AIPTEK Pocketcinema V10 Lcos Users Manual

If the time arises to throw away your product, please 
recycle all the components possible. 
Batteries and rechargeable batteries are not to be 
disposed in your domestic waste! Please recycle 
them at your local recycling point. 
Together we can help to protect the environment. 
Welcome:
7KDQN\RXNLQGO\IRUSXUFKDVLQJWKLV¿QHSURGXFW
Much investment in time and effort has gone into its development, and it is our hope 

Safety Notice:
1. Do not drop, puncture or disassemble the device; otherwise the...

Table of Contents
Getting Started1
Projector parts ...................................................................................... 1
Reading LED indicators ........................................................................ 2
Installing the battery.............................................................................. 2
Charging the battery ............................................................................. 2
Inserting a memory card (optional)...

1
Getting Started
Projector parts
Focus switch
Speaker
Strap holder USB connector
Tripod socket
Lens Battery cover
SD/MMC card slot
Speaker
AV jack
Left button
Right button
Menu button Power buttonUp button
Down button
OK button
Power/Charging
LED
Downloaded From projector-manual.com Aiptek Manuals 

2
H
1. Connect the cable.
Connect one end of the supplied AC adapter to the 
USB port of the projector and the other end to a wall 
outlet.
OR
Connect one end of the supplied USB cable to the USB 
port of the projector and the other end to a powered 
PC. Make sure the projector is powered off.
2. The charging LED turns orange and the charge starts.
3.
When the charging is interrupted or the battery pack is 
fully charged, the charging LED will turn green.
 When using a PC to charge the battery, do not...

3
To insert a memory card, do the following:
(1) Open the SD card cover. 
(2) Gently push the card as indicated until the card reaches 
the bottom of the slot. 
To remove the memory card, gently push it down and it will 
pop up. Then pull the card out of the slot. 
Inserting a memory card (optional)
Press and hold down the Power button for 4 seconds to turn 
on the projector.
To turn off the projector, press and hold down the Power
button for 2 seconds.
Turning on/off your projector
Adjusting the Focus...

44
Introduction to main menu
After turn on the projector, you will see “Welcome´VFUHHQ¿UVWWKHQPDLQPHQXDV
below.
Settings: This function allows users to set some preference settings such as 
Language, Brightness, Contrast, Saturation, Slideshow Speed, 
                Auto power off and Beep sound.
VideoPVFUHHQ
PhotoWIURPVFUHHQ
MusicHSURMHFWRU
Memory: This function allows users to check the available memory type and 
               capacity and select it for target source for...

55
This function is to select which memory type to playback from and its capacity and 
available size. The default is built-in memory.
1. Use the
 Left/Right button to select “Memory” and then press OK button.
2. The Memory Check box will display as below. Use the Up/Downbutton to select the 
memory type.
Selection Memory Available/Capacity
669MB / 979MB
1.9GB / 1.9GB
3. PressOK button after selection to return to the main menu.
Checking Memory
 If there is no memory card inserted, the screen will only...

66
Playing Video
1. Use the Left/Rightbutton to select “Video” and then press OKbutton.
2.  Use the Up/DownUHHQ
of each video. Press the OK
require more time to switch.)
:KHQVHOHFWLQJRQH9LGHR

77
Playing back still pictures
1. Use the Left/Rightbutton to select “Photo” and then press OKbutton.
2.  Use the Up/Downbutton to select target folder or photo to see the pre-view image. 
Press the OKEXWWRQWRFRQ¿UPWKHVHOHFWLRQ
3. After a photo is selected, press OKto display full size of this photo.
4. Use the Left/Rightbutton to display last or next photo.
When giving a presentation using PowerPoint/PDF documents, please save the 
3373)¿OHLQWRMSHJIRUPDW...

88
Zoom function
1. Press Menu button for 2 seconds to show the function bar on the screen bottom. 
2. Use the Left/Rightbutton to select “Zoom-in” mode and use Down button to enter 
Zoom mode. A small Zoom screen will appear on the right down corner.
3. Press Up button to go for Zoom x2, x3, x4, x1 or Down button for x4, x3, x2, x1 step 
by step.
QZLOOLQGLFDWHWKH
area of the original photo being displayed.
5. Press and hold Right, Left, Up orDown button to move the view screen around 
the photo.
6....