Airpura Air Purifier T 600 User Manual

							Replace the 
4 screws and 
tighten
Turn the 
Airpura
back onto 
its casters
Replace the 
gasket
To close the filter chamber
Position the 
indentation
in the cover
into the center of
the HepaBarrier

Operating 
& Filter Replacement 
Directions

Thank You for choosing an 
Airpura High Efficiency Air Purifier
To bring you the benefits of clean indoor air 

To Begin Using Your Airpura...

Inspect the exterior of your Airpura to verify there is no 
damage from shipping. If any damage is noted please 
follow the instructions in the Airpura returns policy.
Wipe the unit with a damp cloth to remove any dust from 
packaging
Plug the unit into a regular grounded 110 volt outlet
Turn on the unit to MAX and allow it to run for a few minutes
Set the variable speed control to the level you wish
The most efficient way to use your Airpura for regular air 
quality maintenance is to run it at a low speed 24 hours a 
day 7 days a week

Feel the difference breathing clean air makes
 to your health

T600
Airpura Limited Warranty
5 years on parts and 10 years labor
See www.airpura.com for details 
						

							 

To vacuum the TarBarrier




Filter Maintenance and Replacement 


The HEPA-Barrier
 

 
 

The Activated Carbon Filter



Can be vacuumed from the exterior of the unit
once a month or more often.
Should be replaced between 1 to 3 months of use



Should be replaced at least every 12 months of normal 
use 

 
Remove the 
4 retaining 
screws


Take off 
the cover

     
Let the spiral open to fill the opening
Open the top of the spiral to make a slight funnel
Insert the carbon canister into the funnel and hold it straight
Let the canister slidedown the filter slider
Pull the filter slider upout of the cavity using both hands and let the canister slide to the bottom of the cavity
Remove the filterslider and fold it for further use 

Place a felt gasketat the bottom of the filter chamber
Position the pTarBarrierinside the filter chamber