Aleratec 121 USB Flash Drive Copy Cruiser Duplicator User Guide
Have a look at the manual Aleratec 121 USB Flash Drive Copy Cruiser Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 9
www.aleratec.com5
Using the USB Duplication Suite Software
Once you have added all the files/folders you want to copy, click the
5.
tab at the top of the window named “Destination”.
Click to select each USB flash drive that you want to copy to. You can
6.
click the button with the green “+” symbol to select all drives or\
the
button with the red “-” symbol to deselect all drives. The button with
the blue arrow will refresh the current list of drives.](http://img.usermanuals.tech/thumb/290/4940/w64_121-usb-flash-drive-copy-cruiser-duplicator-user-guide-1478720761_d-8.png "Page 9
www.aleratec.com5
Using the USB Duplication Suite Software
Once you have added all the files/folders you want to copy, click the
5.
tab at the top of the window named “Destination”.
Click to select each USB flash drive that you want to copy to. You can
6.
click the button with the green “+” symbol to select all drives or\
the
button with the red “-” symbol to deselect all drives. The button with
the blue arrow will refresh the current list of drives.")
![Page 10
www.aleratec.com
6
Using the USB Duplication Suite Software
Data Copy Only - continued
The “Processes” counter displays how many concurrent processes you\
7.
want to run at once. The more processes you choose the more drives
will be copied to simultaneously.
The “Copies” counter is the total number of copies you want to do.\
If
8.
the number of copies specified is more than the number of available
drive slots, the software will break up the job into multiple “rounds\
”,
requiring the user to...](http://img.usermanuals.tech/thumb/290/4940/w64_121-usb-flash-drive-copy-cruiser-duplicator-user-guide-1478720761_d-9.png "Page 10
www.aleratec.com
6
Using the USB Duplication Suite Software
Data Copy Only - continued
The “Processes” counter displays how many concurrent processes you\
7.
want to run at once. The more processes you choose the more drives
will be copied to simultaneously.
The “Copies” counter is the total number of copies you want to do.\
If
8.
the number of copies specified is more than the number of available
drive slots, the software will break up the job into multiple “rounds\
”,
requiring the user to...")
![Page 14
www.aleratec.com
10
Using the USB Duplication Suite Software
Format Only - continued
Select the drives that you wish to format. You can click the button with
3.
the green “+” symbol to select all drives or the button with the r\
ed
“-” symbol to deselect all drives. The button with the blue arrow will
refresh the current list of drives.
You can specify a single label for each drive in the text box under
4.
“Enter Label”. If no label is specified, the label that the drive currently
has will be used.](http://img.usermanuals.tech/thumb/290/4940/w64_121-usb-flash-drive-copy-cruiser-duplicator-user-guide-1478720761_d-13.png "Page 14
www.aleratec.com
10
Using the USB Duplication Suite Software
Format Only - continued
Select the drives that you wish to format. You can click the button with
3.
the green “+” symbol to select all drives or the button with the r\
ed
“-” symbol to deselect all drives. The button with the blue arrow will
refresh the current list of drives.
You can specify a single label for each drive in the text box under
4.
“Enter Label”. If no label is specified, the label that the drive currently
has will be used.")
![Page 15
www.aleratec.com11
Using the USB Duplication Suite Software
The “Processes” counter displays how many concurrent processes you\
5.
want to run at once. The more processes you choose the more drives
will be copied to simultaneously.
The “Copies” counter is the total number of copies you want to do.\
If
6.
the number of copies specified is more than the number of available
drive slots, the software will break up the job into multiple “rounds\
”,
requiring the user to switch in new cards after each...](http://img.usermanuals.tech/thumb/290/4940/w64_121-usb-flash-drive-copy-cruiser-duplicator-user-guide-1478720761_d-14.png "Page 15
www.aleratec.com11
Using the USB Duplication Suite Software
The “Processes” counter displays how many concurrent processes you\
5.
want to run at once. The more processes you choose the more drives
will be copied to simultaneously.
The “Copies” counter is the total number of copies you want to do.\
If
6.
the number of copies specified is more than the number of available
drive slots, the software will break up the job into multiple “rounds\
”,
requiring the user to switch in new cards after each...")
www.aleratec.com7 Using the USB Duplication Suite Software Once the drives, processes, and copies are specified, the user may click 9. “Start” to begin the duplication process. Progress is displayed through messages in the log and in the progress 10. bar. Also, the number of completed and rejected copies is displayed underneath the output log.
www.aleratec.com 8 Using the USB Duplication Suite Software Data Copy Only - continued If the user wishes to cancel the duplication process at any time, just 11. click “Cancel”.
www.aleratec.com9 Using the USB Duplication Suite Software Format Only Format one or more USB flash drives with this command (FAT formatting only). A volume label to identify the media is added at the same time. Note: The “Add File” interface will be disabled since it is not used. Start by clicking on “Format Only” from the drop down menu. 1. Click on the “Destination” tab located at the top of the window. 2.
www.aleratec.com 10 Using the USB Duplication Suite Software Format Only - continued Select the drives that you wish to format. You can click the button with 3. the green “+” symbol to select all drives or the button with the r\ ed “-” symbol to deselect all drives. The button with the blue arrow will refresh the current list of drives. You can specify a single label for each drive in the text box under 4. “Enter Label”. If no label is specified, the label that the drive currently has will be used.
www.aleratec.com11 Using the USB Duplication Suite Software The “Processes” counter displays how many concurrent processes you\ 5. want to run at once. The more processes you choose the more drives will be copied to simultaneously. The “Copies” counter is the total number of copies you want to do.\ If 6. the number of copies specified is more than the number of available drive slots, the software will break up the job into multiple “rounds\ ”, requiring the user to switch in new cards after each round is completed.\
www.aleratec.com 12 Using the USB Duplication Suite Software Format Only - continued Once the drives, processes, and copies are specified, the user may click 7. “Start” to begin the duplication process. Progress is displayed through messages in the log and in the progress 8. bar. Also, the number of completed and rejected copies is displayed underneath the output log.
www.aleratec.com13 Using the USB Duplication Suite Software If the user wishes to cancel the duplication process at any time, just 9. click “Cancel”.
www.aleratec.com 14 Using the USB Duplication Suite Software Format Then Data Copy This function will format and then copy files/folders to one or more USB flash drives. Any files/folders on the target device(s) with the same names as any source files/folders will be overwritten. Start by clicking on “Format Then Data Copy” from the drop down 1. menu. On the same screen, click “Add Files” to copy individual files or “Add 2. Folder” to copy an entire folder.
www.aleratec.com15 Using the USB Duplication Suite Software If you wish to remove an added file or folder, select the item and click 3. “Remove”. To clear the list of files/folders to add, click “Clear”. If you wish to verify the source data is copied successfully, click to 4. check the box next to “Verify Data”.
www.aleratec.com 16 Using the USB Duplication Suite Software Format Then Data Copy - continued Once you have added all the files/folders you want to copy, click the tab at 5. the top of the window named “Destination”. Select the drives that you wish to format. You can click the button with 6. the green “+” symbol to select all drives or the button with the r\ ed “-” symbol to deselect all drives. The button with the blue arrow will refresh the current list of drives.