Alcatel OneTouch Sonic LTE User Manual

							99100
Enhance web accessibilityTouch to open a dialog which asks you to install scripts from Google which make their web content more accessible. Touch Allow to confirm.
1153 Developer options
The  Development  screen  contains  settings  that  are  useful  for  developing  Android applications.  For  full  information,  including  documentation  of  the Android  applications  and development tools, see the Android developer web site (http://developer.android.com).
Desktop backup passwordTouch to set/change/remove desktop full backup password.
Stay awakeMark  this  checkbox  to  prevent  the  screen  from  dimming  and  locking  when  the  phone  is connected  to  a  charger  or  to  a  USB  device  that  provides  power.  Don’t  use  this  setting with  a  static  image  on  the  phone  for  long  periods  of  time,  or  the  screen  may  be  marked with that image.
Protect SD cardMark this checkbox to proyect your SD card. 
USB debuggingMark  this  checkbox  to  permit  debugging  tools  on  a  computer  to  communicate  with  your phone via a USB connection.
Allow mock locationsMark  this  checkbox  to  permit  a  development  tool  on  a  computer  to  control  where  the phone  believes  it  is  located,  rather  than  using  the  phone’s  own  internal  tools  for  this purpose.
Select debug appMark this checkbox to select debug application set.
Wait for debuggerMark this checkbox to wait for debugger to attach before executing,
Select time zone Touch to open a dialog where you can set the phone’s time zone.
Use 24-hour format Mark this checkbox to display the time using 24-hour clock format.
Choose date format 
Touch to open a dialog where you can select the format for displaying dates.
1152 Accessibility
You  use  the Accessibility  settings  to  configure  any  accessibility  plug-ins  you  have  installed on your phone.
TalkBackWhen Talkback  is  on,  your  device  provides  spoken  feedback  to  help  blind  and  lowvision users. 
Large textMark this checkbox to enlarge the screen text.
Auto-rotate screenMark  this checkbox to rotate screen automatically.
Speak passwordsMark  this checkbox to speak passwords while you typing.
Text-to-speech settingsTouch to adjust the the prefered engine and speech rate . 
Touch & hold delayTouch  to  adjust  the  duration  of  touch  and  hold  delay. This  function  enables  your  phone  to differ touch and touch & hold, which may avoid incorrect operations. 
						

							101102
Profile GPU renderingTouch to measure rendering time.
Enable tracesTouch to enable traces.
Don't keep activitiesMark this checkbox to clear the activity history.
Background process limitTouch to change the limit for background processes.
Show all ANRsMark  this  checkbox  to  show  "Application  Not  Responding"  dialog  for  background applications.
1154 About phone
This  contains  information  about  things  ranging  from  Legal  information,  Model  number, Firmware version, Baseband version, Kernel version, Build number to those listed below:
Software UpdatesTouch to check for system updates.
Status This  contains  the  status  of  the  Battery  status,  Battery  level,  My  phone  number,  Network, Signal strength, etc.
Legal informationTouch to view legal information.
Show touchesMark this checkbox to show visual feedback for touches.
Pointer locationMark this checkbox to show current touch data.
Show layout boundsMark this checkbox to show clip bounds, margins, etc.
Show GPU view updatesMark this checkbox to show flash views inside windows when drawn with the GPU.
Show surface updatesMark this checkbox to flash relative screen areas when they update.
Window animation scaleTouch to adjust the animation scale for your window.
Transition animation scaleTouch to adjust the animation scale while performing transition.
Animator duration scaleTouch to adjust the animator duration scale for your window.
Disable HW overlaysMark this checkbox to enable GPU for screen compositing.
Force GPU renderingMark this checkbox to use 2D hardware acceleration in applications.
Strict mode enableMark  this  checkbox  to  enable  strict  mode.  After  enabled,  the  screen  will  flash  when applications do long operations on the main thread.
Show CPU usageMark this checkbox to show current CPU usage. 
						

							103104
13 Accessories 
The latest generation of ALCATEL ONE TOUCH mobile phones offers a built-in handsfree feature that allows you to use the telephone from a distance, placed on a table for example. For  those  who  prefer  to  keep  their  conversations  confidential,  an  earpiece  is  also  available known as the headset.1. Quick Guide2. MOU 5V1A Charger3. USB cable
Only use your telephone with the ALCATEL batteries, chargers and accessories in your box.
12  
Making the most of your 
phone 
121 Upgrade 
1211 Mobile Upgrade
Using Mobile Upgrade tool you can update your phone’s software from your computer. Download  Mobile  Upgrade  from ALCATEL  ONETOUCH  website  (www.alcatelonetouch.com)  and  install  it  on  your  conputer.  Launch  the  tool  and  update  your  phone  by  following the step by step instructions (refer to the User Guide provided together with the tool).Your phone’s software will now have the latest software. 
1212 FOTA Upgrade
Using FOTA Upgrade tool you can update your phone's software.To access Firmware Upgrade Manager:•	Touch the Application tab from the Home screen, then touch System updates.•	Touch and hold the Recent app key and Settings\About phone\System updates. Touch Check  for  updates,  the  phone  will  search  for  the  latest  software.  If  you  want  to update the system, please touch the button Download, after it done please touch Install to complete the upgrade. Now your phone's software will have the latest version.You should turn on Wi-Fi before searching for updates. Settings of auto-check intervals and reminder for the upgrade are also available.
If  you  have  chosen  auto-check,  when  the  system  discovers  the  new  version,  the    icon  will  appear  in  the  status  bar. Touch  the  notification  to  access  the Firmware  Upgrade Manager directly.During  FOTA  downloading  or  updating,  to  avoid  errors  in  locating  the  correct update packages, do not change your default storage location. 
						

							105106
14 Safety and use 
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX.DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS CHARGING.YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR ATTEMPT TO DISASSEMBLE THE DEVICE.
Privacy restrictions
Some countries require full disclosure of recorded telephone conversations, and stipulate that you must  inform  the  person  with  whom  you  are  speaking  that  the  conversation  is  being  recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your phone.
Disclaimers
ANY  WEATHER,  STOCK,  OR  OTHER  INFORMATION,  DATA,  OR  DOCUMENTATION (“ACCESSED INFORMATION”) ARE PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OR ANY TECHNICAL SUPPORT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TCT  MOBILE  AND  ITS  AFFILIATES  expressly  disclaim  any  and  all  representations  and warranties,  arising  by  law  or  otherwise,  related  to  the Accessed  Information,  including  without limitation  any  express  or  implied  representation  or  warranty  of  merchantability,  fitness  for  a particular  purpose,  non-infringement,  quality,  accuracy,  completeness,  effectiveness,  reliability, or  usefulness. Without  limiting  the  foregoing,  it  is  further  understood  that TCT  Mobile  and  its Affiliates are not responsible for any use of the Accessed Information or the results arising from such use, and that you use such information at your own risk.
Limitation of damages                                                       
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TCT MOBILE  OR  ITS AFFILIATES  BE  LIABLE TO YOU, ANY  USER,  OR THIRD  PARTY  FOR ANY INDIRECT,  SPECIAL,  CONSEQUENTIAL,  INCIDENTAL  OR  PUNITIVE  DAMAGES  OF ANY KIND, ARISING  IN  CONTRACT, TORT,  OR  OTHERWISE,  INCLUDING,  BUT  NOT  LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS  OF  DATA,  AND/OR  LOSS  OF  PROFITS,  REGARDLESS  OF  THE  FORESEEABILITY THEREOF  OR WHETHER TCT  MOBILE  OR  ITS AFFILIATES  HAVE  BEEN ADVISED  OF THE POSSIBILITY  OF  SUCH  DAMAGES. AND  IN  NO  EVENT  SHALL THE TOTAL  LIABILITY  OF TCT MOBILE OR 
ITS  AFFILIATES  EXCEED  THE  AMOUNT  RECEIVED  FROM  YOU,  REGARDLESS  OF  THE LEGAL THEORY UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS WHICH MAY NOT BE DISCLAIMED.
Important health information and safety precautions   
When  using  this  product,  the  safety  precautions  below  must  be  taken  to  avoid  possible  legal liabilities and damages.Retain  and  follow  all  product  safety  and  operating  instructions.  Observe  all  warnings  in  the operating instructions on the product.To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION:  Connecting  to  improperly  grounded  equipment  can  result  in  an  electric  shock  to your device.This product is equipped with a USB Cable for connecting with desktop or notebook computer. Be  sure  your  computer  is  properly  grounded  (earthed)  before  connecting  this  product  to  the computer.  The  power  supply  cord  of  a  desktop  or  notebook  computer  has  an  equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.
Safety precautions for power supply unit
   Use the correct external power sourceA product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service  provider  or  local  power  company.  For  a  product  that  operates  from  battery  power or  other  sources,  refer  to  the  operating  instructions  that  are  included  with  the  product. This  product  should  be  operated  only  with  the  following  designated  power  supply  unit(s).Travel charger: Input: 100-240 V, 50/60 Hz, 0.15 A               Output: 5 V, 1000 mA   
						

							107108
   Handle battery packs carefullyThis  product  contains  a  Lithium-ion  polymer  or  Lithium-ion  battery. There  is  a  risk  of  fire  and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 140˚F (60˚C) .WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or  burns,  do  not  disassemble,  crush,  puncture,  short  external  contacts,  expose  to temperature  above  140˚F  (60˚C),  or  dispose  of  in  fire  or  water.  Replace  only  with specified  batteries.  Recycle  or  dispose  of  used  batteries  according  to  the  local regulations or reference guide supplied with your product.
          NOTE: This product should be operated only with the following designated Battery Pack(s).Battery: Lithium 2200 mAh (CAB2200000C3)   Take extra precautions•	 Keep  the  battery  or  device  dry  and  away  from  water  or  any  liquid  as  it  may  cause  a short circuit.•	 Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation.•	 The  phone  should  only  be  connected  to  products  that  bear  the  USB-IF  logo  or  have completed the USB-IF compliance program.•	 Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor.•	 Always keep the battery out of the reach of babies and small children, to avoid swallowing of the battery. Consult the doctor immediately if the battery is swallowed.•	 Only use the battery with a charging system that has been qualified with the system per this standard, IEEE-Std-172 5-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard.•	 Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-172 5-2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.•	 Avoid  dropping  the  phone  or  battery.  If  the  phone  or  battery  is  dropped,  especially  on a hard surface, and the user suspects damage, take it to a service centre for inspection.•	If the battery leaks:•  Do not allow the leaking fluid to come in contact with skin or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice.
•  Do  not  allow  the  leaking  fluid  to  come  in  contact  with  eyes.  If  already  in  contact, DO NOT rub; rinse with clean water immediately and seek medical advice.•	Take extra precautions to keep a leaking battery away from fire as there is a danger of ignition or explosion.
Safety precautions for direct sunlightKeep  this  product  away  from  excessive  moisture  and  extreme  temperatures.  Do  not  leave  the product  or  its  battery  inside  a  vehicle  or  in  places  where  the  temperature  may  exceed  140˚F (60˚C), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or  strong  ultraviolet  light  for  extended  periods  of  time. This  may  damage  the  product,  overheat the battery, or pose a risk to the vehicle.
Prevention of hearing lossCAUTION:  Permanent  hearing  loss  may  occur  if  earphones  or  headphones  are  used  at  high volume for prolonged periods of time.
Safety in aircraftDue to the possible interference caused by this product to an aircraft’s navigation system and its communications  network,  using  this  device’s  phone  function  on  board  an  airplane  is  against  the law in most countries. If you want to use this device when on board an aircraft, remember to turn off your phone by switching to Airplane Mode.
Environment restrictionsDo not use this product in gas stations, fuel depots, chemical plants or where blasting operations are  in  progress,  or  in  potentially  explosive  atmospheres  such  as  fuelling  areas,  fuel  storehouses, below  deck  on  boats,  chemical  plants,  fuel  or  chemical  transfer  or  storage  facilities,  and  areas where  the  air  contains  chemicals  or  particles,  such  as  grain,  dust,  or  metal  powders.  Please  be aware  that  sparks  in  such  areas  could  cause  an  explosion  or  fire  resulting  in  bodily  injury  or even death.
Explosive atmospheresWhen in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical  plants,  or  where  blasting  operations  are  in  progress. Areas  with  a  potentially  explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. 
						

							109110
Road safetyFull attention must be given to driving at all times in order to reduce the risk of an accident. Using  a  phone  while  driving  (even  with  a  hands  free  kit)  causes  distraction  and  can  lead  to an  accident. You  must  comply  with  local  laws  and  regulations  restricting  the  use  of  wireless devices while driving.Safety precautions for RF exposure  
  Avoid using your phone near metal structures (for example, the steel frame of a building).  
  Avoid using your phone near strong electromagnetic sources, such as microwave ovens,    sound speakers, TV and radio.     Use  only  original  manufacturer-approved  accessories,  or  accessories  that  do  not  contain any metal.     Use  of  non-original  manufacturer-approved  accessories  may  violate  your  local  RF exposure guidelines and should be avoided.Interference with medical equipment functionsThis product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics.If  you  use  any  other  personal  medical  device,  consult  the  manufacturer  of  your  device  to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you  to  do  so.  Hospitals  or  health  care  facilities  may  be  using  equipment  that  could  be  sensitive to external RF energy.Nonionizing radiation                                Your device has an internal antenna. This product should be operated in its normal-use position to  ensure  the  radiative  performance  and  safety  of  the  interference. As  with  other  mobile  radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.Use  only  the  supplied  integral  antenna.  Use  of  unauthorized  or  modified  antennas  may  impair call  quality  and  damage  the  phone,  causing  loss  of  performance  and  SAR  levels  exceeding  the recommended  limits  as  well  as  result  in  non-compliance  with  local  regulatory  requirements  in your country.To  assure  optimal  phone  performance  and  ensure  human  exposure  to  RF  energy  is  within  the guidelines  set  forth  in  the  relevant  standards,  always  use  your  device  only  in  its  normal-use position. Contact with the antenna area may impair call quality and cause your device to operate at a higher power level than needed. Avoiding contact with the antenna area when the phone is IN USE optimizes the antenna performance and the battery life.
Electrical safety  
  Accessories•	Use only approved accessories.•	Do not connect with incompatible products or accessories.•	Take  care  not  to  touch  or  allow  metal  objects,  such  as  coins  or  key  rings,  to  contact  or short-circuit the battery terminals.  Connection to a car  Seek professional advice when connecting a phone interface to the vehicle electrical     system.     Faulty and damaged products•	Do not attempt to disassemble the phone or its accessory.•	Only qualified personnel must service or repair the phone or its accessory.
General precautionsYou alone are responsible for how you use your phone and any consequences of its use. You must always  switch  off  your  phone  wherever  the  use  of  a  phone  is  prohibited.  Use  of  your  phone  is subject to safety measures designed to protect users and their environment.  
  Avoid applying excessive pressure to the deviceDo not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.  
  Device getting warm after prolonged useWhen  using  your  device  for  prolonged  periods  of  time,  such  as  when  you’re  talking  on  the phone,  charging  the  battery  or  browsing  the Web,  the  device  may  become  warm.  In  most cases,  this  condition  is  normal  and  therefore  should  not  be  interpreted  as  a  problem  with the device.     Heed service markingsExcept  as  explained  elsewhere  in  the  Operating  or  Service  documentation,  do  not  service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider.  
  Protect your phone•	Always  treat  your  phone  and  its  accessories  with  care  and  keep  them  in  a  clean  and  dust-free place.•	Do not expose your phone or its accessories to open flames or lit tobacco products.•	Do not expose your phone or its accessories to liquid, moisture or high humidity. 
						

							111112
•	Do not drop, throw or try to bend your phone or its accessories.•	Do  not  use  harsh  chemicals,  cleaning  solvents,  or  aerosols  to  clean  the  device  or  its accessories.•	Do not paint your phone or its accessories.•	Do not attempt to disassemble your phone or its accessories, only authorised personnel must do so.•	 
Do  not  expose  your  phone  or  its  accessories  to  extreme  temperatures,  above  140°F (60°C).•	Please check local regulations for disposal of electronic products.•	Do not carry your phone in your back pocket as it could break when you sit down.  
  Damage requiring serviceUnplug  the  product  from  the  electrical  outlet  and  refer  servicing  to  an  authorized  service technician or provider under the following conditions:•	 Liquid has been spilled or an object has fallen into the product.•	The product has been exposed to rain or water.•	The product has been dropped or damaged.•	 There are noticeable signs of overheating.•	The product does not operate normally when you follow the operating instructions.      Avoid hot areasThe product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.     Avoid wet areas Never use the product in a wet location.     Avoid using your device after a dramatic change in temperatureWhen  you  move  your  device  between  environments  with  very  different  temperature and/or  humidity  ranges,  condensation  may  form  on  or  within  the  device.  To  avoid damaging  the  device,  allow  sufficient  time  for  the  moisture  to  evaporate  before  using the device.NOTICE:  
When  taking  the  device  from  low-temperature  conditions  into  a  warmer environment or from high-temperature conditions into a cooler environment, allow the device to acclimate to room temperature before turning on power.      Avoid pushing objects into productNever  push  objects  of  any  kind  into  cabinet  slots  or  other  openings  in  the  product. Slots  and  openings  are  provided  for  ventilation. These  openings  must  not  be  blocked or covered.  
   Air bagsDo not place a phone in the area over an air bag or in the air bag deployment area. Store the phone safely before driving your vehicle.
  
  Mounting accessoriesDo  not  use  the  product  on  an  unstable  table,  cart,  stand,  tripod,  or  bracket.  Any mounting  of  the  product  should  follow  the  manufacturer’s  instructions,  and  should  use a mounting accessory recommended by the manufacturer.     Avoid unstable mounting Do not place the product with an unstable base.    Use product with approved equipmentThis  product  should  be  used  only  with  personal  computers  and  options  identifified  as suitable for use with your equipment.   
 Adjust the volumeTurn down the volume before using headphones or other audio devices.  
 CleaningUnplug  the  product  from  the  wall  outlet  before  cleaning.  Do  not  use  liquid  cleaners or  aerosol  cleaners.  Use  a  damp  cloth  for  cleaning,  but  NEVER  use  water  to  clean  the LCD screen.    Small childrenDo not leave your phone and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others, or could accidentally damage the phone. Your phone contains small parts with sharp edges that may cause an injury or which could become detached and create a choking hazard.  
 Repetitive motion injuriesTo minimise the risk of RSI, when Texting or playing games with your phone:•	Do not grip the phone too tightly•	Press the buttons lightly•	Make  use  of  the  special  features  in  the  handset  which  minimize  the  number  of  buttons which have to be pressed, such as message templates and predictive text.•	Take lots of breaks to stretch and relax.    Operating machineryFull  attention  must  be  given  to  operating  the  machinery  in  order  to  reduce  the  risk of an accident.   Loud noiseThis phone is capable of producing loud noises which may damage your hearing.  
  Emergency callsThis phone, like any wireless phone, operates using radio signals, which cannot guarantee connection in all conditions. Therefore, you must never rely solely on any wireless phone for emergency communications. 
						

							113114
Regulatory agency identifications                                    
For regulatory identification purposes, your product is assigned a model number of A851L. To  ensure  continued  reliable  and  safe  operation  of  your  device,  use  only  the  accessories listed below with your A851L device.The Battery Pack has been assigned a model number of CAB2200005C2.Operating temperature range: 32°F to 104°F (0°C to 40°C)NOTE:  
This product is intended for use with a certified Class Limited Power Source, rated 4.35 Volts DC, maximum 1 Amp power supply unit.
Federal Communication Commission Interference Statement
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However, there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct the interference by one of the following measures:   
  Reorient or relocate the receiving antenna.  
  Increase the separation between the equipment and receiver.  
   Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the     receiver is connected.   Consult the dealer or an experienced radio or television technician for help.FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party responsible for compliance could void the user’s authority to operate this equipment.This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important Note 
     
Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.  End  users  must  follow  the  specific  operating  instructions  for  satisfying RF  exposure  compliance.  To  maintain  compliance  with  FCC  RF  exposure  compliance requirements, please follow operation instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the transmitters built-in with the device.
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices
On  July  10,  2003  ,  the  U.S.  Federal  Communications  Commission  (FCC)  Report  and Order  in  WT  Docket  01-  09  modified  the  exception  of  wireless  phones  under  the Hearing  Aid  Compatibility  Act  of  1988  (HAC  Act)  to  require  digital  wireless  phones  be compatible  with  hearing-aids. The  intent  of  the  HAC Act  is  to  ensure  reasonable  access to  telecommunications  services  for  persons  with  hearing  disabilities. While  some  wireless phones  are  used  near  some  hearing  devices  (hearing  aids  and  cochlear  implants),  users may  detect  a  buzzing,  humming,  or  whining  noise.  Some  hearing  devices  are  more  immune than  others  to  this  interference  noise,  and  phones  also  vary  in  the  amount  of  interference they  generate. The  wireless  telephone  industry  has  developed  a  rating  system  for  wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the  user’s  hearing  device  and  hearing  loss.  If  your  hearing  device  happens  to  be  vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely  to  generate  less  interference  to  hearing  devices  than  phones that  are  not  rated.  M4  is  the  better/higher  of  the  two  ratings.   Your device is rated M3.T-Ratings:  Phones  rated T3  or T4  meet  FCC  requirements  and  are likely  to  be  more  usable  with  a  hearing  aid’s  telecoil  than  phones that are not rated. T4 is the better/higher of the two ratings. Your device is rated T3.Please  power  off  the  Bluetooth®  function  while  using  hearing  aid  devices  with  your ALCATEL ONETOUCH A851L.Hearing  devices  may  also  be  rated. Your  hearing  device  manufacturer  or  hearing  health professional  may  help  you  find  this  rating.  Higher  ratings  mean  that  the  hearing  device  is relatively immune to interference noise. 
						

							115116
The  hearing  aid  and  wireless  phone  rating  values  are  then  added  together. A  sum  of  5  is considered acceptable for normal use. A sum of 6 is considered for better use. A sum of 8 is considered  for best use.  In  the above example, if  a hearing  aid  meets  the  M2  level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This should  provide  the  hearing  aid  user  with “normal  usage”  while  using  their  hearing  aid  with the  particular  wireless  phone. “Normal  usage”  in  this  context  is  defined  as  a  signal  quality that is acceptable for normal operation.This  methodology  applies  equally  for T  ratings. The  M  mark  is  intended  to  be  synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The  U  and  UT  marks  are  referenced  in  Section  20.19  of  the  FCC  Rules. The  HAC  rating and  measurement  procedure  are  described  in  the American  National  Standards  Institute (ANSI) C63.19 standard.
For information about hearing aids and digital wireless phonesFCC Hearing Aid Compatibility and Volume Control:http://www.fcc.gov/cgb/dro/hearing.htmlGallaudet University, RERC:https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
SAR Information
0.67 W/kg @ 1g (HEAD)1.23 W/kg @ 1g (BODY)THIS  MODEL  DEVICE  MEETS THE  GOVERNMENT’S  REQUIREMENTS  FOR  EXPOSURE TO  RADIO WAVES.  For  body  worn  operation,  this  phone  has  been  tested  and  meets  the FCC RF exposure guidelines when used with the TCT Mobile Limited. Accessories supplied or  designated  for  this  product.  Use  of  other  accessories  may  not  ensure  compliance  with the FCC RF exposure guidelines.Your  wireless  mobile  phone  is  a  radio  transmitter  and  receiver.  It  is  designed  and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set  by  the  Federal  Communications  Commission  of  the  U.S.  Government. These  limits  are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:    American National Standards Institute (ANSI) IEEE. C95.1-1992 .    National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986.    International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996.
  
   Ministry  of  Health  (Canada),  Safety  Code  6. The  standards  include  a  substantial  safety    margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phone employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg*.The  FCC  has  granted  an  Equipment Authorization  for  this  model  device  with  all  reported SAR  levels  evaluated  as  in  compliance  with  the  FCC  RF  exposure  guidelines.  SAR information  on  this  model  device  is  on  file  with  the  FCC  and  can  be  found  under  the Display  Grant  section  of  https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm  after searching  on  FCC  ID:  RAD361 Additional  information  on  Specific Absorption  Rates  (SAR) can  be  found  on  the  Cellular Telecommunications  &  Internet Association  (CTIA) Web-site as http://www.ctia.org/.* In the U.S. and Canada, the SAR limit for mobile phone used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage.Normal  condition  only  to  ensure  the  radiative  performance  and  safety  of  the  interference. As  with  other  mobile  radio  transmitting  equipment,  users  are  advised  that  for  satisfactory operation  of  the  equipment  and  for  the  safety  of  personnel,  it  is  recommended  that  no part  of  the  human  body  be  allowed  to  come  too  close  to  the  antenna  during  operation of the equipment.
Body-worn Operation
This  device  was  tested  for  typical  body-worn  operations.  To  comply  with  RF  exposure requirements,  a  minimum  separation  distance  of  1  cm  must  be  maintained  between  the user’s  body  and  the  handset,  including  the  antenna.  Third-party  belt-clips,  holsters,  and similar  accessories  used  by  this  device  should  not  contain  any  metallic  components.  Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.Use  only  the  supplied  or  an  approved  antenna.  Unauthorized  antennas,  modifications,  or attachments could impair call quality, damage the phone, or result in violation of regulations. Do  not  use  the  phone  with  a  damaged  antenna.  If  a  damaged  antenna  comes  into  contact with  the  skin,  a  minor  burn  may  result.  Please  contact  your  local  dealer  for  replacement antenna. 
						

							117118
15 Specifications
ProcessorQualcomm® MSM8930
PlatformAndroid™ 4.1
MemoryROM: 4 GBRAM: 1 GB
Dimensions (LxWxT)134 x 69.6 x 10.99mm
WeightAround 158 grams with battery
Display4.63  inch  full  touch  screen  with  FWVGA  dispaly resolution
NetworkGSM: Qual-band 850/900/1800/1900 MHzUMTS: Tril-band 850/1900/2100 MHzLTE :  B4/17 (Band frequency and data speed are operator dependent.) 
GPSAssisted GPS/Internal GPS antenna
Connectivity•	BT4.0 (A2DP/HFP/HSP/OPP)•	Wi-Fi: IEEE 802.11 a/b/g/n•	3.5 mm audio jack•	Micro-USB
Camera•	5.0 megapixel color back camera•	0.3 megapixel color front camera
FCC RF Radiation Exposure Statement
    
This  Transmitter  has  been  demonstrated  co-location  compliance  requirements  with Bluetooth®  and  WLAN.  This  transmitter  must  not  be  co-located  or  operating  in conjunction with any other antenna or transmitter.   
  This  equipment  complies  with  FCC  RF  radiation  exposure  limits  set  forth  for  an    uncontrolled environment.
Telecommunications & Internet Association (TIA) safety information
Pacemakers
The  Health  Industry  Manufacturers  Association  recommends  that  a  minimum  separation of  15  cm  (6  inches)  be  maintained  between  a  handheld  wireless  phone  and  a  pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.Persons with pacemakers:   Should ALWAYS keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is turned ON.   Should not carry the phone in a breast pocket.     Should  use  the  ear  opposite  the  pacemaker  to  minimize  the  potential  for  interference. If you have any reason to suspect that interference is taking place, turn the phone OFF immediately.
Hearing aids
Some  digital  wireless  phones  may  interfere  with  some  hearing  aids.  In  the  event  of  such interference,  you  may  want  to  consult  your  service  provider,  or  call  the  customer  service line to discuss alternatives.
RoHS compliance
This product is in compliance with Directive 002/95/EC of the European Parliament and of the Council of 7 January 2003 , on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.