Air Live Router WL-1500R User Manual

							
PPPoE with Specify IP 
If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP will provide a Password, User Name and a 
Specify IP Address, choose this option and enter the required information. 
 
Figure 35. 
AirLive WL-1500R User’s Manual 
28  
						

							
PPTP/L2TP with Obtain IP Automatically 
If connected to the Internet using a PPTP/L2TP (Dial-up xDSL) connection, enter the your Server IP, PPTP/L2TP Account 
and PPTP/L2TP Password, if your ISP has provided you with a DNS IP address, enter it in the DNS field, otherwise, 
leave it zero. 
 
Figure 36. PPTP 
 
 
Figure 37. L2TP 
 
 
PPTP/L2TP with Specify IP 
If connected to the Internet using a PPTP/L2TP (Dial-up xDSL ) connection, enter the your IP Address, Subnet Mask, 
Gateway IP address, DNS IP address, Server  IP address, PPTP Account and PPTP Password. 
 
Figure 38. PPTP 
 
 
Figure 39. L2TP 
 
 
                                                             AirLive WL-1500R User’s Manual 
29  
						

							
BigPond Cable 
If your ISP is Big Pond Cable, the ISP will provide a User Name, Password, Authentication Server and Login Server IP 
(Optional).  Choose this option and enter the required information. 
 
 
 
 
Dynamic DNS:   
This synchronizes the DDNS server with  your current Public IP address when you  are online.  First, you need to register 
your preferred DNS with the DDNS provi der.  Then, please selected one of DDNS  server than fill the related information 
in the below fields: Host Name, User Name and Password. 
 
Figure 40. 
AirLive WL-1500R User’s Manual 
30  
						

							
Wireless setting 
This section enables user to set wireless communications parameters for the routers wireless LAN feature. 
 
Basic 
This page allow user to enable and disable the wireless LAN  function, create a SSID, and select the channel for wireless 
communications. 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 41. 
 
Wireless:  Enables or disables the wireless LAN function of the wireless LAN Router. 
SSID: Type an SSID in the text box. The SSID of any wireless  device must match the SSID typed here in order for the 
wireless device to access the LAN and WAN via the router. 
Extended Range Mode:  Enable and disable the wireless Extended Range enhancement. 
SSID Broadcast: While SSID Broadcast is enabled, all wireless client s will be able to view the WLAN Router’s SSID. For 
security purposes, users may want to disable SSID Broad cast to ensure only authorized clients have access.   
Channel: Select a transmission channel for wireless communicati ons. The channel of any wireless device must match 
the channel selected here in order for the wireless  device to access the LAN and WAN via the router. 
                                                             AirLive WL-1500R User’s Manual 
31  
						

							
Security 
This function enables user to set authentication type for secure wireless communications. Open System allows public 
access to the router via wireless communications. Shared Ke y requires the user to set a WEP key to exchange data with 
other wireless clients that  have the same WEP key. This router also  supports WPA, WPA2 and WPA-PSK, WPA2-PSK. 
 
Figure 42. 
 
Security: Enable or Disable the wireless LAN security. 
 
WEP 
 
Figure 43. 
AirLive WL-1500R User’s Manual 
32  
						

							
WEP: Open System and Shared Key requires the user to set a W EP key to exchange data with other wireless clients that 
have the same WEP key. 
WEP Key Format:  Select the key format from the drop-down list HEX or ASCII. 
WEP Key Length:  Select the level of encryption from the drop- down list. The WLAN Router supports, 64 and 128-bit 
encryption. 
WEP Key 1 ~ 4:  Enables users to create up to 4 different WEP keys. Manually enter a se t of values for each key. Select 
a key to use by clicking the radio button next to  the key. Click “Clear” to erase key values. 
WPA-PSK / WPA2-PSK 
 
Figure 44. 
 
Figure 45 
 
If WPA or WPA2 PSK is selected, the above screen is shown.  
Encryption Type: Select the encryption type for TKIP or AES encryption.  
Passphrase: The length should be 8 characters at least. 
                                                              AirLive WL-1500R User’s Manual 
33  
						

							
WPA / WPA2 
Figure 46. Figure 47 
 
If WPA or WPA2 EAP is selected, the above screen is shown.  Pl ease set the length of the encryption key and the 
parameters for the RADIUS server. 
Encryption Type:  Select the encryption type for TKIP or AES encryption.  
RASIUS Server: 
Enter the IP address, Port used and Shared  Secret by the Primary Radius Server. 
Enter the IP address, Port used and Shared Secret by the Secondary Radius Server. (optional) 
AirLive WL-1500R User’s Manual 
34  
						

							
Advanced 
This function enables user to configure advanced wireless functions. 
 
Figure 48. 
 
Beacon Interval: Type the beacon interval in the text box. User ca n specify a value from 20 to 1000. The default beacon 
interval is 100. 
RTS Threshold:  Type the RTS (Request-To-Send) threshold in the text  box. This value stabilizes data flow. If data flow is 
irregular, choose values between 256 and 2346 until data flow is normalized. 
Fragmentation Threshold:  Type the fragmentation threshold in the text box. If packet transfer error rates are high, 
choose values between 1500 and 2346 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold 
value may diminish system performance.) 
DTIM Interval:  Type a DTIM (Delivery Traffic Indication Message) in terval in the text box. User can specify a value 
between 1 and 255. The default value is 1. 
TX Rates:  Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the 
speed of wireless adapters connected to the WLAN. 
                                                              AirLive WL-1500R User’s Manual 
35  
						

							
LAN Setting 
The function enables user to configure the LAN port IP address & DHCP Server. 
 
Basic 
This page leads to set LAN port properties, such  as the host name, IP address, and subnet mask. 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 49. 
 
Host Name: Type the host name in the text box. The host name is required by some ISPs. The default host name is 
Wireless Router 
IP Address:  This is the IP address of the router. The default IP address is 192.168.1.1. 
Subnet Mask: Type the subnet mask for the router in the text  box. The default subnet mask is 255.255.255.0. 
 
DHCP 
 
Figure 50. 
AirLive WL-1500R User’s Manual 
36  
						

							
                                                             AirLive WL-1500R User’s Manual 
37 
 
DHCP Server:  Enables the DHCP server to allow the router to automatically assign IP addresses to devices connecting 
to the LAN. DHCP is enabled by default. 
DHCP Server Start IP: Type an IP address to serve as the start of  the IP range that DHCP will use to assign IP 
addresses to all LAN devices  connected to the router. 
DHCP Server End IP: Type an IP address to serve as the end of the IP  range that DHCP will use to assign IP addresses 
to all LAN devices connected to the router. 
Lease Time:   The lease time specifies the amount of connection time  a network user be allowed with their current 
dynamic IP address. 
Add Static DHCP:  Selected Enable the Static DHCP allows you to assign a  static IP address to the PC that has the IP 
address and MAC address mapping se t in the Static DHCP List. 
Static DHCP List: The static DHCP mapping will list in the table, prov iding the Host Name, MAC Address and IP Address.  
Dynamic DHCP List: All dynamic DHCP client computers are listed in  the table and providing the Host name, IP address, 
and MAC address and Expired Time of the client.