Home > Aleratec > Hard Disk > Aleratec 116 HDD Copy Cruiser IDESATA HighSpeed Duplicator User Guide

Aleratec 116 HDD Copy Cruiser IDESATA HighSpeed Duplicator User Guide

Here you can view all the pages of manual Aleratec 116 HDD Copy Cruiser IDESATA HighSpeed Duplicator User Guide. The Aleratec manuals for Hard Disk are available online for free. You can easily download all the documents as PDF.

Page 21

www.aleratec.com15
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Copy - Continued
3. During the copy process the HDD Copy Cruiser IDE/SATA High-Speed will 
display progress information.
 
The amount of data remaining to be transferred (shown in gigabytes), and time 
will be displayed as the percentage of completion increases. 
Note: The copying speed, capacity and duration may vary from one hard drive to another. 
4. Once duplication is complete, a job status screen will be displayed.

ESC...

Page 22

www.aleratec.com16
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Compare
The “Compare” function performs a comparison of data from the source hard drive 
to the data on the target hard drives. 
1. With the source and target HDDs loaded use the arrow buttons (or) to 
select “Compare”. The following screen will be displayed. 
2. Press OK to begin the comparison. The system will auto-detect the hard drives.  
 
 
 
 
During the compare process, the HDD Copy Cruiser IDE/SATA High-Speed 
will...

Page 23

www.aleratec.com17
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Compare - Continued
3. When the comparison is completed, a job status screen will be displayed.

ESC
OKPass: 11  Fail: 0Time: 20:18  

Page 24

www.aleratec.com18
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Copy+Compare
The “Copy+Compare” function performs a copy and compare from a source HDD to 
one or more target HDDs. The target HDDs must be at least as large as the source. The 
HDD Copy Cruiser IDE/SATA High-Speed will copy every block of capacity on the 
source HDD. 
1. Load the source HDD and the target HDDs into the Copy Cruiser High-
Speed. The system will auto-detect the hard drives. After the drives have been 
detected, a...

Page 25

www.aleratec.com19
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Copy+Compare - Continued
3. During the copy process the HDD Copy Cruiser IDE/SATA High-Speed will 
display progress information.
 
 
 
 
 
 
 
The amount of data remaining to be transferred (shown in gigabytes), and time 
will be displayed as the percentage of completion increases. 
Note: The copying speed, capacity and duration may vary from one source hard drive to another. 
4. Once duplication is complete, a job status screen...

Page 26

www.aleratec.com20
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Overwrite
The “Overwrite” function will sanitize (wipe clean of all data) the hard disk drives 
connected to the HDD Copy Cruiser IDE/SATA High-Speed. 
1. Load up to 25 HDDs into the HDD Copy Cruiser IDE/SATA High-Speed. The 
system will auto-detect the hard drives. Using the arrow buttons (or) select 
“Overwrite”. The following screen will be displayed. 
Note: Overwriting the entire capacity of all connected hard drives can...

Page 27

www.aleratec.com21
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Overwrite
 A.			Quick	Overwrite	-	Continued
A3. When the process is finished, the following screen will be shown. 
B.			Full	Overwrite
B1. To perform a Full Overwrite, scroll to “Full Overwrite” and press OK. The 
following screen will be displayed. 
B2. The estimated time elapsed for the Full Overwrite process will be displayed. 
B3. When the process is finished, the following screen will be shown.       

ESC
OKQuick...

Page 28

www.aleratec.com22
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Overwrite 
C.			3-Pass
C1. To perform a 3-Pass Overwrite, scroll to “3-Pass” and press OK. The 
following screen will be displayed. 
C2. The estimated time elapsed for the 3-Pass process will be displayed. 
C3. When the process is finished, the following screen will be shown. 

ESC
OK[ 4. Overwrite ]4.3 3-Pass 

ESC
OKIn ProcessElapsed    13:30

ESC
OK3-Pass Pass: 11          Fail: 0  

Page 29

www.aleratec.com23
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Overwrite 
D.			3-Pass	+	Verify
D1. To perform a 3-Pass + Verify Overwrite, scroll to “3-Pass + Verify” and 
press OK. The following screen will be displayed. 
D2. The estimated time elapsed for the 3-Pass + Verify process will be displayed. 
D3. When the process is finished, the following screen will be shown. 

ESC
OK[ 4. Overwrite ]4.4 3-Pass + Verify 

ESC
OKIn ProcessElapsed    13:30

ESC
OK3-Pass + Verify Pass: 11...

Page 30

www.aleratec.com24
Using the HDD Copy Cruiser IDE/SATA High-Speed 
Main Menu
Overwrite 
E.			7-Pass	Overwrite
This method will write over the entire capacity of the hard drives connected to the 
HDD Copy Cruiser IDE/SATA High-Speed seven different times.  
DoD 5220.22M is the Department of Defense document that discusses both Three 
and Seven Pass Overwrite data wiping.  
E1. To perform a Seven Pass Overwrite, scroll to “7-Pass Overwrite” and press 
OK. The following screen will be displayed. 
E2. The...
Start reading Aleratec 116 HDD Copy Cruiser IDESATA HighSpeed Duplicator User Guide

Related Manuals for Aleratec 116 HDD Copy Cruiser IDESATA HighSpeed Duplicator User Guide

All Aleratec manuals