Aleratec 1118 USB Copy Tower SA USB Flash Drive Duplicator User Guide
Here you can view all the pages of manual Aleratec 1118 USB Copy Tower SA USB Flash Drive Duplicator User Guide. The Aleratec manuals for Hard Disk are available online for free. You can easily download all the documents as PDF.
Page 31
www.aleratec.com25 Using the USB Duplicator 6.5 Full Erase USB Full Erase USB is a function what will erase all data on the target USB flash drive. Note: The Full Erase USB will completely erase data of each of the target flash drives This function will also clear the FAT table in the flash drive. You will not be able to read the flash drive on PC until it is re-formatted. 1. Use UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen. Press the OK button to select...
Page 32
www.aleratec.com26 Using the USB Duplicator Main Menu 7. Setup This function includes 8 subfunctions. These are: 7.1 Start-up Menu 7.2 Copy Area USB Duplicator 7. Setup OK ESC 7.3 Button Beep 7.4 Asyn Hold Time 7.5 Ignore Size 7.6 Asynchronous Enable/Disable 7.7 Language 7.8 Working Mode Normal/Turbo
Page 33
www.aleratec.com27 Using the USB Duplicator 7.1 Startup Menu Startup Menu allows you to select which function displays first when the USB Duplicator is turned on. This function selects the menu item that will be the first item shown on the display when you turn on the duplicator. The default setting is Copy. 1. Use the UP or DOWN arrow to scroll through the menu until Setup is displayed on the LCD screen. Press OK. 2. Use the UP or Down arrow to scroll through the Setup options until Startup Menu...
Page 34
www.aleratec.com28 Using the USB Duplicator 7.3 Button Beep This setting controls the button sound. 1. Use the UP or DOWN arrow to scroll through the menu until Setup is displayed on the LCD screen. Press the OK. 2. Use the UP or Down arrow to scroll through the Setup options until Button Beep is displayed on the LCD screen. 3. Default setting is ON. Use the UP or DOWN arrows to select either ON or OFF. Press the OK button to change, or ESC to exit. ESC OK 7. Setup: 3. Button Beep ESC OK ...
Page 35
www.aleratec.com29 Using the USB Duplicator 7.4 Asyn Hold Time This function allows you to set the time to exit Asynchronous Copying when you pull all the USB flash drives out of the duplicator. The default setting is 30 seconds. If after 30 seconds no new drives are plugged into the USB Duplicator the LCD will ask to exit Asynchronous or to stay in Asynchronous mode. Press OK to exit Asynchronous Copying or press ESC to keep this status. To change the default setting for Asyn Hold Time use the...
Page 36
www.aleratec.com30 Using the USB Duplicator 7.5 Ignore Size - continued 1. Use the UP or DOWN arrow to scroll through the menu until Setup is displayed on the LCD screen. Press the OK button to select or press ESC to go to the next setting. 2. Use the UP or Down arrow to scroll through the options until Ignore Size is displayed on the LCD screen. Press OK. 3. Default setting is 3% ; press the arrow keys to change and press OK. Note: Source flash drive and blank drives need to be the same capacity...
Page 37
www.aleratec.com31 Using the USB Duplicator 7.6 Asynchronous (Enable/Disable) This function allows the user to enable/disable asynchronous copying. Use Up and Down arrow keys to toggle between and push OK to select, or ESC to exit. 7.7 Language This function selects the language shown on the display (English, Traditional Chinese, Simplified Chinese, and Japanese). To change the default setting for Asyn Hold Time use the following procedure: 1. Use the UP or DOWN arrow to scroll through the menu...
Page 38
www.aleratec.com32 Specifications Operating Type• Stand-alone (No PC Required) Number of Targets• 118 Supported Media• USB Flash/Pen Drive requiring less than 500mA from USB Port Transfer Speed• Up to 33MB/s Copy Mode• Synchronous or Asynchronous LCD Display• 2 x 16 Backlit Power Requirements• 115V or 230V Operating Temperature• 41°F - 122°F Operating Humidity • 15% - 90%
Page 39
www.aleratec.com33 Technical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec Technical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you. Calling Aleratec Technical Support without all the necessary information can be both time consuming and frustrating. Therefore, please try to have the following information ready before calling: 1. Part Number - the part number is located on...