Aleratec 14 Bluray DVD CD Tower Duplicator SA User Guide

www.aleratec.com15
Tower Duplicator SA: Tutorials
Making Disc-to-Disc Copies - continued
e. 2 or 3 seconds after copying begins the following “Copy Progress” screen 
will appear:
Note: It is normal to see the progress indicator stay at 0-10% and 
at 100% for approximately 30 seconds during CD duplication. 
Additionally it is normal to see the progress indicator stay at 0-10% 
and at 100% for up to 1 minute during DVD duplication. There 
is a delay caused by the initializing and finalizing stage of disc...

www.aleratec.com16
COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
To continue making additional copies, remove the successfully completed copies 
from the ejected trays and replace with blank discs. To terminate your project and 
return to the main menu, press ESC. 
If you’ve specified a counter value you will see the following display when your 
project is completed:
If you see above message, you can press ENT to go back to main menu.
Note: If you enabled the counter and the number of...

www.aleratec.com17
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Load Source Files onto the Hard Drive - continued 
You can create a new partition by either loading it directly from a Master Disc 
or by copying it directly onto the Hard Drive through the tower publisher’s USB 
connection.  Here we will discuss loading source data directly onto the Hard Drive.  
The next section will explain how to load a partition from a Master Disc.
 
The tower publisher...

www.aleratec.com18
c. Press ENT to submit your selection. After your selection has been 
submitted, you will see the following display:
2. Load your Master Disc onto the Hard Drive.
a. Use the UP or DOWN arrow button to navigate to the following screen.
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Load Master Disc onto the Hard Drive
The following steps will show you how to load your Master...

www.aleratec.com19
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Load Master Disc onto the Hard Drive - continued 
b. Press ENT to enter “Hard Drive Setup” menu and you will see the 
following display:
c. Load your Master Disc on to the Hard Drive. To do so, use the UP or 
DOWN arrow button to navigate to the following screen.
d. Press ENT to enter “Load Partition” menu and you will see the following 
display:
The “228GB”...

www.aleratec.com20
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
e. You now have the choice to load your Master Disc into a new (empty) 
partition or overwrite one of the existing partitions (if any exist) by 
inputting/modifying the name you desire; or you can simply choose “Auto 
Generate” to have the system automatically generate a partition name for 
you. Afterwards, simply press the UP or DOWN arrow button to find your...

www.aleratec.com21
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Load Master Disc onto the Hard Drive - continued
h. Press ENT button to confirm. Once your Master Disc has been recognized. 
The loading progress indicator will be displayed and you will see the 
following:
i. Once your Master Disc has been loaded completely, you will see the 
following display:
Press the ENT button to go back to the “Hard Drive Setup” menu.
“4000MB” indicates the total...

www.aleratec.com22
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Rename Existing Hard Drive Partition Name
When you load your Master Disc to a hard drive partition, you are asked to give it a 
name. You can rename it at anytime afterwards (including the Reserved Partition). 
To rename your existing hard drive partition name, do...

www.aleratec.com23
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Rename Existing Hard Drive Partition Name - continued
7. Rename the partition you’ve just selected.
To enter a partition name, use the UP or DOWN button to select the character 
and use ESC or ENT button to move the cursor position. When you are 
finished, move the cursor to OK and press ENT. For example, if I want to 
rename the image from “FUN” to “FUN2”, do...

www.aleratec.com24
COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


COPYUSBPRESCANSOURCE
ESCENT


Tower Duplicator SA: Tutorials
Delete Existing Hard Drive Partition Permanently
If for some reason you need to delete your existing hard drive partition permanently, 
do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup”...