Aleratec 115 Bluray DVD CD Tower Duplicator SA User Guide
Have a look at the manual Aleratec 115 Bluray DVD CD Tower Duplicator SA User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
www.aleratec.com35 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Select the Source drive When making a copy, you will need to specify where the master is. Is it in the Source drive? Or is it an Image inside the Hard Drive? This tutorial will show you how to change the Master Reading Source to satisfy your needs. Basically, there are 3 scenarios that require you to select the Source drive. 1. Disc-to-Disc copy (Copy from 1st Tray) – This is the case when you would normally make copies on the fly. You need to set the “Source drive” as your Master Reading Source. 2. Hard Drive-to-Disc copy – If you want to make copies from your Hard Drive Image, you need to select the source as “Hard Drive”. There are three benefits to copy from Hard Drive: a. Performance – Duplicating form the Hard Drive will be able to boost duplication speeds. b. Stability – Duplicating from Hard Drive will stabilize the duplication process compared to the Disc to Disc duplicating. c. Convenience – With your Master Discs stored inside the Hard Drive, you can have access to each one easily. There is no need to carry your Master Discs; they are all stored inside the duplicator. 3. Disc-to-Disc copy (Copy from 2nd Tray) – This is the case when your Master Disc is full of scratches. You would need to use the Writer Tray as your Source to make a copy and use the new copy as your new master to make more copies. When you turn on your duplicator, after it has booted up, you should see the following signifying your duplicator is ready. a. Navigate to Source Selection Menu. Press UP or DOWN arrow button to navigate to the following screen. 1.001. COPY 1.007. Select Source
www.aleratec.com36 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials b. Enter “Source Selection” menu. Press ENT to enter into “Source Selection” menu. You will see the following display: Make sure it is located at “Drive 1 Port 0.0”. If not, press the UP or DOWN navigation button to search for it. There will be drive model information where XXXXXX is shown above. c. Select desired master reading device. Press the UP or DOWN button to select the desired master reading source. Then press ENT to submit your Source Selection. d. Once your selection has been changed successfully, you will see the following screen for 2 seconds: Then you will be directed back to the main menu: Drive 1 Port 0.0XXXXXX Drive 1 Port 0.0 Selected! Aleratec 1.007. Select Source
www.aleratec.com37 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Change the SETUP Settings Most of the internal settings and information are stored inside the “Setup” menu. To explore and modify these settings is simple. In the following example you will be modifying the “Auto Start” setting. Note: The default “Setup” is set for optimal performance. It is unnecessary to change this setting if you are satisfied with your duplicator performance. 1. Use the UP or DOWN arrow button to navigate to the following screen. 2. Press ENT to enter “Setup” menu. You will see the following display: 3. Use the UP or DOWN arrow button to navigate to the following screen. 4. Press ENT to enter “Auto Start Setting” menu. You will see the following display: 5. Use the UP or DOWN arrow button to modify the setting to “Full”. Press ENT to submit your selection. You will see the following display: 6. To modify more settings, go back to step 3. Otherwise, press ESC button to go back to main menu. Aleratec 1.0011. Setup Setup1. Language Setup2. Auto Start Auto StartAuto Setup2. Auto Start Aleratec 1.0011. Setup
www.aleratec.com38 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Audio CD Editing This procedure will guide you in using the “Mix Audio Tracks” feature. This process allows you to combine audio tracks from various CDs into a single customized audio CD. To use this feature you need a temporary storage location to hold your music before the duplicator can make it an audio CD. The following are temporary storage location choices: • Hard Drive: Choosing “Hard Drive” as the temporary storage location, you will be instructed to load your music files onto the Hard Drive. After all of your favorite songs are selected, you will be instructed to copy them onto a blank 80 min. CD-R media. • Blank CD-R Media: Choosing “Blank CD-R” as the temporary storage location, you will be instructed to copy your music files onto a blank CD-R you’ve inserted. After you are finished, you will be instructed to finalize the CD-R disc. 1. Turn on the duplicator. After the bootup is complete, you will see the following display: 2. Going to the “Mix Audio Tracks” menu. Press the UP or DOWN arrow button to navigate to the following screen. 3. If your duplicator does not have a Hard Drive installed, please skip to Step 4. If your duplicator does have a Hard Drive installed, you will see the following display: Press the UP or DOWN arrow button to select your temporary storage location. (Hard Drive or Blank CD-R Media) Aleratec 1.001. COPY Aleratec 1.0010. Mix Audio Tracks Edit Track To:Blank CD
www.aleratec.com39 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Audio CD Editing - continued 4. Once you made your selection, you will see the following display: OR When you see the above display, insert an audio CD that contains your music track(s) in the Master Reading Tray and a blank CD-R media into one of Writer Trays. Note: If either one of the above screens is shown for more than 2 minutes, please check your Master Disc or Blank Discs for quality. Please allow 5-10 seconds for the duplicator to detect your Master Disc and Blank Discs as well. After your Master Disc and Blank Discs have been recognized, you will see the following display: 5. Once the previous screen is displayed, press the UP or DOWN arrow button to display the information on each track of the audio CD. Press ENT to select a track to be copied. Once a track is selected, you will see “*” on the left of the track number on the 2nd line. You will also see the total tracks and total playtime you have selected. Once you have finished selecting the tracks to be copy, press the UP or DOWN arrow button until you see “ARE YOU DONE?”. You will see the following display: Preparing...Waiting for Master Preparing...Waiting for Blank Total: 0 Trk 0m : 0sTrack 1: 4m :31s Total 6 Trk 26m : 17sAre you done?
www.aleratec.com40 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Audio CD Editing 6. Press ENT button to submit your selection. You will see the following display: Warning: If the capacity of total audio tracks you have selected is more than your blank CD-R disc’s capacity, you will see the following two screens flashing: If you see the above messages, press ENT button to continue. Once the Copying process is complete, you will see the following display: 7. You now have the choice to finalize it (mark the completion) or insert another audio CD with additional music files. If you choose to insert another audio CD with additional music files, press the DOWN arrow button until you see the following display: “1” indicates that it is working on track #1. “4m:37s” indicates the track’s playback time.. Auto Editing 1 4m : 37s OVER BLANK DISC CAPAPress OK to Continue BLANK DISC CAPACITYPress OK to Continue Total 6 Trk 26m : 17sFinish Editing? > Total 6 Trk 26m : 17sInsert Next Master?
www.aleratec.com41 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Audio CD Editing - continued 8. Press ENT button to continue. Your old Master Disc will be ejected and you can insert another audio CD into the Reading Tray. To continue, go back to Step 3. 9. If you choose to finalize it, press the DOWN arrow button until you see the following display: Press the ENT button to continue. You will see following confirmation display: Press the ENT button again to confirm the finalization. During the finalization process, you will see following progress indicator: OR When the whole process completes, your mixed copy will be ejected and you will see the following display: You will then be directed back to the main menu: Total 6 Trk 26m : 17sFinish Editing? > Total 6 Trk 26m : 17sConfirm to Finalize? Processing to Disc... 10% Finalizing...Please Wait Job Completed!Press OK to Finish Aleratec 1.0010. Mix Audio Tracks
www.aleratec.com42 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Example of Mixing Audio Tracks to the Hard Drive In this example we will be creating a new Audio CD from 2 different discs: ▪CD1: song 2, and song 4 ▪CD2: song 3, song 4 and song 5 1. Go to function 10 “Mix Audio Tracks”. 2. Press ENT button. 3. Use the UP or DOWN arrow button to select “Hard Drive”. Press ENT button to continue. 4. Insert CD1 into the 1st Drive and a blank CD into the 2nd Drive. 5. Wait until the following screen appears. 6. Use the UP or DOWN arrow button until you see “Track 2” on the 2nd line of the display. Press ENT to confirm. A “*” symbol will appear on the left of “Track 2”. You will see the following display: 7. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line, and then press ENT to confirm. A “*” symbol will appear on the left of “Track 4” like following: Aleratec 1.0010. Mix Audio Tracks Total: 0 Trk 0m : 0sTrack 1: 4m :03s Total: 1 Trk 4m : 49s*Track 2: 4m :49s Total: 2 Trk 9m : 47s*Track 4: 4m :58s
www.aleratec.com43 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials Audio CD Editing - continued 8. Use the UP or DOWN arrow button until you see following display: 9. Press ENT to submit your selection. You will see the following display: 10. Once the loading process is complete, you will see the following display: 11. To continue with your music selections, press the DOWN button once and you will see following display: 12. Press ENT button to continue. Insert CD2 into the Reader Tray. When CD2 is recognized you will see the following display. 13. Use the UP or DOWN arrow button until you see “Track 3” on the 2nd line of the display. Press ENT to confirm. A “*” symbol will appear on the left of “Track 3”. You will see the following display: Total: 2 Trk 9m : 47sAre you done? Auto Editing... 3 4m : 58s Total: 2 Trk 9m : 47sFinish Editing? > Total: 2 Trk 9m : 47sInsert Next Master? Total: 2 Trk 9m : 47sTrack 1: 4m : 03s Total: 3 Trk 14m : 35s*Track 3: 4m : 47s
www.aleratec.com44 COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT COPYUSBPRESCANSOURCE ESCENT Tower Duplicator SA: Tutorials 14. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line of the display. Press ENT to confirm. A “*” symbol will appear on the left of “Track 4”. You will see the following display: 15. Use the UP or DOWN arrow button until you see “Track 5” on the 2nd line of the display. Press ENT to confirm. A “*” symbol will appear on the left of “Track 5”. You will see the following display: 16. Use the UP or DOWN arrow button until you see following: 17. Press ENT to submit your selection. You will see the following display: 18. Once the loading process to the hard drive is complete, you will see following display: 19. When you have finished selecting all of our tracks, press the ENT button to finalize. You will see the following display: Total: 4 Trk 20m : 01s*Track 4: 5m : 26s Total: 5 Trk 24m : 29s*Track 5: 4m : 27s Total: 5 Trk 24m : 29sAre you done? Auto Editing... 3 4m : 47s Total: 5 Trk 24m : 29sFinish Editing? > Total: 5 Trk 24m : 29sConfirm to Finalize?