Akai Dv R4410ss Operators Manual

							E - 20(continued on next page) (continued on next page)(continued on next page) (continued on next page)
(continued on next page)
Fast Forward/Fast Reverse
1.Press the TUNING  or  TUNING button when a disc is playing.
• The disc begins fast scan at x2 speed.
 Four speeds are available. Each time TUNING 
  or  TUNING
button is pressed, the speed of fast scan changes in the following
sequence:
2.Press the 
 PLAY button when you reach the desired point to resume playback at normal speed.
Slow-motion play
1.Press the SLOW  or  SLOW  button in the play mode.
 Two speeds are available. Each time SLOW 
 or  SLOW button is pressed, the speed of slow-motion
playback changes in the following sequence:
2.Press the 
 PLAY button to return to the normal  playback speed.
Playing a Disc
DV D
Zooming into an image
While a disc is playing, press the ZOOM/TV MODE button.
 While an image is zoomed, you can use 
, ,  and  button to shift the view and display the part you want.
 To return to the normal view, press the ZOOM/TV MODE button until the “ 
off “ symbol shows. The screen will
return to normal.
 When you reach the edge of the image, the display will not shift anymore in that direction.
SKIP (Forward / Reverse)
While you are playing a disc, press the  NEXT button of the remote to move to the beginning of the next chapter
or track. Press the 
 PREV button of the remote to move to the previous chapter or track and automatically start
playing it.
DV D C DVCD
DV D C DVCD
 
						

							E - 21
DV D
Angle selection
Some DVDs contain scenes which have been shot from a
number of different angles. For these discs, the same scene
can be viewed from each of these different angles.
1.While you are playing a DVD with different angles recorded,
press the ANGLE button to view the number of the current
angle.
2.Press the ANGLE button repeatedly to change the scene
to the next angle in those recorded.
 About two seconds later, playback continues from the new
angle you selected.
 If no button is pressed within 10 seconds, playback
continues without changing the current angle.
Sequence of angle shots
(Example)
Notes:
 This function can only be used for discs on which scenes shot from multiple angles have been recorded.
 If only one angle is recorded,  “ 
1/1 ” is displayed.
Playing a Disc
Audio selection
On some discs, the sound is recorded in two or more formats.
Follow the directions below to select the type of playback.
1.While a disc is playing, press the AUDIO button to show
the current audio format number.
2.Press the AUDIO button repeatedly to select the desired
audio format.
Subtitle selection
1.While a DVD is playing, press the SUBTITLE button to
display the current language setting, as shown in the
example below.
2.Press the SUBTITLE button repeatedly to select the desired
subtitle language.
Notes :
 If only one audio format is recorded, the number does not change.
 About two seconds later, playback continues in the new audio format.
Notes :
 If only one language is recorded, the language does not change.
 About two seconds later, playback continues with the new subtitle you selected.
 The number of languages recorded differs depending on the disc.
 If no button is pressed within a few seconds, playback continues without changing the current subtitle.
 This function can only be used for discs on which subtitles have been recorded in multiple languages.
 On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the
main menu.
Recorded audio format number changes sequentially. 
(The maximum number of possible audio  formats is 8)
2/3 Spa
Recorded language changes sequentially. 
(The maximum number of possible subtitles is 8)
2/3 Spa
Recorded language changes sequentially. 
(The maximum number of possible subtitles is 8)
2/3 Spa
Recorded language changes sequentially. 
(The maximum number of possible subtitles is 8)
 
						

							E - 22
Special Functions
DV D
DISPLAY function
Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE.
 While the disc is playing, press the DISPLAY button to display the screen shown below.
Elapsed time: Elapsed time from the beginning of the chapter which is currently playing.
Remaining time: Remaining time of the title which is currently playing.
 Press the DISPLAY button twice to display the screen shown as below.
 Press the ANGLE, AUDIO and SUBTITLE button to change the selected item.
Title skip
 The number of the title currently playing and total titles of disc.
 Press the GOTO button to set your desired title, then press the ENTER button to confirm.
Chapter skip
 The number of the chapter currently playing and total chapters of the currently played title.
 Press the GOTO button to set your desired chapter, then press the ENTER button to confirm.
Time skip
 Elapsed time from the beginning of the currently playing chapter and the remaining time from the beginning of the
currently playing title.
 Press the GOTO button to set your desired point to start playback, then press the ENTER button to confirm.
Angle setting
 The current angle is displayed. When a disc with only one angle is played back, “Angle 1/1” is displayed.
 Press the ANGLE button to select the desired angle.
Audio setting
 The type of audio currently selected is displayed.
 Press the AUDIO button to select your desired type of audio.
Subtitle setting
 The subtitle number and language currently selected is displayed. When a disc with only one subtitle is played
back, “
1/1 Eng” is displayed.
 Press the SUBTITLE button to select your desired language.
GOTO function
This function allows you to skip directly to any part of the disc while a disc is playing.
Elapsed Time Remaining Time
Note :
 After settings, press the DISPLAY button again to return to the normal screen.
Basic playback
(continued on next page) (continued on next page)(continued on next page) (continued on next page)
(continued on next page)
Chapter
Time
Audio setting
Subtitle settingAngle setting
Title
 
						

							E - 23
Locating a specific title
If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.
1. In stop mode, press the GOTO button.
2. Press 
,  or  button to highlight a specific field and press the corresponding number button(s) for the title you
want.
3. Press the ENTER button to confirm. The Unit will star t playback about 3 seconds later.
Note :
 Pressing the CLEAR button resets the title number.
Locating a specific title / chapter / track
If you know the title / chapter / track number you want to play,  you can locate a specifc title / chapter / track by
directly selecting a title / chapter / track number.
1. Press the GOTO button to search your desired title / chapter / track.
2. Press 
,  or  button to highlight a title / chapter / track and press the corresponding number button(s) for the
chapter you want.
3. Press the ENTER button to confirm. The Unit will star t playback about 3 seconds later.
Note :
 Pressing the CLEAR button resets the title / chapter / track number.
DVD
Audio CD
Video CD
(continued on next page) (continued on next page)(continued on next page) (continued on next page)
(continued on next page)
Special Functions
DV D
Basic playback
DV D C DVCD
 
						

							E - 24
Locating a specific time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds)
1. Press the GOTO button.
2. Press 
 or  button to highlight time.
3. Press the corresponding number buttons for the setting point you want.
 The first two numbers you entered represent hours.
 The second two numbers you entered represent minutes.
 The third two numbers you entered represent seconds.
4. Press the ENTER button to confirm. The Unit will star t playback about 3 seconds later.
Notes :
 Some discs may not respond to this process.
 Some scenes may not be located as precisely as you specified.
 This method for accessing specific locations is available only within the current title of the DVD disc.
 You can move through the menu by pressing the 
 and  buttons.
 Pressing the CLEAR button resets the time.
Angle setting
1. Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many angles are
recorded on the disc.
2. Press the ANGLE button repeatedly to select your desired angle.
3. The Unit will change to your desired angle about 3 seconds later.
Audio setting
1. Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many audio formats
are recorded on the disc.
2. Press the AUDIO button repeatedly to select your desired type of
audio.
3. The Unit will change to your desired type audio about 3 seconds
later.
Subtitle setting
1. Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many subtitle
formats are recorded on the disc.
2. Press the SUBTITLE button repeatedly to select your desired
language.
3. The Unit will change to your desired language about 3 seconds
later.
DV D
DV D
Special FunctionsBasic playback
DV D
DV D
Audio CD
Video CD
DV D C DVCD
DVD                             00:09:29     01:25: 27
Title  1/10     Chapter   3/15         Angle 1/3
Audio
Subtitle
2/3 Spa
BitRate 7.1 Mbps
 
						

							E - 25
Programmable memory
The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed
playback.
Title / Chapter programmed playback
1. Press the MEMORY button while the disc is stopped.
2. Enter the title numbers in 
- -. Use  or  button to move the highlight to chapter and enter the chapter numbers
in 
- -.
3. Use 
, ,  or  button to move to the other field.
4. Repeat steps 2 to 3.
5. Press the 
 PLAY button to start the programmed playback.
Notes :
 If you press the STOP 
 button, the programmed selections will be cleared.
 If you press the CLEAR button while you are entering a title or chapter, the currently entered numbers will be
erased and you can reset the numbers again.
3. Use 
, ,  or  button to other field.
4. Repeat steps 2 to 3.
5. Press the 
 PLAY button to start the programmed playback.
Notes :
 If you press the CLEAR button while you are entering a track, the currently entered numbers are erased and you
can reset the numbers again.
 When the unit is playing at program memory mode, the “MEMORY” will display on display window.
Track
CD / DVD programmable memoryAdvanced
playback
Title Chapter
Programmable memory
Track programmed playback
1. Press the MEMORY button while the disc is stopped.
2. Enter the track numbers in 
- -  -.
CD
DV D
 
						

							E - 26
You can play a specific title or chapter repeatedly.
(Title repeat, chapter repeat, A-B repeat)
Repeating a title
You can play the same title repeatedly.
1. While the disc is playing, press the REPEAT DISC button until the “
Repeat Title”
indicator displays on the screen. The current title is played repeatedly.
Repeating a chapter
You can play the same chapter repeatedly.
2. While the disc is playing, press the REPEAT DISC button until the
“
Repeat Chapter” indicator displays on the screen. The current chapter is played
repeatedly.
To resume normal playback
3. While the disc is playing, press the REPEAT DISC button until the “Off”
indicator displays on the screen.
DV D
Repeat PlaybackAdvanced
playback
You can play a single track and whole disc repeatedly.
Repeating a single track
You can play the same track repeatedly.
1. While the disc is playing, press the REPEAT DISC button until the
“
Repeat Single” indicator displays on the screen. The current track is played
repeatedly.
Repeating a whole disc
2. While the disc is playing, press the REPEAT DISC button until the “Repeat All”
indicator displays on the screen. The whole disc is played repeatedly.
To resume normal playback
3. Press the REPEAT DISC button until the “Off” indicator displays on the
screen.
CD
DV DRepeating a specific section
You can play a specific section repeatedly.
1. While the disc is playing, press the REPEAT A-B button at the beginning of
the section (
Rep A -) is displayed you want to play repeatedly.
2. Press the REPEAT A-B button again at the end of the section (
Rep A  - B) is
displayed.
3. The Unit will immediately begin replaying your selection.
To resume normal playback
4. While the disc is playing, press the REPEAT A-B button until the “Off”
indicator displays on the screen.
Notes :
 A-B repeat can only be used within the same title. If the start and end of the section to be repeated are in different titles,
A-B repeat is cancelled.
 The A-B repeat function does not operate in scenes where different camera angles are recorded.
 
						

							E - 27
This Unit will play MP3 and Picture files recorded on CD-R disc.
Playing a MP3 file disc
1. Press the OPEN /CLOSE button, the disc tray opens.
2.
 Insert a MP3 file disc on the disc tray with the label side up.
3.
 Press the OPEN/CLOSE button, the disc tray closes.
4.
 The Unit will take a short while to load the disc and
automatically begin playback.
To pause playback
•Press the  PAUSE button. To resume playback again, press the PLAY button.
To stop playback
Press the  STOP button.
To skip to the next or previous file
Press the  NEXT button on the remote control briefly while playing, to skip ahead to the beginning of
the next file. Each time you press the button consecutively, the beginning of the next file is located and
played back.
Press the  PREV button on the remote control briefly while playing, to skip back to the beginning of the
previous file. Each time you press the button consecutively,the beginning of the previous files is located
and played back.
You also can press the GOTO button, set the track number you want and then press the ENTER button.
Note:
• You can not play in Fast reverse or Fast forward during MP3 playback.
On-screen display
Turn on your TV to view the on-screen display of MP3 files.
 Press the 
, ,  or  CURSOR button on the remote control to select the file you want to listen to,  then
press ENTER button and this selected file is located and played back.
Notes:
The ability of this Unit to read MP3 discs is dependent on the following:
The Bit Rate must be within 64 - 256 kbps.
The total number of files on the disc should not exceed 254.
The maximum number of directories should not exceed 32.
The maximum depth level of directories should not exceed 4.
File names should be named using 12 or fewer letters and/or numbers, and must incorporate the “MP3” file
extension. EXAMPLE: ********.MP3 where each * is a letter or number.
Use only letters and / or numbers in file names. If you use special characters, the file and/or folder names
may not be displayed correctly on the on-screen display.
When recording on CD-R discs, use 74-minute (650MB) discs.
The CD-R disc should be “finalized” in computer by “single session format”.
See your CD/MP3 creation software for details.
PLAYING MP3 AND PICTURE FILE DISC
(continued to next page) (continued to next page)(continued to next page) (continued to next page)
(continued to next page)
 
						

							E - 28
PLAYING MP3 AND PICTURE FILE DISC
Playing a Picture file disc
1. Press the OPEN/CLOSE button, the disc tray opens.
2.
 Insert a Picture CD on the disc tray with the label side up.
3.
 Press the OPEN/CLOSE button, the disc tray closes.
4.
 The unit will take a short while to load the disc.
5. Press the 
PLAY button. The next picture will automatically display after 6 seconds.
Notes:
 If you press the MENU button on the remote control in full-screen review, the Unit will display a menu of 9
thumbnail images.
 Use the cursor to highlight the 
PREV or NEXT in thumbnail screen and then press ENTER to
review other images.  If you want to review one image in full-screen, you can use the  CURSOR 
, ,or
 buttons to highlight the image and then press the ENTER button to confirm.  The image you selected will
show on TV in Full-Screen and automatically display one by one again in about 6 seconds intervals.
 You can press the PAUSE button to interrupt playback, and press the 
PLAY button to resume playback.
 You also can use GOTO function or use the numbered buttons to enter the number to quickly select any
image.
 You can press the ZOOM button to enlarge the picture in 3 levels.
 Press the ANGLE button on the remote control to rotate the picture orientation by 90°. Full-Screen
ReviewThumbnail
Review
Playing a MP3/Picture file disc
1. Press the OPEN/CLOSE button, the disc tray opens.
2.
 Insert a MP3 files/Picture CD on the disc tray with the label side up.
3.
 Press the OPEN/CLOSE button, the disc tray closes.
4.
 The unit will take a short while to load the disc.
5. Use 
, , or  button to select MP3 or Picture CD, then press the
ENTER button.
Notes:
 The SETUP button does not work during MP3 or Picture Disc playback or stop.
 
						

							E - 29
LANGUAGE setting
1. Press the FUNCTION button until DVD appears on the display.
2. Press the STOP button so that no disc is playing.
3. Press the SETUP button.
4. Use 
 or  button to select the Language, then press the ENTER button.
5. Use 
 or  button to English, then press the ENTER button. The screen will change to English Wordings
immediately.
6. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
CUSTOMIZING THE FUNCTION SETTINGS
(continued on next page) (continued on next page)(continued on next page) (continued on next page)
(continued on next page)
VIDEO setting
TV Shape
1. Press the SETUP button.
2. Use 
 or  button to select Video, then press the ENTER button.
3. Use 
 or  button to select TV Shape, then press the ENTER button.
4. Use 
 or  button to shift and select the TV type, then press the ENTER button.
5. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.