Aiphone NENVPC Instructions User Manual

							+
-
- INSTRUCTIONS -
The NE-NVP/C is a vandal proof and weather resistant sub station designed for use with the NEM system.  
It is constructed of 12 gauge carbon steel with a white powder-coated finish.  The NE-NVP/C will flush 
mount into a 3-gang masonry type box (Raco model 692 or equivalent) or surface mount using the 
SBX-NVP.  Tamper proof screws and a tool for installation are included.
WIRING DIAGRAM:
Vandal Proof  and Weather Resistant Sub Station for NEM
SBX-NVP 
Surface Mount Box for NE-NVP/C
Pg. 1
1
2
3
~
20
E
+
-
HRed
Blk
Blu
Red
Blk
Blu
Wht
NEM, NDRNE-NVP/C
NE-NVP/C
PS-2420UL
Red
Blk
Blu
NE-NVP/C
Blu
Blu
NBY-4ARY-PA
BlkBlk
Yellow
Front View Back View
5-½”
7-½” 
						

							SPECIFICATIONS:
Power Source: Supplied by master station.
Speaker: 20 ohms, 2.5 diameter, water proof and puncture resistant, 2.4 oz. ceramic magnet.
Call Button: SPST call button, momentary activation.
Call Annunciation: Pressing the call button at sub activates and latches call at NEM master. The master
stations LED will be lit and a ringing tone will be heard until the call is answered.
Communication: Hands free at sub.  Master is push-to-talk or VOX handset.
Faceplate: 12 gauge carbon steel with powder-coated white baked epoxy finish.
Mounting Hardware: T10 Torx tamper proof screws and tool included (6x32 for use with flush gang box)
Terminations: Color-coded prewired pigtails
Wiring: 2 conductors homerun; or 1 common plus 1 individual per sub, looped through each sub.   
Shielded cable is recommended.  
Use Aiphone #822202 or #821802 for homerun wiring, #822206 for up to 5 stations  
on each run, or #822210 for up to 9 stations on each run.
Wiring Distance: 420 with 22AWG; 1,000 with 18AWG. 
Dimensions (HxWxD):  NE-NVP/C alone:  7-1/2 x 5-1/2 x 2.  With SBX-NVP:  8-5/8 x 6-5/8 x 2-1/4
Mounting Depth:  Provide mounting box with a minimum depth of 2-1/2 to allow space for internal components.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA  98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
E-mail [email protected]. 2
NE-NVP/C Instr.
0512JD
+
- WIRING DIAGRAM:
1
E
H
2
E
H
3
E
HRed
Blk
Wht
Blu
NDRM Master
CP-544A board
NE-NVP/CNE-NVP/C
(w/dry closure output)
PS-2420UL
RY-PA BlkBlk
Yel Dry closure 
output for 
duration of 
call-in
A+
A-
B+
B-
H
Q
E
S
B
Y
A1
V1
A2
V2
CP-544A board
Red
Blk
Wht
Blu
OPERATION:
1. To place a call from the remote station: Press the call 
button once, then release and wait for a response 
from the master station.  The call tone and LED 
indicator at the master will remain activated until the 
call is answered.  The call indicator LED on the door 
station will be lit to indicate that a call has been 
placed.
2. To answer the call at the master station: Press the 
channel selector button with the lit LED, which              
indicates which remote has called in. Press TALK 
button to talk, release to listen.
3. Speak hands free at the remote station.
4. To conclude the call, press the OFF button.
5. To initiate a call from the master station to the remote, 
simply press the channel selector button, then                     
TALK to speak to the person at the remote. 
6. Press OFF to conclude the call.