Air Live Router AM-100E User Manual

User’s Manual 
AM-100E 
Wired Ethernet ADSL Modem  
English ● ●  ● 
Español   ●  ●  ● 
1 
14  

   
 
1 1English Wired Ethernet ADSL Modem   AM-100E 
Basic Information 
POWER Lights up when the Ethernet ADSL Modem is powered on.
LINK/ACT Blinking when the Ethernet ADSL Modem is 
Sending/Receiving data. 
Blinking when the Ethernet ADSL Modem system is ready.ADSL 
Lights up when a successful ADSL connection  is 
established. 
READY Lights up when a PPP connection is established. 
ADSL Port for connecting to the ADSL Service Provider. 
LAN 10/100Mbps Ethernet Ports for connecting to the network...

   
 
2 2English Wired Ethernet ADSL Modem   AM-100E 
Setting Up TCP IP (Win98/ME) 
 1 1
. .
    Right Click on “My Network 
Places” to highlight it and select 
“Properties” on the Desktop 
OvisLink ATXOvisLink ATX 
O2 2
. .
    The Network dialog box will 
open. Click on Internet 
Protocol (TCP/IP) to highlight 
it and then click on 
Properties. 
3 3
. .
    The TCP/IP Properties dialog box 
will open, in IP address section, 
select Specify an IP address(IP 
address:192.168.1.10, Subnet...

   
 
3 3English Wired Ethernet ADSL Modem   AM-100E 
Setting Up TCP IP (Win2000/XP) 
1.  Click on the Start button and 
select Settings then click on 
Control Panel.  
2. Click on Network Connections 
to open the network control 
panel. 
3.  Right Click on the Local Area 
Connection to highlight it and 
select Properties. 
1 
2 
3
 
4 
4. The Local Area Connection 
Properties dialog box will 
open. Click on Internet 
Protocol (TCP/IP) to 
highlight it and then click on 
Properties. 
5.  Manually enter...

   
 
4 4English Wired Ethernet ADSL Modem   AM-100E 
Web Configuration
1 1
. .
    Please make sure you have set your PC’s IP address as indicated in 
the previous sections and connect your PC directly to the LAN port of 
the modem. 
2 2
. .
    Open your web browser and type in router’s IP address (default: 
192.168.1.254) in the Address field. 
 
 
 
 
 
 
3 3
. .
    When asked for login and password.Press enter “admin” for login, 
“airlive” for password. 
4 4
. .
    Once you press enter, you should...

   
 
5 5English Wired Ethernet ADSL Modem   AM-100E 
Web Configuration 
Automatic Setup    
*The automatic setup is base on current available databa se of worldwide 
ISPs. Since ISP might change its settings without notice. Please contact 
with your ISP about the correct setting if Automatic Setup function fails. 
1. Click on “Automatic Setup” in the main menu. 
2. Select your country. 
3. Select your ISP (Some countries do not need this option). 
4. Now your ISP will display the Encapsulation, VPI, and...

   
 
6 6English Wired Ethernet ADSL Modem   AM-100E 
„      After finishing the EZ-setup, please make sure to refer to 
the 1483 Routed Additional Settings section to do 
additional settings. 
• PPPoA: 
„      Press the “Next” button will enter the “Setup PPP” page.   
Enter the username and password information from your 
ISP. 
„      After finishing the EZ-setup, please make sure to refer to 
the Setting Half Bridge section to turn on the “Half 
Bridge” option. 
5. Press the “Save” button and your...

   
 
7 7English Wired Ethernet ADSL Modem   AM-100E 
Manual Setup    
If ISP is not on the list or if Automatic setup doesn’t work, please 
use the Manual Setup. 
Please obtain the Encapsulation, VPI, VCI information from your ISP.   
Different Encapsulation type will bring up different setup screen.
 
A. For ISP with the following “Encapsulation”. 
; PPPoA-LLC 
; PPPoA VC-Mux2 
1. Please enter the Encapsulation, VPI, VCI information from your ISP 
and press “Next” 
2. Enter your “Service Name”(not...

   
 
8 8English Wired Ethernet ADSL Modem   AM-100E 
B. For ISP with the following “Encapsulation”.    Please enter the correct 
Encapsulation and VPI/VCI information in the manual setup page. 
Then you will enter into the Setup - Bridge window 
 
; 1483 Bridged IP LLC 
; 1483 Bridged IP LLC 
; 1483 Bridged IP VC-Mux 
; 1483 Routed IP LLC 
; 1483 Router IP VC-Mux 
; Classical IP over ATM 
• 1483 Bridge and Classic IP over ATM    
Please make sure Bridge mode option is Enabled. 
 
 
 
 
 
 
• 1483 Routed...

   
 
9 9English Wired Ethernet ADSL Modem   AM-100E 
Setting Half Bridge 
If your ISP use PPPoA encapsulation. And you want to connect 
broadband device to the AM-100E. Then, you need to set your 
AM-100E to Half Bridge mode. If your ISP uses other 
Encapsulation type, please ignore this section. 
1. Please open your web browser to get into AM-100E’s web 
management page (Default IP: 192.168.1.254). 
2. On the left menu bar.    Click on ADVANCE->Misc Configuration -> 
PPP Half Bridge.   
3. Enable the...