AITech External Scan Converters MaxView Presenter User Manual

                         
                        
 
 
 
MaxView
 
Quick Install Guide
 
   
  
INSTALLATION
 
 
 Step 1 - Turn off your computer.  Disconnect your monitor’s VGA cable from the 
VGA card on the back of your computer.   
 
Step 2 – Connect the MaxView’s VGA cable to VGA card on the back of your 
computer.   
 
Step 3 – (Optional) Connect your computer monitor to the VGA-Out connector on 
the MaxView.  If you are connecting to a laptop, you may not have a monitor to 
connect in this step....

                         
                         
 
CONNECTOR TYPES
 
  S-Video or S-VHS  (Best)  This is a 4-pin DIN connector.  The S-Video 
signal will give you the best TV image.  It is not 
found on all TVs or VCRs.  Use this cable if 
you have the connection available on your video 
device.  The S-Video connection provides the 
highest quality signal. RCA / Composite  (Good)  This connector carries the composite video 
signal.  If your TV does not have direct video 
inputs, you will have to...

                         
                        The graphic below shows how to set the font for the different areas of Windows.   
The example shows how to change the size of the Desktop Icon font: 
 
 Select Icon from the Item pull-down list.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 The graphic on the next page shows you how to change the size of the font.  Select 
the size you think will work and click the Apply button.  If this setting is not 
suitable for your needs, choose one higher or...

                         
                          Connections:    • Check the power connection to the scan converter. 
• Check the connections from the scan converter to the PC.  
• Check the connections from the scan converter to the TV.  TV (or VCR):    • RCA connections to a TV or VCR must be to the Video Input (yellow)  
        connector. 
• If you are connected directly to a TV with a S-Video or RCA cable, ensure 
that the TV has been configured to accept auxiliary video input. 
• If you are...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
 
 
 
 
 
For IBM Compatibles - All Windows Versions 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
2 © 2007 AITech International Corporation.  All rights reserved. 
 
Information in this document is subject to change without notice.  No part of this document may be 
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying 
and recording, for any purpose without the prior written permission of AITech International Corporation. 
 
MaxView is a trademark of AITech International Corporation.   
Pentium is a trademark of Intel Corporation.   
IBM is a...

 
3
 
Introduction 
 
Welcome to the world of the MaxView.  This multimedia product is a convenient tool for business 
conferences, classroom presentations, multimedia demonstrations and home entertainment.  It is capable of 
displaying your computer images onto the television, or any video product such as a VCR or camcorder. 
 
Product Features 
 
MaxView offers the following features: 
 
• External VGA-to-TV digital scan converter 
• Superior image quality with resolutions up to 1024x768.  Wider...

 
4
Installing the MaxView 
 
The MaxView is totally plug-and play.  Installation is simple and straightforward.  There is no need to 
install any device driver.  Just follow these steps: 
 
1. Turn off your computer.   
2. Disconnect your monitor’s VGA cable from the VGA port on the rear of the computer.   
3. Connect the MaxView’s 15-pin VGA connector to the VGA port where the monitor was connected.  
(You may choose to connect the PC monitor to the VGA pass-thru
 port on the MaxView for 
simultaneous...

 
5  
 
Help! I Can’t See Anything On My TV! 
 
If you are having difficulty seeing your computer display on the TV, check the following: 
 
 
Connections:    
• Check the power connection to the MaxView. 
• Check the connections from the MaxView to the PC.  
• Check the connections from the MaxView to the TV. 
 
 
TV (or VCR):    
• RCA connections to a TV or VCR must be to the Video Input (yellow) connector. 
• If you are connected directly to a TV, ensure that the TV has been configured to accept...

 
6
 
 
Warranty Information 
 
• If it becomes necessary to forward the MaxView for repair or modification, you must first obtain a 
Return Authorization Number (RA) from AITech.  Any product sent to AITech without an RA will be 
returned to the sender.  Call or e-mail Technical Support to obtain a RA number. 
• Outside the United States: Please contact your local distributor. 
 
Please ensure your product is adequately cushioned to prevent damage during shipping.  Please include all 
hardware and...