Air Live Router IP-1000R User Manual

 19
4.4.1.6 L2TP 
First, please check your ISP assigned and Select
 Static IP Address or Dynamic IP Address. 
For example: Use Static 
1.      My IP Address and My Subnet Mask: the pr ivate IP address and subnet mask your ISP assigned 
to you.   
2.    Server IP Address: the IP address of the PPTP server.   
3.      PPTP Account and Password: the account and  password your ISP assigned to you. If you don’t 
want to change the password, keep it empty.   
3.      Connection ID: optional. Input the...

 20
 
4.4.1.7 Virtual Computers 
 
Virtual Computer enables you to use the original NA T feature, and allows you to setup the one-to-one 
mapping of multiple global IP address and local IP address.   
•  Global IP: Enter the global IP address assigned by your ISP.   
•   Local IP: Enter the local IP address of your  LAN PC corresponding to the global IP address.   
•   Enable: Check this item to enable  the Virtual Computer feature.    

 21
4.4.2 DHCP Server 
 
Press  “More”  
The settings of a TCP/IP environment include host  IP, Subnet Mask, Gateway, and DNS configurations. 
It is not easy to manually configure all the com puters and devices in your network. Fortunately, DHCP 
Server provides a rather simple approach to handl e all these settings. This product supports the 
function of DHCP server. If you enable this produc t’s DHCP server and configure your computers as 
“automatic IP allocation” mode, then when your com puter is...

 22
4.4.3 Wireless Setting, and 802.1X setting 
 
 
 
Wireless settings allow you to set the wireless configuration items. 
1.  Network ID (SSID) : Network ID is used for identifying t he Wireless LAN (WLAN). Client stations 
can roam freely over this product and other Acce ss Points that have the same Network ID. (The 
factory setting is “ default”) 
2.  Channel : The radio channel number. The permissible channels depend on the Regulatory Domain.   
The factory setting is as follow:  channel 6 for...

 23
802.1X
 
Check Box was used to switch the function of t
he 802.1X. When the 802.1X function is enabled, the 
Wireless user must  authenticate to this router first to use the Network service.   
RADIUS Server 
 
IP address or the 802.1X server’s domain-name.   
RADIUS Shared Key 
 
Key value shared by the RADIUS server and this router . This key value is consistent with the key value 
in the RADIUS server. 
  

 24
WPA-PSK
 
1. Select Preshare Key Mode 
If you select HEX,you have to fill in 64 hexade
cimal (0, 1, 2…8, 9, A, B…F) digits 
If ASCII,the length of preshar e key is from 8 to 63. 
2. Fill in the key, Ex 12345678 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 25
WPA 
Check Box was used to switch the function of 
the WPA. When the WPA function is enabled, the 
Wireless user must  authenticate to this router first to use the Network service. RADIUS Server 
 
IP address or the 802.1X server’s domain-name.   
RADIUS Shared Key 
 
Key value shared by the RADIUS server and this router . This key value is consistent with the key value 
in the RADIUS server. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 26
4.5 Port Forwarding 
 
 
4.5.1 Virtual Server 
 
This product’s NAT firewall filters out unrecognized pa ckets to protect your Intranet, so all hosts behind 
this product are invisible to the outside world. If y ou wish, you can make some of them accessible by 
enabling the Virtual Server Mapping. 
A virtual server is defined as a  Service Port, and all requests to this port will be redirected to the 
computer specified by the  Server IP.  Virtual Server  can work with Scheduling Rules , and give...

 27
Service Port  Server IP  Enable 
21 192.168.1.1 V 
80 192.168.1.2 V 
1723 192.168.1.6 V 
  

 28
 
4.5.2 Special AP 
 
 
 
Some applications require multiple connections, lik e Internet games, Video conferencing, Internet 
telephony, etc. Because of the firewall function, t hese applications cannot work with a pure NAT router. 
The  Special Applications  feature allows some of these applicati ons to work with this product. If the 
mechanism of Special Applications fails to make an  application work, try setting your computer as the 
DMZ  host instead. 
1.  Trigger : the outbound port number...