Aleratec DVD CD RoboRacer LS Duplex WinMac User Guide

www.aleratec.com15
Using the Ro\foRacer \oLS Duple\b Win/Mac
\breating an Image Fi\ule from Data on you\ur \bomputer
1. Start the Nero Express Essentials program.
2. The screen below will be displayed. 
For this example choose “Data” and Data CD”. 
  

www.aleratec.com16
Using the Ro\foRacer \oLS Duple\b Win/Mac
Creating Image Fil\oes
\breating an Image Fi\ule from Data on you\ur \bomputer  
- continued 
3. Add any data file by using the “Add” option or by dragging and 
dropping a file or files into the large white area. When finished adding 
files, click the “Next” button.
4. The next display you will see is a label printing screen. Un-check the 
“Print Label” box at the bottom center of the display and click the 
“Next” button.   

www.aleratec.com17
Using the Ro\foRacer \oLS Duple\b Win/Mac
5. In the final display before creating an image, make sure that “Image 
Recorder” in the dropdown menu to the right of “Current Recorder” 
is selected. Fill out the disc name if needed, and when ready, press the 
“Burn” button at the lower right. 
6. After the burn button is pressed, the “Save Image File” screen will 
appear. In the lowest dropdown menu called “Save as type:” select 
“ISO Image Files (.iso)”. You may also save the image as an...

www.aleratec.com18
Using the Ro\foRacer \oLS Duple\b Win/Mac
Creating Image Fil\oes
\breating an Image Fi\ule from Data on you\ur \bomputer  
- continued 
7. After clicking the “Save” button the “Write Progress” screen will 
appear. 
8. The image process is successful when Nero displays this screen.   

www.aleratec.com19
Using the Ro\foRacer \oLS Duple\b Win/Mac
Burn from Disc Imag\oe
To do an image burn to a DVD or CD, first load your RoboRacer LS Duplex 
Win/Mac with the proper amount of media with the disc labels facing up, 
the data side facing down.  Then, install the output bin and bin holder into 
the top output bin position on the left side of the device.
1. Start the RoboRacer LS Duplex Utility software.
2. Select the “Burn from Disc Image” mode in the drop down menu.
3. Click the “Go!” button...

www.aleratec.com20
Using the Ro\foRacer \oLS Duple\b Win/Mac
Burn from Disc Imag\oe - continued 
4. The screen will return to the main display and the RoboRacer LS 
Duplex Win/Mac will burn the number of discs requested.
5. When finished the display will show the job as successful and the 
RoboRacer LS Duplex Utility will be ready for the next job.  

www.aleratec.com21
Using the Ro\foRacer \oLS Duple\b Win/Mac
LightScri\fe La\felin\og
The following shows you how to print a batch of LightScribe labels using 
the LightScribe mode of the RoboRacer LS Duplex Utility.  Before starting, 
load the RoboRacer LS Duplex Win/Mac with LightScribe media, with the 
LightScribe portion facing down (label side of disc).
1. Open Nero Express Essentials and choose the “Print LightScribe 
Label” icon on the left side menu and then click on the “Print 
LightScribe...

www.aleratec.com22
Using the Ro\foRacer \oLS Duple\b Win/Mac
LightScri\fe La\felin\og - continued
2. After entering the LightScribe menu, the first screen you will see is 
the disc layout. Choose the print design from a file or create your own. 
When you are done, click “Next”.
3. In this screen, choose the print quality as well as the number of discs to 
print.  When the settings have been completed, do not press the “Print” 
button; instead, go to the RoboRacer LS Duplex Utility main menu.
NOTE: It is...

www.aleratec.com23
Using the Ro\foRacer \oLS Duple\b Win/Mac
NOTE: For all Lig\ftScrib\ue modes, Nero \bover\u Designer may be us\ued 
instead of Nero Expr\uess to setup t\fe Li\ug\ftScribe Label. If \uyou are 
using Nero \bover Des\uigner leave t\fe soft\uware at t\fe “Lig\ftSc\uribe Print 
Properties” menu an\ud do not press Pri\unt.
4. Open the RoboRacer LS Duplex Utility and choose the “LightScribe 
Labeling” mode from the drop down menu and then click “Go!”
  
NOTE: You will occasionall\uy see t\fe...

www.aleratec.com24
Using the Ro\foRacer \oLS Duple\b Win/Mac
LightScri\fe La\felin\og - continued
The RoboRacer LS Duplex Utility, once started, will automatically 
select the proper drive for LightScribe operation and press the Print 
button on the Nero Express Menu.  The Utility will then complete up to 
99 consecutive LightScribe prints.
5. After completion, the RoboRacer LS Duplex Utility will return to its original 
status and a new job can be assigned.