AITech ProPCTV Wireless User Manual

							 10Interference in the Image and Sound 
• 
The ProPC/TV Wireless can transmit on four different channels. Try all four channels (set on Transmitter and Receiver) to find the cleanest, most 
interference-free channel in your area. 
• 
Move your Transmitter and Receiver slightly to find the best reception position. Sometimes just moving them an inch or two will make a big difference in 
reception quality. 
• 
Shorten the distance between your sender and receiver. 
• 
Microwave ovens, wireless home networking equipment and 2.4 GHz cordless phones all operate on the same frequency as the ProPC/TV Wireless, and may 
cause interference. Try turning them off to eliminate interference. 
• 
Make sure your Transmitter and Receiver are on the same channel. 
• 
Picture on TV is too bright: If you are not connecting a PC monitor to the T-shaped VGA Bypass Cable, terminate the connection by attaching the 75 Ohm Load 
Terminator to the Pass-Thru connector.   
 6. Specifications  Transmitter 
 VIDEO Input Level：  1Vp-p, supports PAL and NTSC format 
AUDIO Input Level：       1Vp-p, stereo  
Antenna：                 Dipole 
Operating Temperature：     -10° to +60° 
VIDEO Output Formant：    PAL and NTSC format 
2.4GHz wireless transmission：
Frequency: 2400MHz - 2483MHz 
Transmission Power: 10dBm 
Channel Number: 4 (2414, 2432, 2450, 2468MHz） 
Frequency Stability:   +-100KHz  
Receiver  
VIDEO Output Level：       1Vp-p 
AUDIO Output Level：       1Vp-p, Stereo 
Antenna：                  Dipole 
2.4GHz Wireless Transmission：
Frequency 2400MHz—2483MHz
 
Receiver Sensitivity   -85dBm 
Channel Number: 4（2414，2432，2450，2468MHz） 
Frequency Stability:  +-100KHz 
 
Warranties  
						

							 11This appendix documents the product warranty applicable to the United States only, as well as information about FCC radio frequency interference. For warranty information outside of the United States, please contact your local distributor.   Limited Warranty
 
This AITech product is warranted to be free from failures due to defects in material and workmanship for one year from the date of original purchase as evidenced by a copy of the original purchase receipt. During the warranty period, AITech, at AITechs sole discretion, will repair or replace at no charge, the product which, in its opinion, is defective.   A Return Merchandise Authorization (RMA) number must be obtained from AITech prior to returning any merchandise for repair or replacement.  Merchandise sent to AITech without an RMA will be returned unopened. The original purchaser is responsible for packing the product for shipment and for the charges to ship the failed product to AITech. AITech is responsible for charges to ship the repaired or replaced product. If any charge to you is involved, the replacement product will be shipped C.O.D. If the failed product has been modified in any way without the consent of AITech or if the failure is the result of misuse, abuse, or misapplication, AITech has no obligation to repair or replace the failed product. EXCEPT AS EXPRESSLY PROVIDED ABOVE, THE PRODUCT AND ACCOMPANYING WRITTEN MATERIALS (INCLUDING THE USERS GUIDE) ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AITECH SPECIFICALLY DOES NOT WARRANT THE OPERATION OF THE PRODUCT AND WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT EVEN IF AITECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE, SO THE ABOVE LIMITATION MAY NOT APPLY. FCC Radio Frequency Interference Statement
 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and then on again, you are encouraged to try to correct the interference by one or more of the following measures:  
						

							 12• 
Reorient or relocate the receiving antenna 
• 
Increase the separation between the equipment and the receiver 
• 
Connect the equipment into an outlet on a circuit different from the circuit to which the receiver is connected 
• 
Consult the dealer or an experienced radio/TV technician for help 
Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in writing by AITECH may void the users authority to operate this equipment.  
       
AITech International 
1288 Kifer Road, Suite 203 
Sunnyvale, CA 94086 
1-408-991-9699 
[email protected] 
www.AITech.com