Airpura Air Purifier CDLX 600 User Manual

							Turn the 
Airpura
back onto 
its casters

    


 
 
  
 
  
						

							
 



To vacuum the pre-filter




Filter Maintenance and Replacement 


The HEPA-Barrier
 


 
Use the brush attachment on your vacuum cleaner
Vacuum slowly around the mesh surface of the filter chamber


 
The Pre-Filter 



The Activated Carbon Filter



Can be vacuumed from the exterior of the unit
once a month or more often.
Should be replaced at least after 12 months of use



Should be replaced at least every 12 months of normal 
use 

 
Turn over 
the Airpura 


Remove the 
4 retaining 
screws


Take off 
the cover

 
To open the filter chamber

 
Remove the 
gasket

 
Unfold the filter slider(Supplied with replacement filters or on request Part#6F 001) 
Roll it into a spiral 
Insert the tube into the filter chamber inside the pre-filter
Let the spiral open to fill the opening
Open the top of the spiral to make a slight funnel
Insert the carbon canister into the funnel and hold it straight
Let the canister slidedown the filter slider
Pull the filter slider upout of the cavity using both hands and let the canister slide to the bottom of the cavity
Remove the filterslider and fold it for further use
Place a felt gasketat the bottom of the filter chamber
Position the pre-filterinside the filter chamber  
See over for 
closing the 
filter chamber

 
Slide in the HepaBarrier 
Should be changed as needed in heavy applications and 
at least every 24 months in normal use.