Alarm Lock T3e Series New FeatureMultiple OneTimeOnly User Codes User Manual

							NEW FEATURE 
ONE TIME ACCESS FOR 
GROUP 3 USERS 
ADDENDUM 
 
 
 
 
 
 
OVERVIEW 
Your T3e Series lock now includes a new feature named One Time Access for 
Group 3 Users, allowing the creation of multiple one time only User Codes.  
When this feature is activated, an entry by a Group 3 User will allow entry only 
once, then the user will become disabled.  
Note:  When the User Code is entered 
for the first time and access is granted, the Event Log will read Entry followed by 
User Disabled.  If the User Code is entered a second time, access will be denied, 
and the Event Log will read User Denied Access.    TO ACTIVATE VIA THE KEYPAD 
To use this new feature, proceed as follows:  
1.  Enable the Feature.  Enter Program Mode and enter the key  
 
      sequence ;
 6
 7
 ;
 2
 4
 :
  . 
2.  
Assign the selected User Codes to Group 3.  For example, to assign 
User Number 15 to Group 3, press:       ;
 3
 5
 ;
 1
 5
 ;
 3
 :
 
 TO ACTIVATE VIA DL-WINDOWS (V3.03 or later) 
DL-Windows provides a check box on the Features screen (click the Feat button, 
click the 
Options tab, and check One Time Only For Group 3 Users).  
Note:  If 
this option is programmed via the keypad, downloading from versions of DL-
Windows prior to V3.03 will not alter the operation of this feature.  TO DEACTIVATE VIA THE KEYPAD 
As with all ;
 6
 7
 ;
 commands, this feature can be disabled by 
entering the following key sequence: 
        ;
 6
 7
 ;
 0
 0
 0
 :
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
345 Bayview Avenue 
Amityville, New York 11701 
For Sales and Repairs 1-800-ALA-LOCK 
For Technical Service 1-800-645-9440 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 © ALARM LOCK 2004                                                                                         WI1266  2/04
 
NEW FEATURE 
ONE TIME ACCESS FOR 
GROUP 3 USERS 
ADDENDUM 
 
 
 
 
 
 
OVERVIEW 
Your T3e Series lock now includes a new feature named One Time Access for 
Group 3 Users, allowing the creation of multiple one time only User Codes.  
When this feature is activated, an entry by a Group 3 User will allow entry only 
once, then the user will become disabled.  
Note:  When the User Code is entered 
for the first time and access is granted, the Event Log will read Entry followed by 
User Disabled.  If the User Code is entered a second time, access will be denied, 
and the Event Log will read User Denied Access.    TO ACTIVATE VIA THE KEYPAD 
To use this new feature, proceed as follows:  
1.  Enable the Feature.  Enter Program Mode and enter the key  
 
      sequence ;
 6
 7
 ;
 2
 4
 :
  . 
2.  
Assign the selected User Codes to Group 3.  For example, to assign 
User Number 15 to Group 3, press:       ;
 3
 5
 ;
 1
 5
 ;
 3
 :
 
 TO ACTIVATE VIA DL-WINDOWS (V3.03 or later) 
DL-Windows provides a check box on the Features screen (click the Feat button, 
click the 
Options tab, and check One Time Only For Group 3 Users).  
Note:  If 
this option is programmed via the keypad, downloading from versions of DL-
Windows prior to V3.03 will not alter the operation of this feature.  TO DEACTIVATE VIA THE KEYPAD 
As with all ;
 6
 7
 ;
 commands, this feature can be disabled by 
entering the following key sequence: 
        ;
 6
 7
 ;
 0
 0
 0
 :
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
345 Bayview Avenue 
Amityville, New York 11701 
For Sales and Repairs 1-800-ALA-LOCK 
For Technical Service 1-800-645-9440 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 © ALARM LOCK 2004                                                                                        WI1266  2/04