Aleratec 17 DVDCD Copy Tower Duplicator User Guide

www.aleratec.com5
Precautions
Before installing your DVD/CD Copy Tower, please read the following.
Installation
Avoid placing the DVD/CD Copy Tower in a location subject to:
• High humidity
•  High temperature
•  Excessive dust
•  Mechanical vibration
•  Direct sunlight
•  Electromagnetic radiation
Power
This product has a manually switchable power supply. Make sure 
that the power supply is set to the proper voltage for your region.
Input Voltage Selection
There is a voltage selection switch on the back...

www.aleratec.com
6
Overview
Main Menu
This section provides a listing of the functions on the DVD/CD Copy 
Tower. Detailed descriptions of each function are given in the next section. 
The functions are numbered for easy reference; these numbers are also used 
in the next section.
There are 8 main menu items that will display in the DVD/CD Duplicator 
Display Panel. These are:
1. Copy5. Set Burn Speed
2. Test6. Select Source
3. Compare7. Utility
4. Copy + Compare8. Setup  

www.aleratec.com7
Overview
Subfunctions
The main menu “Utility” function has 7 subfunctions. These are:
7.1 Information
7.2 Erase Disc
7.3 Prescan Source
7.4 Track Edit
7.5 Eject All Disc
7.6 Copy Counter
7.7 Update BIOS
7. Utility
7.1.1 Disc Info
7.1.2 Drive Info
7.1.3 System Info
7.2.1 Quick Erase
7.2.2 Full Erase
7.4.1 Copy Track
7.4.2 Close Disc
7.4.3 Disc Info
7.6.1 Show Count
7.6.2 Enable Counter
7.6.3 Clear Counter  

www.aleratec.com
8
Overview
Subfunctions
The main menu “Setup” function has 9 subfunctions. These are:
8.1 Auto Start Time
8.2 Display Mode
8.3 Button Beep
8.4 Eject On Start
8.5 Reader Speed
8.8 Clear Setup
8. Setup
8.2.1 Show Speed
8.2.2 Basic
8.2.3 Show Timer
8.4.1 Eject All Discs
8.4.2 Do Not Eject
8.4.3 Eject Target Only
8.4.4 Eject Source Only
8.6 Compare Speed
8.7 Language
8.4.5 Eject All Trays
8.9 Advanced Setup    
            *See Advanced Setup functions on next page.
8.5.1 CD 1 to Max
8.5.2...

www.aleratec.com9
Overview
Subfunctions - continued 
The “Advanced Setup” function has 10 subfunctions. These are:
 
 
8.9.1 Power On Time
8.9.2 Start-up Menu
8.9.3 Skip Read Error
8.9.4 Change Bad Master Disc
8.9 Advanced Setup
8.9.5 CD Overburn
8.9.6 Keep Buffer
8.9.7 Boot Password
8.9.8 Setup Password
8.9.9 Count Password
8.9.10 Eject Tray If no Disc  

www.aleratec.com
10
Using the DVD/CD Copy Tower
Inserting Discs
1.  Press the Eject button on each drive for which you’ll be inserting a disc.
2.  Place the disc in the tray. The printed (non-shiny) surface of the disc 
should be up.
3.  To close the tray, press the Eject button or lightly push the front center 
of the tray.
Note: 
• Never place two discs in the tray at the same time.
•  Do not touch the surface of the disc where it has been recorded.
Ejecting Discs
Disc copies will Auto Eject upon...

www.aleratec.com11
Using the DVD/CD Copy Tower
Main Menu
Functions are selected with the arrow buttons ( or).  The numbers 
correspond to the Function listing in the previous section.
Copy 
During the duplication process, data will be simultaneously written to all 
blank discs loaded in the DVD/CD Copy Tower. Please make sure the 
source disc is placed in the Source Drive.
1.  Place blank discs into the DVD/CD Recorders as needed; when the 
DVD/CD Recorders detect the discs are present, press the  OK...

www.aleratec.com
12
Using the DVD/CD Copy Tower
Main Menu
Test 
This function is a test process that simulates data being written to the 
blank disc, without actually burning a DVD or CD. When the test process 
is complete, the discs will remain blank. For ±RW discs that contain data, 
“Test” will quick erase all old data before simulation. Therefore, never 
perform “Test” on ±RW discs that contain important data.
1.  Using the arrow buttons (or) select “Test”. Press the OK button to 
start the disc...

www.aleratec.com13
Using the DVD/CD Copy Tower
Main Menu
Compare
This function will compare the data on the source disc to the tar get discs 
after disc copy.
1.  Using the arrow buttons (or) select “Compare”. Press the  OK 
button to perform the disc compare, or press  ESC to exit. Press the 
OK button again to show detailed “Compare” information. The LCD 
display shows information for the source.
 
 
 
 
2.  When the comparison is completed, the LCD will display the result.
 
3. Compare
Compare Resu...

www.aleratec.com
14
Using the DVD/CD Copy Tower
Main Menu
Compare - continued 
5.  If the comparison fails, the LCD will display the number of discs that 
failed and passed.
6.  Press the OK button again for the status of each copy. If the 
comparison fails, the LCD will display the reason for the failure.
Compare  OK: 2
Fail: 1  Diff: 0
Src: 02 DVD-RW
TOC not match