AITech ProPCTV Wireless Mini User Manual
Here you can view all the pages of manual AITech ProPCTV Wireless Mini User Manual. The AITech manuals for Wireless are available online for free. You can easily download all the documents as PDF.
Page 1
AITech
ProPC/TV Wireless Mini
USER’S MANUAL
Page 2
I FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide...
Page 3
Table of Contents
II
Chapter 1. Overview …………………………………………..................... 1
1.1 : Introduction …………………………………………………… ………….
1
1.2 : Features …………………………………………………………………..
1
1.3 : Specifications...
Page 4
Chapter 1. Overview
1
1.1 Introduction
AITech’s ProPC/TV Wireless Mini accepts computer signal and convert
them into composite video format. With building in 2.4GHz wireless video
transmission technology, you can transmit comp uter VGA signal to TV
simply via wireless. Its purely hardware desig n and multi-system support
gives you the best solution for portable applicatio n! It supports VGA mode
up to 2048x1536 high resolutions!
ProPC/TV...
Page 5
Chapter 1. Overview
2
1.3 Specifications
- Transmitter
- Input: VGA signal (from computer);
Stereo audio jack (from computer);
RCA video/audio jack (Yellow/Red/White)
- Output: Computer monitor pass-thru;
2.4GHz wireless signal...
Page 6
Chapter 2. Outline Description 3 Please refer to the figure as below for the outline of ProPC/TV Wireless Mini Transmitter Receiver
Page 7
Chapter 2. Outline Description
4
Transmitter
1. PAL/NTSC :
TV system select
2. Monitor :
Connect to PC monitor
3. VGA in :
VGA signal from PC
4. Line in :
Audio from PC
5. DC 5V:
power in
6. A-IN :...
Page 8
Chapter 3. Installation
5
NOTE: Make sure “PCTVsender
”, Computer and TV are all power off
before installation
3.1 Transmitter connection:
3.1.1 Connect Antenna to “ANT” of Transmitter
3.1.2 Steps for VGA to TV function as below
1. Properly connect the 15-pin HD extension VGA cable between VGA
port (Computer) and “ VGA IN” (PCTVsender) input port.
2. Connect PC...
Page 9
Chapter 3. Installation
6
After connection
3.3 Push the “ON/OFF” power button. (ProPC/TV Wireless Mini transmitter
and receiver) to “ON” status.
3.4 Set the channel by pressing the select button on th e top of the transmitter
and...
Page 10
![Page 10
Chapter 4. Function Description
7
Note : The following adjustments is for VGA to TV mode settings
only.
4.1 Horizontal/Vertical position :
Press [
/
] to adjust TV vertical position.
Press [⊳
⊳⊳
⊳
/
] to adjust TV horizontal position.
4.2 There are 9 functions in OSD menu, which are:
HSIZE
VSIZE...](http://img.usermanuals.tech/thumb/265/4644/w300_propctv-wireless-mini-1478703601_d-9.png "Page 10
Chapter 4. Function Description
7
Note : The following adjustments is for VGA to TV mode settings
only.
4.1 Horizontal/Vertical position :
Press [
/
] to adjust TV vertical position.
Press [⊳
⊳⊳
⊳
/
] to adjust TV horizontal position.
4.2 There are 9 functions in OSD menu, which are:
HSIZE
VSIZE...")
Chapter 4. Function Description
7
Note : The following adjustments is for VGA to TV mode settings
only.
4.1 Horizontal/Vertical position :
Press [
/
] to adjust TV vertical position.
Press [⊳
⊳⊳
⊳
/
] to adjust TV horizontal position.
4.2 There are 9 functions in OSD menu, which are:
HSIZE
VSIZE...