Albrecht AE72H Scanning Receiver Manual

21  · Press Func + Pgm in chain search mode or chain search 
hold mode. The lowest blank channel and bank appear. 
· Press E + Pgm to store the frequency into the blank 
channel. To select another channel, press Func  +  
or Func +before you press E / Pgm. You can also 
press 0-9 to select the bank. 
 
If you try to save a frequency that is already stored, the 
scanner sounds an error tone and displays the channel that 
was duplicated. 
 
· If you entered the frequency by mistake, press ●/Clr.  
· To...

22  · Press Func +  or Func +  . The scanner searches, 
starting from the frequency you entered in the step 
before. 
 
· If you enter a frequency that is out of range, the scanner 
sounds an error tone and Error appears. 
 
· Press Func +  to change the search direction 
downward or Func +  to change the search direction 
upward. Frequencies appear during the search. 
 
Notes: 
· You can set the delay function on or off during the search 
or while the search stops. 
· You can skip a frequency when the...

23  · If you entered the frequency by mistake, press ●/Clr.  
· To enter the frequency anyway, press E to accept. 
 
The scanner moves to program mode after you stored the 
frequency. 
 
Search Skip Memory 
You can skip up to 50 specified frequencies during a search. 
This lets you avoid unwanted frequencies or those already 
stored in a channel. 
 
Note: Search skip frequencies are shared by service search, 
direct entry search, and chain search. If skip frequencies are 
sent in certain mode, the...

24   
· If the scanner is scanning and stops on an active channel 
where you want to store a delay, quickly press Func + 
Dly before it continues scanning again. DLY appears. 
· If the desired channel is not selected, manually select the 
channel, then press Func + Dly. DLY appears. 
· If the scanner is searching, press Func + Dly while the 
scanner is searching. DLY appears and the scanner 
automatically adds a 2-second delay to every frequency it 
stops on in that band.  
· To turn off the 2-second...

25  
Follow these steps to select a different channel in a bank as 
the priority channel. 
 
· Manually select the channel you want to select as the 
priority channel. 
· Press Func + PGM, then press Func + Pri. P appears to 
the left of the selected channel number. 
· Repeat these steps for the channel in each bank you 
want to program as a priority channel. 
 
· To turn on the priority feature, press Func + Pri during 
scanning. PRI appears.  
 
Then the scanner checks the designated priority channel...

26   Problem Possible Cause          Suggestion Check the batteries or make sure 
the AC adapter is connected to 
an AC outlet and the scanner. The 
scanner 
doesn’t 
work. 
 The scanner 
might not get 
any AC/ DC 
power. 
 If there is a wall switch that 
controls power to the AC outlet 
where you connected the AC 
adapter, make sure it is on. Check the antenna connection or 
move or reposition the antenna. Move the scanner. Improper 
reception. The 
scanner’s 
antenna 
might need 
to be 
adjusted. You...

27  Resetting the Scanner 
If the scanners display locks up or stops operating properly, 
you might need to reset the scanner. 
 
Caution: This procedure clears all the information you have 
stored in the scanner. Before you reset the scanner, try 
turning it off and on to see if it begins working properly. Reset 
the scanner only when you are sure it is not working properly. 
After a reset, only the band plan informations and the 
preprogrammed search bands are still memorized in the 
scanner! 
 
To...

28  Repairs 
Do not attempt any repair. The scanner contains no user 
serviceable parts. Contact the ALAN Customer Service 
Center phone (+49) (0)6103 9481 30, send an e-mail to 
[email protected] or take the scanner to a qualified 
and authorized repair technician. 
 
Birdies 
All radios can receive “birdies” (undesired signals). If your 
scanner stops during Scan mode and no sound is heard, it 
might be receiving a birdie. Birdies are internally generated 
signals inherent in the electronics of...

29  Specifications 
 
Channels:...............................................................100 
Banks: ......................................10 (10 channels each)  
Frequency Range (in MHz): 
25.0-27.995 ...........................................Citizens Band 
28.0–69.995 .................. 10 to 6 Meter Amateur Band 
137.0–147.995 .commercial & 2 Meter Amateur Band 
70.0–88.0 .................................... 4 Meter Utility Band 
108.0–136.9875 .................................... Aircraft Band...

30  Features, specifications, and availability of optional 
accessories are all subject to change without notice. 
 
 
 
European 2 years warranty 
The distributor, dealer or retail shop warrants to the original 
retail purchaser of this product that should this product or any 
part of it, under normal use and conditions, be proven 
defective in material or workmanship within 2 years from the 
date of original purchase, such defect(s) will be repaired or 
replaced with new or reconditioned product (at...