ALCATEL ONETOUCH PIXI3 10 User Manual

							11
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energ y set by the Federal Communications Commission of the United States.
During SAR testing, this is set to transmit at its highest cer tified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 0 mm. Although the SAR is determined at the highest cer tified power level, the actual SAR level of the device while operating can be well below the maximum value.  This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network.  In general, the closer you are to a wireless base station antenna, the lower the power output .
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR . The SAR limit set by the FCC is 1.6W/k g.
Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest cer tified power level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this model device with all repor ted SAR levels evaluated as in compliance with the FCC RF exposure guidelines.  SAR information on this model device is on file with the FCC and can be found under the Display Grant section of HYPERLINK “http://w w w.fcc.gov/oet /ea/fccid” www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2ACCJB024.
For this device, the highest repor ted SAR value for usage near the body is:
Maximum SAR for this model and conditions under which it was recorded:
8080 (Body worn)1.179 W/kg
SAR compliance for body operation is based on a separation distance of 0 cm between the device and the human body. During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize inter ference on the network, the operating power of  
						

							12
your device is automatically decreased when full power is not needed. The lower the power output of the device, the lower its SAR value.
Body-worn SAR testing has been carried out at a separation distance of 0 cm. To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body.
If you are not using an approved accessor y ensure that whatever product is used is free of any metal and that it positions the device the indicated distance away from the body.
Organizations such as the World Health Organization and the US Food and Drug Administration have sug gested that if people are concerned and want to reduce their exposure they could use a hands-free accessor y to keep the wireless device away from the head or body during use, or reduce the amount of time spent on the device•	LICENCES
microSD Logo is a trademark.
The Bluetooth word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by TCL Communication Ltd. and its affiliates are under license. Other trademarks and trade names are those of their respective owners.
8080 Bluetooth DID D025958
The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance.
Your device uses non-harmonized frequency and is intended for use in all European countries.
The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors in France.
Google, the Google logo, Android, the Android logo, Google Search™, Google Maps™, Gmail™, YouTube, Google Play Store, Google Latitude™ and Hangouts™ are trademarks of Google Inc. 
						

							13
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will show when you long press Google legal in Settings > About Tablet > Legal information) (1).
General information
•	Internet address:	www.alcatelonetouch.com,
  www.alcatelonetouch.ca•	Hotline Number:	 In	 United	 States	please	 call,	(855)	 368-0829	 for	technical	support.	In	Canada	 please	call,	(855)	 844-6058	 for	technical	support.	
On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by e-mail to ask any questions you may have.
An electronic version of this user guide is available in English and other languages according to availability on our server: 
www.alcatelonetouch.com
Your device is a transceiver that operates on Wi-Fi and Bluetooth with 2.4GHz.
Company Address:
Room1910-12A, Tower 3, China HK City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Disclaimer
There may be certain differences between the user manual description and the device’s operation, depending on the software release of your device or specific operator services.
This device may contain materials, including applications and software in executable or source code form, which is submitted by third parties for inclusion in this device (“Third Party Materials”).
(1) It may not be available according to the countries. 
						

							14
All third party materials in this device are provided “as is”, without warranty of any kind, whether express or implied, including the implied warranties of merchantability, fitness for a particular purpose or use/third party application, interoperability with other materials or applications of the purchaser and non-infringement of copyright. The purchaser undertakes that TCL Communication has complied with all quality obligations incumbent upon it as a manufacturer of mobile devices and devices in complying with Intellectual Property rights. TCL Communication will at no stage be responsible for the inability or failure of the Third Party Materials to operate on this device or in interaction with any other devices of the purchaser. To the maximum extent permitted by law, TCL Communication disclaims all liability for any claims, demands, suits or actions, and more specifically – but not limited to – tort law actions, under any theory of liability, arising out of the use, by whatever means, or attempts to use, such Third Party Materials. Moreover, the present Third Party Materials, which are provided free of charge by TCL Communication, may be subject to paid updates and upgrades in the future; TCL Communication waives any responsibility regarding such additional costs, which shall be borne exclusively by the purchaser. The availability of the applications may vary depending on the countries and the operators where the device is used; in no event shall the list of possible applications and software provided with the devices be considered as an undertaking from TCL Communication; it shall remain merely as information for the purchaser. Therefore, TCL Communication shall not be held responsible for the lack of availability of one or more applications wished for by the purchaser, as its availability depends on the country and the operator of the purchaser. TCL Communication reserves the right at any time to add or remove Third Party Materials from its devices without prior notice; in no event shall TCL Communication be held responsible by the purchaser for any consequences that such removal may have on the purchaser regarding the use or attempt to use such applications and Third Party Materials.
Accessory
◆ Charger, 5.0VDC/2.0A
◆ USB cable, 5pins micro-USB 
						

							15
Electronic Recycling
For more information on Electronic Recycling, please:
1)  Visit ALCATEL ONETOUCH Electronic Recycling Program website at http://www.alcatelonetouch.us/Electronic-Recycling-Program-Accessibility-and-Compliance/b/11522543011, or
2)  Call ALCATEL ONETOUCH US Customer Support at 1-855-368-0829.
Warranty
Your device is warranted against any defect or malfunctioning which may occur in conditions of normal use during the warranty period of twelve (12) months (1) from the date of purchase as shown on your original invoice.
Batteries (2) and accessories sold with your device are also warranted against any defect which may occur during the first twelve (12) months (1) from the date of purchase as shown on your original invoice.
In case of any defect of your device which prevents you from normal use thereof, you must immediately inform your vendor and present your device with your proof of purchase.
(1) The warranty period may vary depending on your country.
(2) The life of a rechargeable mobile device battery in terms of conversation time standby time, and total service life, will depend on the conditions of use and network configuration. Batteries being considered expendable supplies, the specifications state that you should obtain optimal performance for your device during the first six months after purchase and for approximately 200 more recharges.
If the defect is confirmed, your device or part thereof will be either replaced or repaired, as appropriate. Repaired device and accessories are entitled to a 30 days warranty for the same defect. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. 
						

							16
This warranty covers the cost of parts and labor but excludes any other costs.
This warranty shall not apply to defects to your device and/or accessory due to (without any limitation):
1) Non-compliance with the instructions for use or installation, or with technical and safety standards applicable in the geographical area where your device is used;
2) Connection to any equipment not supplied or not recommended by TCL Communication Ltd. ;
3) Modification or repair performed by individuals not authorized by TCL Communication Ltd. or its affiliates or your vendor;
4) Modification, adjustment or alteration of software or hardware performed by individuals not authorized by TCL Communication Ltd. ;
5) Inclement weather, lightning, fire, humidity, infiltration of liquids or foods, chemical products, download of files, crash, high voltage,  corrosion, oxidation…
Your device will not be repaired in case labels or serial numbers (IMEI/SN)have been removed or altered.
There are no express warranties, whether written, oral or implied, other than this printed limited warranty or the mandatory warranty provided by your country or jurisdiction.
In no event shall TCL Communication Ltd. or any of its affiliates be liable for indirect, incidental or consequential damages of any nature whatsoever,including but not limited commercial or financial loss or damage,loss of data or loss of image to the full extent those damages can be disclaimed by law.
Some countries/states do not allow the exclusion or limitation of indirect, incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. 
						

							17
1 Your device
1.1 Keys and connectors
NumberDescription
 1Micro-USB connector/Battery charge port
 2Earphone socket
 3Microphone
 4Front camera
 5Power key
 6Volume Up/Down
 7MicroSD card socket
Front panel213
456
7 
						

							18
NumberDescription
 8Rear Camera
 9Speaker
1.2 Getting started
1.2.1 Set-upInserting the microSD card Insert your micro SD card in the right direction to avoid damage. Please refer to the following instructions. 
1234
 
Before inserting/removing the microSD card, you should ensure the tablet is off, to protect it from corruption or damage. In addition, regularly removing or inserting the SD card may cause the tablet to restart.
Rear panel
8
9 
						

							19
Charging the battery
To charge your tablet, connect the charger to your tablet and mains socket.•	When using your tablet for the first time, charge the battery fully (approximately 5 hours).
You are advised to fully charge the battery. Charging status () is indicated by the percentage on screen while the tablet is powered off. The percentage increases as the tablet is charged.
 To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. This device cannot be charged through USB computer connection. Please plug in your charger before first usage.
1.2.2 Power on your tablet
Hold down the Pow e r key until the tablet powers on, unlock your tablet (Slide, PIN, Password, Pattern) if necessary and confirm. The Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your network operator. Do not leave your PIN code with your tablet. Store this information in a safe place when not in use.
Set up your tablet for the first time
The first time you power on the tablet, you should set the following options:•	Slide up and down to select the tablet's language.•	Select a Wi-Fi to connect or touch SKIP to continue .•	Set Date and Time, or you can also choose Automatic time zone, then touch NEXT. 
						

							20
•	Enter your name to personalize some apps on tablet.•	Touch Finish to complete the setup.•	When the tablet is powered on, you can connect to a Wi-Fi network to sign into your Google account and to use some features.
1.2.3 Power off your tablet
Hold down the Pow e r key until the pop-up menu appears, select Power off to confirm.
1.3 Home screen
You can bring all your favorite icons (apps, shortcuts, folders and widgets) to your Home screen for quick access. Touch Home key to switch to Home screen.
Status bar•	Status/Notification indicators. 
Favourite tray applications•	Touch to launch apps.
•	 Touch and hold to move or change 
apps.
Application tab•	Touch to see all applications.The Home screen extends on either side of the screen to allow more space for adding apps, shortcuts etc. Slide the Home screen horizontally left and right to get a complete view of the Home screen. The page indicators above the apps tray indicate which screen you are viewing.