Aiphone SBXLSE Instructions User Manual

							- INSTRUCTIONS -
The SBX-LSE is an 18-Gauge stainless steel lockable enclosure designed to give the video door station 
added protection during non-business hours.  This enclosure is designed to be mounted with the following 
model Aiphone units: JF-DV, JF-DVF, JK-DV, JK-DVF, JP-DV, and JP-DVF.
Stainless Steel Security Lock Box 
For Video Door Station Models:  JF-DV, JF-DVF, JK-DV, JK-DVF, JP-DV, JP-DVF
CONTENTS:
- SBX-LSE enclosure box
- Mounting plate for JF/JK/JP-DV door station
- “L” bracket (for securing in open position)
1. Pass door station wiring through the 
center of the SBX-LSE and the large 
offset hole in the included mounting 
plate.
2. When mounting to a 1-gang box , the 
SBX-LSE should be secured to the box 
or ring using the MKW-P and included 
screws.  
3. Attach wires to JF/JK/JP-DV door station.
4. When mounting directly to wall surface,  
verify proper orientation and hole 
alignment, secure the SBX-LSE to the 
wall using the corner mounting holes on 
the JF/JK/JP-DV and included screws.  
Otherwise, secure the JF/JK/JP-DV to 
the MKW-P with the provided screws.
5. Secure front chassis to door station using 
included security screw.
JF/JK/JP-DV MOUNTING INSTRUCTIONS:
NOTE:  Customer is to provide a security lock of their 
choosing to lock the panel in the closed position when 
the system is not in use. When in the open position, the 
padlock can be secured to the “L” bracket. 
Page 1
**
**MKW-P for 1-gang mount 
only (sold seperately) 
						

							SBX-LSE Instr.
0415JD
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA  98005
(425) 455-0510
FAX (425) 455-0071Toll Free Technical Support:
1-800-692-0200
E-mail [email protected]
1. Install flush mount backbox per JF/JK/
JP-DVF standard instructions.
2. Pass door station wiring through the 
center of the SBX-LSE and attach to 
door station.
3. Secure the SBX-LSE and JF/JK/JP-DVF 
to the flush mount backbox using the 
included security screws.
JF/JK/JP-DVF MOUNTING INSTRUCTIONS:
NOTE:  Customer is to provide a 
security lock of their choosing to lock 
the panel in the closed position when 
the system is not in use. When in the 
open position, the padlock can be 
secured to the “L” bracket. 
SPECIFICATIONS:
Mounting: JF/JK/JP-DVF mounting 
box, with MKW-P for 1-
gang box or surface mount 
directly to wall surface
Material: 18-Gauge Stainless Steel
Color: Polished Stainless Steel
Dimensions (HxWxD):
Closed- 11-1/4” x 5-7/8” x 1-9/16
Open- 20-3/8 x 5-7/8 x 1-9/16
Interior Depth: 1-1/2”
SBX-LSE Closed
SBX-LSE open w/camera