Aleratec 13 HDD Copy Dock Duplicator User Guide
Here you can view all the pages of manual Aleratec 13 HDD Copy Dock Duplicator User Guide. The Aleratec manuals for Hard Disk are available online for free. You can easily download all the documents as PDF.
Page 11
www.aleratec.com5 HDD Duplicator1-1 ver: 0.92\f UP DOWN ENT ES\fPOWER Overview \fhanging to Duplica\Htor Mode from P\f Mo\Hde (Doc\b) During the normal power-up sequence of the HDD Copy Dock Duplicator, the following information will be displayed: • Power on unit: • Press either the UP, DOWN, ESC or ENT button to display: • Press the ENT button to display: • Press the ENT button to continue into Duplicator Mode: • You are now in Duplicator Mode: HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD...
Page 12
www.aleratec.com6 Using the HDD \fopy D\Hoc\b Duplicator Loading Hard Drives\H 1. Use the included power adapter and cord to plug the HDD Copy Dock Duplicator into a power outlet. 2. Insert the SATA Hard Drive you want to copy into the slot marked “SOURCE DISK 4”. When inserting, align the SATA port on the Hard Drive with the SATA connector in the drive bay slot. Press the “SOURCE DISK 4” power button on the front of the unit to power up the drive. 3. Insert the destination SATA Hard Drives into...
Page 13
www.aleratec.com7 Using the HDD \fopy D\Hoc\b Duplicator Duplicator Mode Main Men\f: Copy HDD\y The “Copy HDD” function performs an actual copy from the source HDD to the target HDD. The target HDD must be at least as large as the source. The HDD Copy Dock Duplicator will copy every block of capacity on the source HDD. 1. Load the source HDD and the target HDD(s) into the HDD Copy Dock Duplicator. The system will auto-detect the hard drives. After the drives have been detected, a screen similar...
Page 14
www.aleratec.com8 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator Duplicator Mode Main Men\f: Compare \yHDD The “Compare HDD” function performs a comparison of data from the source hard drive to the data on the target hard drive. 1. With the source and target HDDs loaded use the arrow buttons to select “Compare HDD”. The...
Page 15
www.aleratec.com9 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator Duplicator Mode Main Men\f: ReScan B\y\fs The “ReScan Bus” function causes the HDD Copy Dock Duplicator to redetect connected hard drives. This can be used when you change drives without restarting the system. 1. Use the arrow buttons to select “ReScan BUS”. The following screen will be displayed: 2. Press...
Page 16
www.aleratec.com10 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator Duplicator Mode Main Men\f: So\frce S\yize The “Source Size” function is used to display the capacity of the source hard drive. 1. With the source HDD loaded, use the arrow buttons to select “Source Size”. The following screen will be displayed: 2. Press ENT to display the capacity of the source hard drive. 4. Source Size Source \fapacity:...
Page 17
www.aleratec.com11 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator Setup Set\fp Men\f The “Setup” menu contains configuration options for the HDD Copy Dock Duplicator. It is suggested to use the factory defaults for optimum performance. 1. Use the arrow buttons to select “Setup”. The following screen will be displayed: Note: After changing any of\y the config\fration o\yptions, yo\f m\fst pre\yss ENT to accept the chan\yge. 5. Setup
Page 18
www.aleratec.com12 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator Duplicator Mode Set\fp Men\f: 5-1 A\fto Compare (Not S\y\fpported) Duplicator Mode Set\fp Men\f: 5-2 B\ftt\yon So\fnd This option allows you to enable or disable the beeping sound heard when you press a button. 1. Use the arrow buttons select “Setup”. The following screen will be displayed: 2. Press ENT...
Page 19
www.aleratec.com13 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator Duplicator Mode Set\fp Men\f: 5-3 Dev\yice Info This option displays information about any hard drives connected to the HDD Copy Dock Duplicator. 1. Use the arrow buttons to scroll to “Setup”. The following screen will be displayed: 2. Press ENT and use the arrow buttons to scroll to “Device Info”. The...
Page 20
www.aleratec.com14 HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER HDD Duplicator1-1 ver: UP DOWN ENT ES\fPOWER Using the HDD \fopy D\Hoc\b Duplicator P\f Mode PC Mode Set\fp 1. Use the arrow buttons to scroll to “PC Mode”. The following screen will be displayed: 2. Press ENT and use the arrow buttons to scroll to “PC Mode”. The following screen will be displayed: 3. Press ENT to select. The system...