Home > AL-KO > Caravan & Motorhome > AL-KO AKS 1300AK 160AK 300 nSecurity Device Instructions User Manual

AL-KO AKS 1300AK 160AK 300 nSecurity Device Instructions User Manual

Add to Favourites
    Download as PDF

    View the AL-KO AKS 1300AK 160AK 300 nSecurity Device Instructions User Manual for free. All the AL-KO manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 OPERATING INSTRUCTIONS FOR AL-KO SECURITY DEVICE FOR AKS 1300 STABILISERS THESE INSTRUCTIONS SHOULD ALSO BE FOLLOWED FOR THE AL-KO SECURITY DEVICES FOR AK 160/300 COUPLINGS INTRODUCTION The AL-KO Security Device (Hitch Lock) helps protect against the following unauthorised operations: 1) Uncoupling from the towing vehicle 2) Coupling onto another towing vehicle 3) Theft of the stabiliser/coupling from the trailer/caravan MAINTENANCE Clean strain bolt, locking bolts and the cutaway portion in the...
    Page 2 OPERATION 1 Insert left and right lugs of safety cover into cutaway portion of the attached locking plates. 2 Push the AL-KO Security Device firmly forward until it can go no further. 3 Hold security device in place, turn key to the right and press the lock cylinder in, until it clicks into place (Fig 3). Turn the key to the left into the locked position. The strain bolt then moves out and locks. 4 Swing the dust cap over the lock cylinder to protect from dirt. OPERATING INSTRUCTIONS FOR AL-KO...
    Page 3 ASSEMBLY INSTRUCTIONS REMOVAL OF EXISTING FIXING BOLTS Before you start to remove the existing fixing bolts, please note the following: On most overrun assemblies, the shock absorber is secured by the fixing bolt (Fig 4/Item 2). WARNING The shock absorber (damper) extends independently. Enclosed with this box is a retaining pin (Fig 5/Item 1) to aid assembly. a Remove gaiter and loosen self-locking nut from hexagon cap bolt (Fig 4/Item 1 and Fig 5/Item 2) c Push or knock out hex. cap bolt (Fig...
    Page 4 With cross-type bolt fixing, do not forget to insert half moon shaped plates (Fig 7/Item 4) and section washer (Fig 7/Item 5). For horizontal bolts, tighten with Allen Key (size 8), as the nuts are fixed and cannot be moved. For vertical bolts, tighten nut and torque as shown in Fig 9. Secure gaiter with tie wrap. Put security device on and lock. If the cover is difficult to put on or lock/unlock then you need to reposition the locking plates. Loosen front bolt and the plates can now move...
    Start reading AL-KO AKS 1300AK 160AK 300 nSecurity Device Instructions User Manual

    Related Manuals for AL-KO AKS 1300AK 160AK 300 nSecurity Device Instructions User Manual

    All AL-KO manuals