Air Oasis nano HCT 14 Induct User Manual

							14” NANO INDUCT
Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 79118 
						

							Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 791182
AHPCO Technology 
						

							Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 791183
What Is It?
The 14” nano Induct is an air purifier designed to be duct mounted in a HVAC (Heating
Ventilation and Air Conditioning) system. The 14” nano Induct is capable of cleaning 
the air in every area supplied by the HVAC system, making this unit more efficient than 
standalone or countertop air purifiers that only cover a single r oom. We recommend 
using the 14” model in areas above 3500 square feet* or in areas of higher 
contamination.
This air purifier quickly and effectively reduces carbon-based contaminants, providing 
fresh, clean smelling air in only minutes. What are carbon-based contaminants? Some 
of the more familiar carbon-based contaminants include mold, bacteria, viruses, odors 
and volatile organic compounds.
We accomplish all this by using the AHPCO (advanced hydration photocatalytic 
oxidation) technology developed by NASA and enhanced by the Air Oasis r esearch 
and development team (Dr. Jeff Bennert, Jon Bennert and Dr. Nabarun Ghosh).
The 14” nano Induct installs in less than 15 minutes, connecting to a standar d 
110VAC -240VAC electrical outlet or hardwired to a 24VAC power source. There are 
no complicated multiple settings to learn, no routine maintenance to perform, or filters 
to change or clean. The only maintenance required is changing the AHPCO Cell every 
two years. The blue lamp replacement LED indicates when the AHPCO Cell is ready 
for replacement. This air purifier is virtually maintenance free!
How It Works
1. The germicidal UVC lamp destroys germs as they pass through the rays of UV light.
2. Light rays from the UVC lamp react with the nano Nickel HCT™ catalyst to produce
catalytic molecules.
3. Catalytic molecules seek out and destroy carbon-based molecules by converting 
them into harmless carbon dioxide and water.
Energy efficient:
Many commercial air purifiers use well over 100 Watts of electricity. The Air Oasis 9” 
nano Induct uses less electricity than a 45-Watt light bulb, saving you money and 
saving the environment every day.
* May vary depending on climate zone. 
						

							Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 791184
This compact unit allows for multiple applications installation scenarios:
- They can be mounted in either the supply side or return side of your HVAC system.
  Place the nano Induct within 10 feet of an electrical outlet. To help you determine the
   optimal placement we listed a few examples:
- Above coils to reduce mold and bacteria growth on the coils.
- Reduce contaminants in ductwork by mounting the nano Induct in the plenum on the
   supply side of the HVAC system.
- In large commercial applications air becomes re-contaminated as it travels through                      
   the ductwork. Therefore we designed this extremely compact unit to give you the       
   ability to mount several nano Induct units throughout the ductwork.
- Reduce airborne contaminants in a room by installing the nano Induct within 10 feet   
   of the air outlet vent supplying the air to the room being treated.
Benefits
Our Air Oasis nano Induct Air Sanifiers® are a great buy for customers who want a 
unit that is energy-efficient and compact. Unlike other home air filtration systems, 
which tend to use more than 100 watts of electricity, the nano Induct uses less power 
than a 45-watt bulb! Its compact size allows it to be installed in many areas. It can 
easily be mounted to the supply or return side of your HVAC system, within 10 feet 
of an outlet. It can be placed above coils to reduce mold and bacteria growth or in 
the plenum on the supply side of the HVAC in order to reduce contaminants in the 
ductwork and throughout your home or office more efficiently.
All of our products are durable and made in the U.S. at our Amarillo, TX, factory. 
Each unit goes through a comprehensive quality inspection process, so you can rest 
assured that you are receiving the highest-quality products available. We assemble 
our all of our units by hand and make many of our own components in-house; this  
gives us even greater control over the quality of our products. Feel free to contact us 
online or call at 1-800-936-1764 if you have any questions or concerns. 
						

							Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 791185
Features
Simple Operation: The nano HCT 9″ Induct 
installs in less than 15 minutes, connecting to 
a standard 110VAC – 240VAC electrical outlet 
or hardwired to a 24VAC power source. Once 
installed and plugged in it’s busy cleansing 
your air 24 hours a day.
• No routine maintenance to perform
• No filters to change or clean
•  AHPCO cell only needs replacing every
   2 years
 Power Source:
• 26VDC power adapter (included in price) –    
  100 – 240 VAC input/interchangeable power   
   cord for global applications
• 100 – 240 VAC input
• Interchangeable power cord for global
   applications
• Optional 24 VAC Internal HVAC Power     
   Source Wiring
Coverage: Areas up to 6500 sq. ft.* 
7+ Tons
2800 CFM
Indicator Lights:
• Indicator lights provide specific in 
   formation about the operating
   status
• Indicates when the AHPCO cell is  
   ready for replacement
Durable Construction:
• Anodized aluminum UV shields sur  
   rounding UV lamp
• Polycarbonate housing that is VO  
   fire rated and UV stabilized
• Made in the USA
Warranty:
• 2 year warranty
* May vary depending on climate zone. 
						

							Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 791186 
						

							Product Sheet | By Air Oasis
Air Oasis, LLP • 3401 Airway Blvd • Amarillo Tx 791187