Aka Signum MFT 7272M version 100c User Manual
Here you can view all the pages of manual Aka Signum MFT 7272M version 100c User Manual. The AKA manuals for Metal Detector are available online for free. You can easily download all the documents as PDF.
Page 1
Discriminating Metal Detector
Signum MFT
7272М
Attention!
Please read
this manual
thoroughly.
Instruction Manual
Page 2
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. 2 ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected]
Page 3
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] 3 Contents GENERAL INFORMATION--------------------------------------------------------------------------------------------------4 GENERAL DESCRIPTION OF THE DEVICE---------------------------------------------------------------------------4 PACKAGE...
Page 4
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. 4 ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] GENERAL INFORMATION Metal detector SIGNUM MFT 7272M is designed to search for and identify metal objects in the dielectric (dry sand, wood, etc.) and low conducting media (soil, brick walls, etc.). Some applications of use are: • Criminal; • Engineering; • Housing and community services, construction and fire-fighters to search...
Page 5
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] 5 Each channel has an independent adjustment of its sensitivity. The sensitivity of the RT and the sensitivity of ST. The RT channel has a higher sensitivity than the ST channel and its main objective is to locate the object and alert the operator that there is something there....
Page 6
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. 6 ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] GETTING STARTED Assemble the metal detector. To do this: install the appliance in a metal bar; tighten the Collet Chuck; install the inner (plastic rod) sensor; install the rod with the sensor in a metal bar to desired length, using the tabs and holes in the rod tightly and evenly wrap the sensor...
Page 7
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] 7 CONTROLS AND CONNECTIONS Appearance of the device is shown in Figure 2. Sensor (coil) Electronic unit Grip Armrest Telescopic shaft Socket for headphones Battery compartment Fig. 2 On the rear panel of the device are the coil connector, on/off switch and the serial number of the device (fig. 3)....
Page 8
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. 8 ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] Fig. 4 Sets the sensitivity of the ST (short tone) channel Sets the sensitivity of the threshold RT channel (Real Time) Sets the volume of the audio Select the Discrimination edit mode Switch between all metals/discrimination Navigate through the menu and change the...
Page 9
ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] 9 Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. DISPLAY SCREEN In search mode the display device displays the Hodograph information of detected objects and information about the current operation modes (Fig. 5). VDI Number Signal level Battery charge level T-Turbo mode is enabled (see page 14) Number of the current user program 1-4 (see page 14) A-enabled auto...
Page 10
10 ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru [email protected] Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации. To change any of these settings press the appropriate button. The value of the selected option is highlighted on the screen with a rectangle around the appropriate value. Press the button Fig. 6 Or to set the required value. In order to exit the parameters simply click the button...