Air Live Router IP-1000R User Manual

							
 49
Example: 
 
 
 
Configuration on NAT Router 
Destination           SubnetMask        Gateway         Hop        Enabled 
192.168.1.0          255.255.255.0      192.168.123.216       1            ˇ 
192.168.0.0          255.255.255.0      192.168.123.103       1            ˇ 
 
So if, for example, the client3 wanted to send an  IP data gram to 192.168.0.2, it would use the above 
table to determine that it had to  go via 192.168.1.103 (a gateway),   
And if it sends Packets to 192. 168.1.11 will go via 192.168.1.216 
Each rule can be enabled or disabled individually. 
After  routing table  setting is configured, click the  save button.  
						

							
 50
4.7.6 Schedule Rule 
 
 
 
You can set the schedule time to decide which servic e will be turned on or off. Select the “enable” item. 
Press  “Add New Rule” 
 
You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. 
The following example configure “ftp time” as everyday 14:10 to 16:20 
 
  
						

							
 51
After configure Rule 1
Æ 
 
 
 
Schedule Enable 
Selected if you want to Enable the Scheduler.   
Edit  
To edit the schedule rule.   
Delete  
To delete the schedule rule, and the rule# of t he rules behind the deleted one will decrease one 
automatically. 
Schedule Rule can be apply to Virtual server and Packet Filter, for example:  
						

							
 52
 
Exanple1: 
Virtual Server  – Apply Rule#1 (ftp time: everyday 14:10 to 16:20)
 
 
 
Exanple2:  Packet Filter  – Apply Rule#1 (ftp time: everyday 14:10 to 16:20). 
 
  
						

							
 53
4.8 Maintenance 
 
  
						

							
 54
4.8.1 Change Password 
 
 
You can change Password here. We 
strongly recommend you to change the system password for 
security reason. 
 
4.8.2 System Log 
 
You can View system log by clicking the  View Log button  
						

							
 55
4.8.2 Firmware Upgrade 
 
 
 
You can upgrade firmware by clicking 
Firmware Upgrade button.  
						

							
 56
 
4.8.3 Backup Setting 
 
 
 
You can backup your settings by clicking the  Backup Setting button and save it as a bin file. Once you 
want to restore these settings, please click  Firmware Upgrade button and use the bin file you saved. 
 
4.8.4 Reset to default 
 
 
 
You can also reset this product to factory default by clicking the  Reset to default button. 
 
4.8.5 Reboot 
 
 
 
You can also reboot this product by clicking the  Reboot button. 
 
  
						

							
 57
4.8.6 Miscellaneous Items 
 
 
 
MAC Address for Wake-on-LAN 
Wake-on-LAN is a technology that enables you to po
wer up a networked device remotely. In order to 
enjoy this feature, the target device must be Wa ke-on-LAN enabled and you have to know the MAC 
address of this device, say 00-11-2 2-33-44-55. Clicking Wake up button will make the router to send 
the wake-up frame to the target device immediately.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 58
A
A
A p
p
p p
p
p e
e
e n
n
n d
d
d i
i
i x
x
x  
 
  A
A
A  
 
   
 
  T
T
T C
C
C P
P
P /
/
/ I
I
I P
P
P  
 
  C
C
C o
o
o n
n
n f
f
f i
i
i g
g
g u
u
u r
r
r a
a
a t
t
t i
i
i o
o
o n
n
n  
 
  f
ff
o
o
o r
r
r  
 
  W
W
W i
i
i n
n
n d
d
d o
o
o w
w
w s
s
s  
 
  9
9
9 5
5
5 /
/
/ 9
9
9 8
8
8  
 
 
 
This section introduces you how to install TCP/IP  protocol into your personal computer. And suppose 
you have been successfully installed one network card on your personal computer. If not, please refer 
to your network card manual. Moreover, the Section  B.2 tells you how to set TCP/IP values for working 
with this NAT Router correctly. 
A.1 Install TCP/IP Protocol into Your PC 
1. Click  Start button and choose  Settings, then click  Control Panel . 
2. Double click  Network icon and select  Configuration tab in the Network window. 
3. Click  Add button to add network component into your PC. 
4. Double click  Protocol to add TCP/IP protocol. 
 
 
 
5. Select  Microsoft item in the manufactures list. And choose  TCP/IP in the Network Protocols. Click 
OK  button to return to Network window.