Home > Alarm Lock > Alarm Lock > Alarm Lock DL1300 Programming Manual

Alarm Lock DL1300 Programming Manual

Here you can view all the pages of manual Alarm Lock DL1300 Programming Manual. The Alarm Lock manuals for Alarm Lock are available online for free. You can easily download all the documents as PDF.

Page 21

21 
49. Disable Permanent Passage Mode (This Function enabled through keypad only) 
50. Return Lock to Normal Passage 
Mode Schedule 
(This Function enabled through keypad only) (Locks will lock or unlock depending on the current schedule).  Use Function 50 to undo Functions 48 and/
or 49, and therefore return the lock to all pre-existing scheduled functions. 
•Function 48 allows passage through the door without the need for a User Code.  Re-Lock using Function 49. 
•Programmed Schedules will not...

Page 22

22 
; 5 5 : 
; 5 7 :  57. Print Clock Settings, Software 
Version and Door Number
 
  
55. Print Audit Trail  
; 5 6 :  56. Print User Code List  
; 5 8 : 58. Upload/Download PC Data 
Hold the printer over the locks infrared sensor as shown in Figure 1 and Figure 2 above.  
Twenty (20) events will print at a time; press 1 for more events, or 9 to quit.  To abort 
printing, press any key for 3 seconds (three short beeps will sound). 
Hold the printer over the locks infrared sensor as shown in Figure 1 and...

Page 23

23 
60. Number of Attempts Before Lockout  
61. Set the Attempts Lockout Time 
•Number of attempts before lockout must be 1-9 attempts. 
•The number of attempts is reduced by half every time the keypad is locked out without a 
successful code entry (default is 6 attempts).   
•The attempt count is reset each time a valid code is entered. 
•Lockout Time must be 1-60 seconds. 
How long the keypad is locked-out after a series of unsuccessful attempts 
(default is 18 seconds).  
 4 
 4 
LOCKOUT 
; 6 0      ;...

Page 24

24 
Scheduled Passage and Group 
Use the functions below to enable Passage Mode and enable/disable Groups at the time programmed. 
•For day enter: 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday, 7 for Saturday, 8 for Monday to Friday, 9 for Saturday and Sunday, and 0 for all days of week. 
SCHEDULES 
74. Schedule Enable Group 1 ; 7 4      ; [ _ ]           ; [ _ _ _ _ ] : 
                                         (Day)                                (Time) 
75....

Page 25

25 
QUICK SCHEDULES 
84. Business Quick Schedule 
7AM-5PM, Monday - Friday (This Function enabled through keypad only) 
; 8 4      ; [ _ ] :  
(Group)  
; 8 5      ; [ _ ] :  
(Group)  85. Day Quick Schedule  
7AM-5PM, All days (This Function enabled through keypad only) 
; 8 6      ; [ _ ] :  
(Group)  86. Evening Quick Schedule 
3PM-1AM, All days (This Function enabled through keypad only) 
; 8 7      ; [ _ ] :  
(Group)  87. Night Quick Schedule 
11PM-9AM, All days (This Function enabled through...

Page 26

26 
; 9 9      ; 0 0 0 :  99. Clear All Lock Programming (This Function enabled through keypad only) 
Clears all programming, and returns lock to factory default settings.  Audit Trail contents 
are maintained.  M 
CLEAR ALL PROGRAMMING 
94 - 98. Reserved 
92. Enable Group 4  
(Open Time Window) 
(This Function enabled through keypad only) 
; 9 2      ; [ _ ]           ; [ _ _ _ _ ] : 
                                       (Day)                                      (Time) 
Functions 92 and 93 allow you...

Page 27

27 
Groups and Scheduled Group 1 Examples  
The following examples detail the more advanced features of the DL1300 series locks.  Although all features and device functions can be pro-
grammed using the lock keypad, when programming becomes more complex you may find it easier to use DL-Windows software to program your 
Alarm Lock security lock.  For more information, contact your Alarm Lock security professional. 
 
Assign a User to Two Groups 
Create a User 101 (all Users 101-150 are members of Group 2...

Page 28

28 
Groups and Scheduled Group 1 Examples (contd.) 
Functions 92/93:  Use Function 92 and 93 (see page 26) to create a window of time where if any Group 1 User Code is entered within the 
programmed window, Group 4 Users will be enabled. 
 
1.    Enter Program Mode (if not in already). 
2.    Using Function 2, create User 4 with a User Code of 456789: 
Press ; 2 ; 4 ; 4 5 6 7 8 9 :. 
3.    Because User 4 does not have a default Group association, make User 4 a member of Group 1 using Function 35: 
Press...

Page 29

29 
Function Number(s) Function Name Programming  
43/44 Clock Adjust    
52/53/54 Pass Time          (3 sec) †     10 sec †    15 sec †  
60 Set Lockout Attempts   
61 Set Lockout Time     
69/70 Enter Key Enable †    (Disable) †   
  
+/-    0-55  
 (0) (0) Seconds 
 1-9 Attempts 
(6)  
  1-60 seconds 
(1) (8)  
Default Values are shown in parentheses.  

Page 30

30 
User Number 
(1-2000) User Code  
(3-6 digits)  User Name 
       1 2 3 4  
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
Group  
Association 
  
For a complete list of user...
Start reading Alarm Lock DL1300 Programming Manual

Related Manuals for Alarm Lock DL1300 Programming Manual

All Alarm Lock manuals