AIPTEK Pocketcinema V10 Pro Lcos Users Manual

							


Playing back Music
1.  Use the Left/Right button to select “Music” and then press OK button.
2.  Use the Up/Down button to select target folder or MP3 files. Press the OK button to confirm the selection. 
3. After one MP3 file is selected, press OK to play it back. (play once only)
4. Use the Left/Right button to playback last or next mp3 file.
5. When MP3 is playing, use the Up/Down button to adjust the volume up and down.
6. Press OK can pause music, and press OK again can resume playing.
7. Using headphone to listen to music. (also suitable for playing video\
)
 
1) Connect headphone to AV jack of projector. 
 
2) Press 
OK to select “Audio Out”.
The default setting is to play selected video, still picture or music once. If users want to repeat the video, still picture or music (s), please do the following:
1.
 
During the playing back of video, photo, or music, press 
Menu button for 2 seconds to show the function bar on the screen bottom. 
2.
 
Use the
 Up/Down button to select , , or .
 (default setting): No repeat play 
 : Play the video, still picture or music (s) in the same folder
 : Play the video, still picture or music (s) in the memory card or internal built-in memory.
Repeat playing video, still picture or music  
Headphone jack
Headphone adapter
  If the projector stays inactive for 20 seconds, the screen will automat\
ically turn off.
Downloaded From projector-manual.com Aiptek Manuals 
						

							
1010

Playing back files in other devices
 Connecting the projector to your media players
Steps of connecting projector with external player:
Before connecting your media player to projector, you need to have media player dedicated composite AV-out cable and projector AV cable ready.
1. Connect Composite AV-out cable to media player.
2. Connect both AV cables (Yellow to Yellow, white to white and red to red).
3. Select “AV in” when you are asked to select “AV in” or “Audio out”.
4. Now you can project image and audio from projector. You also can control the volume from control panel (Up/Down button).
Video/Music Player
Mobile Phone
Portable Media Player
Digital camcorder/camera
AV OUT

(red)
(yellow)
(white)
(red)
(yellow)
(white)
Projector AV cableComposite AV-out cable
Downloaded From projector-manual.com Aiptek Manuals 
						

							
1111

 Connecting the projector to your laptop PC
Before connecting your laptop PC to projector, you need to have Composite/S-video adapter, RCA (dual male) connector, and projector AV cable ready.
1. Turn on laptop PC and projector first. 
2. Connect one end of the Composite/S-video adapter to the S-video port \
of laptop PC and the other end to RCA (dual male) connector.
3. Connect the other end of RCA (dual male) connector to projector AV cable (yellow).
4. Connect the AV cable to the AV jack of projector.
5. Select “AV in” when you are asked to select “AV in” or “Audio out”.
6. Switch the laptop display mode from LCD mode to TV mode.
  Please make sure that your laptop PC is equipped with S-video port.
AV OUT
(red)
(yellow)(white)
S-video portRCA (dual male) connectorS-video cable
Downloaded From projector-manual.com Aiptek Manuals 
						

							
11

Menu operation
The menu items provide several options for you to fine-tune your projector functions. The following table gives details on menu operations.
How to...Action
Bring up the menuPress the MENU button. 
Move the highlight barUse the Up/Down button or Left/Right button.
Enter sub-menu/Confirm an itemPress the OK button.
Exit menu/Go back to upper menuPress the MENU button (when in sub-menu).
Menu items in Settings mode
Power-on → Select the Settings mode → Press the OK button.
ItemOptionDescription
Language-Lets you select the language used for OSD.Brightness-4 ~ +4Set projection screen brightness. Contrast-4 ~ +4Set projection screen contrast.Saturation-4 ~ +4Set projection screen color saturation.Slideshow Speed3 sec, 5 sec,  8 sec, 15 secSet the interval time between each slide
Auto Power Off
OffDisable Auto-off function.
3 minThe projector automatically shuts down when staying inactive for over 3 minutes.
5 minThe projector automatically shuts down when staying inactive for over 5 minutes.
BeepOnEnable beep sound.OffDisable beep sound.
DefaultYesRestore factory defaults. Note that your current settings will be overridden.NoCancel action.
Downloaded From projector-manual.com Aiptek Manuals 
						

							
11

     Please follow the procedures below to manage files in either built-in memory or memory card. 
1. Make sure the projector is powered off if the battery is installed.  2. Connect one end of the bundled USB cable to the USB port of the proje\
ctor and the other end to a powered PC.  
3. Turn on the projector: Press and hold down the Power button for 4 seconds till you hear music. 
4. A removable disk will appear in your computer. 
             
 PC can only recognize one storage medium each time (check memory card \
first, then built-in memory if no memory cards is inserted).    
  Do not switch the storage medium during operation.    
  When connecting the projector to PC USB port without turning on the projector, the PC starts charging the battery inside the projector. To read the files in the memory, press the Power button or remove the battery first.
Managing the files in built-in memory or 
memory card from PC
Downloaded From projector-manual.com Aiptek Manuals 
						

							
1414

IconDescription
Full battery life
Moderate battery life
Low battery life
 Empty battery life
Note 1: To avoid sudden outage of power supply, you are recommended to plug AC power  adapter first then take off the battery when the icon indicates low battery life. 
Note 

:
 When “Battery Low” message appeared on the screen, the projector w\
ill be powered off automatically.
Battery Life Indicator
Remote Controller
Power off button
Volume control buttons
Exit button
Right button
OK/Play/Pause button
Left button
Up button
Down button
Menu button
Downloaded From projector-manual.com Aiptek Manuals 
						

							
11

Specifications
ItemDescription
Optical TechnologyLCoS
Light SourceWhite LED
Aspect Ratio4:3
Luminous Flux10 Lumens (Max.)
Resolution640 x 480 (VGA)
Projection Image Size6” ~ 50” (15cm ~ 127cm) (Diagonal)
Projection Distance25cm ~ 180cm
Zoom & FocusManual
Projection SourceExternal from 3-in-1 AV jack, built-in memory or memory card
Play back formatPhoto: .JPEGAudio: .MP3 Video: .MPEG-4 (.AVI, .ASF, .MP4), H.264 (.MP4), M-JPEG (.AVI) through ArcSoft Media Converter. 
Audio speakerStereo (0.5W x 2)
Memory SlotSD/SDHC/MMC/MS Pro
Power SupplyAC power adapter or NP120 Li-Lon rechargeable battery
Operation temperature0°C ~ 35°C
Dimension125mm x 55mm x 23mm
Weight100g (without battery)
Note: Specifications are subject to change without notification.
Downloaded From projector-manual.com Aiptek Manuals