Home > Aiphone > Telephone > Aiphone TW BeaconStrobe Instructions User Manual

Aiphone TW BeaconStrobe Instructions User Manual

Add to Favourites
    Download as PDF

    View the Aiphone TW BeaconStrobe Instructions User Manual for free. All the Aiphone manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 IS Tower Strobe Strobe / Illumination Light Wiring Instructions The following instructions are for wiring the beacon/strobe light on top of TW-Series towers, as well as wiring the panel light located above the panel hole. These instructions apply to models: TW-LCB, TW-LCK, TW-LCR, TW-LCW, and TW-LCY. Locate the beacon/strobe wires and connect to a 24V DC power supply. • Red to +24V DC • Black to - (Ground) • Connect the white trigger wire to the Normally Open (NO) terminal of relay 2 on the IS...
    Page 2 Pg. 2 Tower Strobe Instr. 0813PH Aiphone Corporation 1700 130th AVE NE Bellevue, WA 98005 Ph: (800) 692-0200 Fax: (425) 455-0071 tech@aiphone.com SPECIFICATIONS: Beacon / Strobe: Voltage: 24V DC Current: 300 mA 144 mA @ 24VDC in steady state mode 272 mA @ 24VDC in fl ashing mode Light source: LED Luminous output: 247 lm Wiring: Black: Ground Red: +24V DC White: Trigger (+24V DC) Wiring Distance: 18awg, 980’ Operating temp: -40°F to 149°F Panel light: Voltage: 24V DC...
    Start reading Aiphone TW BeaconStrobe Instructions User Manual

    Related Manuals for Aiphone TW BeaconStrobe Instructions User Manual

    All Aiphone manuals