Aiphone ISDVF2RAFR Instructions User Manual

							IS-DVF-2RA-FR
Stainless Steel Flush Mount Video Door Station with Standard & Emergency Call Buttons
-INSTRUCTIONS-
STEADY  GREEN INDICA TES CALL  ANSW EREDCALL
EMERGENCY
IS-DVF-2RA-FR
Pg.1
The IS-DVF-2RA-FR is a stainless steel flush mount video door station with standard and emergency 
call buttons. The unit is equipped with signage in French for both the standard and em\
ergency 
buttons. A call status indicator is included to meet rescue assistance requirement\
s. 
The IS-DVF-2RA-FR must connect to the IS-CCU or IS-SCU control units.
1
2
3
4
5
6
7
8
9
IS-DVF-2RA-FR NAMES & FUNCTIONS: 
1. Camera     
6. Call status indicator
2. Microphone    7. French Signage
3. LED Light      8. Call button
4. Speaker      9. Emergency button
5. Name Placard
FEATURES: 
•  Audio communication with visual indentification 
of calling area
•  Two call buttons: Standard and Emergency
•  LED call status indicator
•  CCTV input
•  Red mushroom button for emergency call
•  Two programmable relay outputs for activation 
of external systems/devices
•  Name placard
•  Stainless steel faceplate with tamper resistant 
screws
PACKAGE CONTENTS:
IS-DVF-2RA-FR
Vandal-resistant Door Station
Semi-flush backbox & 
tamper-resistant screws Security Driver
Blank name placard
INSTALLATION: 
•  For flush mounting, cut a hole in the wall and 
use supplied back box.  
Box dimensions are:  
11-1/16” H x 5-13/16” W x 1-3/4” D 
•  For surface mounting, use the SBX-ISDVFRA 
surface mount box. This box can mount to a 
standard 1-gang box or to any flat surface. 
						

							Pg. 2
IS-DVF-2RA-FR Instr.
0716
WIRING DIAGRAM:
IS-DVF-2RA-FRIS-CCU
IS-MV
IS-PU-UL
N/O Dry Contact 
0.5 Amp
CAT-5e
CAT-5e
NO
COM
NC
FCC WARNING:This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1)  This device may not cause harmful interference.
(2)  This device must accept any interference that may cause undesired operation.
•  For proper regulatory compliance, the drain wire should be disconnected at the power 
supply end of the cable.
•  Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.
SPECIFICATIONS:
Camera unit:    CMOS camera
Scanning line:   525 lines
Min. illumination:  5 Lux at 1’6”
Terminations:    RJ45 jack for audio/video
      Screw terminals for door release and relay outputs
Relay rating:    24V AC/DC 0.5A on Door station, 24V AC/DC 1.0A on relay board
Operating Temp:  14° ~ 140°F / -10° ~ 60°C
Wiring Distance:  980’ with Cat5e/6 cable
Dimensions:    11-3/4” H x 7” W
w/SBX-ISDVFRA:  11-11/16” H x 7-1/16” W x 2-13/16” D (top), 1-13/16” D (bottom)
OFFON
NO
NOC
NC
C
NC1234
RELAY BOARD WIRING AND SETTINGS:
Relay 1 Output
N/O, COM, N/C
Relay 2 Output
N/O, COM, N/C
*Relay 2 External Reset
Connect to N/O dry switch
Configuration Switch  See Settings to right
OFF ONNO
NOC
NC
C
NC1234
Board on back of unit See wiring below
ON
1 234
Default Configuration when shipped
Optional Configuration
Normal Call
Emergency Call
Talking
Door Release Trigger Source RY1 Triggered? RY1 Remains ON 
During Talking?
RY2 Triggered?RY2 Remains ON 
During Talking? RY2 Requires 
Reset?YES
NO N/A
YES
YES
YESYES
YES NO
NO
NO
NO N/A
N/A
N/AN/A
N/A
N/A
YES YES
ON
1
234
Contact Technical Support if additional switch configurations 
are required.  
Relay 1 triggers on normal call, emergency call, and communication. Relay 1 remains on during communication.  
Relay 2 triggers on emergency call and remains on during communication.
Relay 1 triggers on normal call, emergency call, and communication. Relay 1 remains on during communication.  
Relay 2 triggers on an emergency call and remains on during communicatio\
n.  Relay 2 requires reset.
Normal Call
Emergency Call
Talking
Door Release Trigger Source RY1 Triggered? RY1 Remains ON 
During Talking?
RY2 Triggered?RY2 Remains ON 
During Talking? RY2 Requires 
Reset?YES
NO N/A
YES
NO
N/A
N/A N/A
YES YES
YES
YES
YES
YESN/A
N/A
N/A
NO
NO YES*
Aiphone Corporation
(800) 692-0200
[email protected]
www.aiphone.com