Aiphone RYIP44 Instructions User Manual

							11
(QWHUWKH6WDWLRQ,IRUWKH,3:$WREHDVVRFLDWHGZLWKHDFKUHOD\RQWKH5
						

							12 | RY-IP44 Programming Manual
•  Open the IX Support Tool and log in to the system being programmed. 
Expand the 1 Station Information tree and click on 2 ,GHQWL¿FDWLRQ. 
2QWKHQH[WDYDLODEOHOLQH assign a Number*, Name*, and select Master Station as the Ty p e for the mobile app. 
WREHDGGHGWRWKHV\VWHP
• Expand the 4 Network Settings tree and click on 5 IP Address. 
7KH,3$GGUHVVRIWKHDGGHGGHYLFHVZLOOEHEODQN(QWHUDQ6 IP Address* and Subnet Mask 

12

456
Click the EXWWRQWRVDYHFKDQJHV
Click the 
EXWWRQWRVDYHFKDQJHV
Note Station Information here to refer to laterNumberName IP Address
...
...
...
...
...
...
...
...
*  For Programmers/Installers: 
    We recommend writing the station Number,      
    Name, and IP Address into this table for  
    reference when setting up the IX Mobile app.
• Expand the  Function Settings tree and click on  Door Release Settings. 
Click the  Individual Master Station Door Release Settings button.


10
11
12
10 Select the newly added mobile master from the drop down. Click 11 Select. To enable door release for all stations for 
this selected master station, click the 12 Apply button.
Adding a Mobile Device to the IX Support Tool 
						

							
1
2

4
5
• 1DYLJDWHWR
						

							14 | RY-IP44 Programming Manual
RZQORDG,;0RELOHIURPWKHApp StoreSM
Connect to the WiFi network associated with the IX Series  
system installation. Once connected, tap on the connected network.
Tap Static and enter the ,3$GGUHVV that was assigned when 
FRQ
						

							15
RZQORDG,;0RELOHXVLQJGoogle PlayTM
Connect to the WiFi network associated with the IX Series  
system installation. Once connected, tap and hold on the 
connected network.
A pop-up will appear. Tap 0RGLI\QHWZRUNFRQ¿J.
Check the box beside 
Show advanced options.
8QGHU
IP settings, select Static and enter the ,3$GGUHVV that 

Tool. Once entered, tap Save.


the ixapp_settingsIROGHU3DVWHWUDQVIHUWKHFRQ
						

							RY-IP44 Wiring
16 | RY-IP44 Programming Manual
Aiphone Corporation
[email protected]

RY-IP44 Dimensions
´
´
Mounting:
The RY-IP44 adaptor mounts to an Aiphone 
:,1PRXQWLQJUDLOVROGVHSDUDWHO\ HSWK
´
Door release: External signaling:
Inputs:
Connect a normally open (N/O) contact across any 
input and ground.
Power:
8VHD9&P$#9&SRZHUVXSSO\WR
power the RY-IP44 adaptor. 
8VHWKH$LSKRQH
368/SRZHUVXSSO\VROGVHSDUDWHO\ R1
NO
5
NO
PT
RRU
Strike
Bell = 
3RZHU7UDQVIRUPHUXVHSURSHUSRZHUIRUWKHVWULNHPDJORFNRUH[WHUQDOVLJQDOLQJGHYLFHEHLQJXVHG
368/
PT
PT
R2
NO
R4
NO
R1
NO
5
NO
R2
NO
R4
NO
+
-
+
-
I1
I2
G
G
,
I4
Input 1
Input 2
,QSXW
Input 4
Ground
{{
{ {
{
Relay 1
Relay 2
5HOD\
Relay 4{
{ {
{Relay 1
Relay 2
5HOD\
Relay 4
{Power
5HOD\FRQWDFWUDWLQJ9&$
FCC WARNING:


7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFH
7KLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ
•  For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.
• SRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHU