Home
>
Air Vent Inc.
>
Solar Attic Fans
>
Air Vent Inc. Solar Powered Attic Fans Installation Instructions
Air Vent Inc. Solar Powered Attic Fans Installation Instructions
View the Air Vent Inc. Solar Powered Attic Fans Installation Instructions for free. All the Air Vent Inc. manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 1
Installation and Mounting Guide
Florida Building Product Approval and Texas Department of Insurance (TDI) Approval. Use all 8 flashing screws include\
d in package to
comply with severe weather building codes. Includes Solar Controller™\
for after dark operation.
BEFORE YOU INSTALL - Install only one type of exhaust vent and remove or plug any existing ve\
nts (gable vents, roof louvers,
ridge vents and turbines). Install adequate intake ventilation for a Ba\
lanced System (50% Exhaust & 50% Intake)...](http://img.usermanuals.tech/thumb/246/3960/w300_solar-powered-attic-fans-installation-instructions-1478657761_d-0.png "Page 1
Installation and Mounting Guide
Florida Building Product Approval and Texas Department of Insurance (TDI) Approval. Use all 8 flashing screws include\
d in package to
comply with severe weather building codes. Includes Solar Controller™\
for after dark operation.
BEFORE YOU INSTALL - Install only one type of exhaust vent and remove or plug any existing ve\
nts (gable vents, roof louvers,
ridge vents and turbines). Install adequate intake ventilation for a Ba\
lanced System (50% Exhaust & 50% Intake)...")
![Page 2
Step 4 – Lifting the Shingles
The nails located 5” above and to the side of the hole will need to be removed for the solar fan flashing
to slip between the felt paper and the shingles – (fig. 4) You should use a pry bar or reciprocating saw to
loosen or cut any nails and/or staples.
Do not attempt to force the unit into place. If it does not slide easily into place, a nail is most likely
obstructing the flashing. In some cases the builder may have used lar\
ge washers to install the felt paper. In...](http://img.usermanuals.tech/thumb/246/3960/w300_solar-powered-attic-fans-installation-instructions-1478657761_d-1.png "Page 2
Step 4 – Lifting the Shingles
The nails located 5” above and to the side of the hole will need to be removed for the solar fan flashing
to slip between the felt paper and the shingles – (fig. 4) You should use a pry bar or reciprocating saw to
loosen or cut any nails and/or staples.
Do not attempt to force the unit into place. If it does not slide easily into place, a nail is most likely
obstructing the flashing. In some cases the builder may have used lar\
ge washers to install the felt paper. In...")
All Air Vent Inc. manuals