:
The World Wide We\b at: www.aleratec.com
FAX at: 1-818-678-0483  

Docum\fnt \bumb\fr: 9399046_E\bG_R\fv. E  Copyright © 2011
Sp\fcifications subj\fc\mt to chang\f without not\mic\f.  
Al\frat\fc, Inc.
9851 Ow\fnsmouth Av\fnu\f
Chatsworth, CA 91311\m U.S.A.
www.aleratec.com