AirComm Corporation Cessna 182T T182T Maintenance Manual
Here you can view all the pages of manual AirComm Corporation Cessna 182T T182T Maintenance Manual. The AirComm Corporation manuals for Other are available online for free. You can easily download all the documents as PDF.
Page 41
Products, Inc. CR-182-10 System Service Manual 21-50-03 Page 1 April 5, 2002 COMPRESSOR DESCRIPTION AND OPERATION 1. GENERAL The compressor is mounted on brackets in the engine compartment and is driven by a belt running to the starter ring-gear pulley. The compressor compresses the refrigerant gas for condensing at ambient temperatures and pumps the refrigerant through the system. The compressor clutch is powered by 28 VDC. This section of the maintenance manual discusses...
Page 42
Products, Inc. CR-182-10 System Service Manual 21-50-03 Page 201 April 5, 2002 COMPRESSOR MAINTENANCE PRACTICES 1. GENERAL The following procedures are used to perform typical maintenance on the compressor assembly. 2. TOOLS AND EQUIPMENT DESIGNATION REF. NO. QTY. REMARKS Polyolester oil Comm Avail A/R Viscosity ISO 68 3. COMPRESSOR ASSEMBLY MAINTENANCE PROCEDURES A. Compressor drive belt adjustment: 1. Adjust belt for moderate tension and then rotate large...
Page 43
Products, Inc. CR-182-10 System Service Manual 21-50-04 Page 1 April 5, 2002 CONDENSER DESCRIPTION AND OPERATION 1. GENERAL The condenser assembly is located in the tailcone and is attached to support structure mounted to frames in the aircraft. The assembly consists of a condenser coil unit and shroud with associated brackets. The condenser converts the refrigerant from a gas to a liquid. The receiver/drier bottle removes moisture from the refrigerant. The condenser fan draws...
Page 44
Products, Inc. CR-182-10 System Service Manual 21-50-04 Page 201 April 5, 2002 CONDENSER MAINTENANCE PRACTICES 1. GENERAL The following procedures are used to perform typical maintenance on the condenser assembly. 2. TOOLS AND EQUIPMENT DESIGNATION REF. NO. QTY. REMARKS Vacuum Cleaner Comm Avail 1 None Coil Cleaner Comm Avail A/R Non-acid based 3. CONDENSER ASSEMBLY MAINTENANCE PROCEDURES A. Condenser coil cleaning procedure: 1. Remove condenser coil from...
Page 45
Products, Inc. CR-182-10 System Service Manual 21-50-05 Page 1 April 5, 2002 EVAPORATOR DESCRIPTION AND OPERATION 1. GENERAL The evaporator assemblies are mounted aft of the cabin on the right side of the aircraft. The evaporator assemblies are made up of an evaporator coil, and blower. Cabin air is pulled through the evaporator coil, cooled and then distributed back to the cabin. This section of the maintenance manual discusses maintenance practices used for the evaporator...
Page 46
Products, Inc. CR-182-10 System Service Manual 21-50-05 Page 201 April 5, 2002 EVAPORATOR MAINTENANCE PRACTICES 4. GENERAL The following procedures are used to perform typical maintenance on the evaporator assembly. 5. TOOLS AND EQUIPMENT DESIGNATION REF. NO. QTY. REMARKS Vacuum Cleaner Comm Avail 1 None Coil Cleaner Comm Avail A/R Non-acid based 6. EVAPORATOR ASSEMBLY MAINTENANCE PROCEDURES B. Evaporator coil cleaning procedure: 1. Remove evaporator coil...
Page 47
Products, Inc. CR-182-10 System Service Manual 21-50-06 Page 1 March 16, 2006 ILLUSTRATED PARTS CATALOG
Page 48
Products, Inc.
CR-182-10 System Service Manual
21-50-06
Page 101
October 15, 2009
182-0200-1 Evaporator Installation
With 182-0250-1 Evap Assy.
Page 49
Products, Inc.
CR-182-10 System Service Manual
21-50-06
Page 102
October 15, 2009
182-0200-1 Evaporator Installation
With 182-0251-1 Evap Assy.
Page 50
Products, Inc.
CR-182-10 System Service Manual
21-50-06
Page 103
October 15, 2009
ITEM PART
NUMBER NOMENCLATURE UNITS PER
ASSEMBLY
1 182-0200-1 Evaporator Installation
2 182-0250-1
182-0251-1 Evaporator Assembly (Alternate Spare
182-0251-1)
Evaporator Assembly (Alternate Spare
182-0250-1) 1
3 182-0250-2 Evaporator Cover Assembly 1
4 ES73088-10 Blower Wheel 1
5 ES61060-2
ES61027-10 Motor (182-0250-1 only)
Motor...