AITech ProAV Media Extender Wireless HDMI User Manual

 
 
 
0 
Read Quick Guide and User Manual first for quick tips 
that make using your AITech product more enjoyable.  
ProA/V Media Extender 
Wireless HDMI 
AITech 
  
        

 
 
 
1 
  
Table of Contents 
TABLE OF CONTENTS................................................... ......................................................... 1 
1. IMPORTANT INFORMATION................................................... .......................................... 2 
SAFETY PRECAUTIONS............................................................................................................ 2 
       DANGER: BE CAREFUL WITH ELECTRICITY.......................................................

 
 
 
2 
1. Important Information   
Please take the time to read this user manual  
before using the TRANSMITTER and RECEIVER.     
It contains important information about  
operating your Full HD video wireless kit.     
Our company limited warranty applies when the  
product is handled properly for intended use, in  
accordance with its operating instruction. 
However, the warranty may be void in the  
following cases:      Repair, product modification or alteration 
have been performed by...

 
 
 
3 
                                                       
                                  
Special Notice   

  Never use this product nearby an aircraft 
or medical facility.    It can cause  
interference or undesirable effect on the 
operation result.   
   Use of this product in the following 
locations may result in abnormal video  
and audio output (noise, blocked image...  
etc,).   
   Product installed in the walls made  
of concrete. 
   Product situated near the 
refrigerator or metal...

 
 
 
4 
CAUTION of RF module on US  
region 
   
   Any changes or modifications not 
expressly approved by the grantee of this  
device could void the user's authority to  
operate the equipment. 
   This equipment must be installed and 
operated in accordance with provided 
instructions and the antenna(s) used for  
this transmitter must be installed to  
provide a separation distance of at least  
20 cm from all persons and must not be 
co-located or operating in conjunction  
with any other...

 
 
 
5 
CAUTION of System on US region 
   Any changes or modifications not 
expressly approved by the grantee of this  
device could void the user's authority to  
operate the equipment. 
   This equipment must be installed and 
operated in accordance with provided 
instructions and the antenna(s) used for  
this transmitter must be installed to  
provide a separation distance of at least  
20 cm from all persons and must not be 
co-located or operating in conjunction  
with any other antenna or...

 
 
 
6 
2. Introduction 
  
ProA/V Media Extender W ireless HDMI  
audio/video transmission solution allows users 
to place their HDTV set or projector where you  
want, free of the constraint of cables.    Just  
connect your HDTV to the RECEIVER with an 
HDMI cable, and connect your AV equipment  
(Blu-ray players, HD set-up boxes, game consoles  
or HD media players and streamers) to the 
TRANSMITTER.    Besides HDTVs, any display  
with an HDMI input, such as LCD and plasma  
monitors, are...

 
 
 
7 
2.2 Overview    
A.  TRANSMITTER: Full HD Transmitter  
       Front Panel Buttons and LEDs
 
    Power Button with LED Indicator  
Press to turn the transmitter on and off. The 
indicator in the power button is lit solid blue 
when the power is on, and turns red in standby  
mode.   



 Source Selection Button 
Press to switch between the various inputs of 
the transmitter. The one of two LED indicators 
next to this button is lit solid blue to show  
current input you switch. Press this...

 
 
 
8 
  
B.  RECEIVER: Full HD Receiver 
         Front Panel Buttons and LEDs
 
    Power Button with LED indicator  
Press to turn the receiver on and off.    The  
indicator in the power button lights up in blue  
when the power is on, and turns red in  
standby mode.       


 Source Selection Button  
Press this button repeatedly until you see the 
desired video transmitted to your TV set.      
 Main Unit Back Panel
 
    IR Sensor Extender Jack 
Plug the IR Sensor Extender cable into the IR IN...

 
 
 
9 
C.  Remote Controller Unit (RCU) Instruction 
   
                                                         
Note :    
1.  Press Power key to transmitter, 
transmitter will enter Listen mode and  
Loop-thru. display always on. Press Power  
key to receiver, both transmitter and 
receiver will enter Standby mode and  
Loop-thru. display off.     
  2.
  The “Standby” mode uses consumes 90% 
less of the power. User have to press both  
power key on transmitter and receiver to 
resume. 
 
3....