Alarm Lock LEVER CONNECTOR REPLACEMENT KIT User Manual
Have a look at the manual Alarm Lock LEVER CONNECTOR REPLACEMENT KIT User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 84 Alarm Lock manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ADDENDUM LEVER CONNECTOR REPLACEMENT KIT WI1454 8/05 345 Bayview Avenue Amityville, New York 11701 For Sales and Repairs 1-800-ALA-LOCK For Technical Service 1-800-645-9440 Publicly traded on NASDAQ Symbol: NSSC © ALARM LOCK 2005 HOW TO REPLACE THE LEVER CONNECTOR (NEW PART HW572E) 2. Remove the Lever Handle Spring (HW1220) and set aside. 1. With housing removed from door, unscrew two screws and remove the Spring Cover Plate (HW565) as shown. 3. Remove Connector Plate (HW570). 5. Remove and discard Plastic Ring (HW573). 4. Remove Lever Connector (HW572D) and discard. 8. Replace the Spring Cover Plate (HW565) and secure with two screws. APPLICABLE MODELS DL2700 DL3000 PDL3000 DL4100 PDL4100 DL2800 Spring Cover Plate (HW565) Screws (2) Connector Plate (HW570) Lever Connector Old (HW572D) New (HW572E) Outside Housing Lever Handle Spring (HW1220) Spring Cover Plate Lever Connector 6. Install new clear plating Lever Connector (HW572E) in place of old Connector (HW572D). Re- install Connector Plate (HW570). 7. Install Lever Handle Spring (HW1220). Lever Handle Spring Connector Plate Plastic Ring (HW573) Connector Plate (HW570) Replace Lever Connector (HW572D) Lever Handle Spring (HW1220) Use this replacement kit with only those cylindrical locks that meet all three of the following requirements: •Locks manufactured before August 20, 2005; •Locks that contain a Plastic Ring (HW 573--see exploded diagram below); •Locks that exhibit a lever binding problem when installed on doors under 1 3/4 in thickness. (To be removed) Plastic Ring (HW573)