Aiphone IS Series Local Setting Manual

11
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Making network settings [Network setting]
Make the settings for network according to your 
requirements. 
Click 
1 Network setting in the table of contents.
Make the settings on the following items displayed in 2 the setting window.
Selecting the network setting method
Set a (static) IP address to this unit. Select the method for 
acquiring a (static) IP address between [DHCP] and [Static 
IP Address].
[DHCP]:
• 
Check this when you will...

12
Registering areas 
[System setting – Area registration] Required
Register areas for separating stations in the system. The 
number to which a name is entered is registered as an area 
number. Up to 99 areas can be registered. 
Click 1 Area registration in the table of contents.
Enter an area name in the cell for the area number 01.2 
The fi gures under Number in the tables means the area * numbers.
Enter area names in the cells for other numbers to 3 register more areas.
Click 
4 Temporarily stored to...

13
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Registering stations and PA outputs 
[System setting – Registering stations]
Register all the stations and PA outputs connected in the 
system, and set the area, station no., station name (or PA 
output name) and type of station (for sub stations: video door/
audio door/room sub stations) to them. 
Click 1 Registering stations in the table of contents.
Set the area, station no., station name and type of 2 station (for sub stations) to the...

14
Making detailed settings to stations and 
control units
[System setting – Advanced station settings]
Make detailed settings for the registered stations and control 
units. The settings can be made to a station or control unit 
individually, or multiple stations of the same type at a time. The 
setting items differ from the station or control unit type. First 
select a station (or stations) or control unit, and then open the 
“Advanced settings” window to make the settings.
Basic setting procedure...

15
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
B Settings on [Contact input] window (for room 
sub stations only)
Make settings for contact input.
[Contact type]:
• 
Select either Normally open (NO) or Normally closed (NC).
[Call priority/Answering the page]:• 
You can select the action of the station when detecting 
input between ‘calling with appropriate priority’ and 
‘answering the page’.
Select “Normal”, “Priority”, “Urgent” or “Answering the 
page”.
Close
• 
Click this to close the...

16
Making detailed settings to the central control 
unit, add-on control unit(s) or room sub 
control unit(s)  
NOTE:
Make the settings to the central control unit, add-on control 
unit(s) or room sub control unit(s) respectively. You cannot select 
multiple control units at the same time. 
The following setting item buttons are displayed in the 
“Advanced settings” window.
Click either the button * F or G to open the 
corresponding setting window, and then make the 
settings in the displayed window(s)....

17
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Registering stations and PA outputs to zones
[
System setting – Zone setting]
Assign stations and PA outputs to the registered zones.
Click 1 Zone setting in the table of contents.
Select a zone from the pull-down menu.2 
Click 3 Reference to display all the stations registered 
to the system.
  Another window opens and the registered stations are 
displayed in the list.
Check to select the target stations.4 
Select stations in the following...

18
Registering sound sequences 
[Chime setting – Registering sound sequences]
Register sound sequences for chime. 
Up to 20 sequences can be registered.
* 
Click 1 Registering sound sequences in the table of 
contents.
[Sound number]:2 
Select the sound number to register a sound sequence 
from the pull-down menu.
[Sound sequence name]:3 
Enter the name of sound sequence.
Click 4 Add to add sound fi les to the sound sequence.
Another window appears.
[Step]: 5 
Select an unused step number from the...

19
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Setting chime schedule 
[Chime setting – Chime schedule setting]
You can set a weekly chime schedule or individual daily 
schedule.
* The settings can be made to 1 year ahead.
Click 1 Chime schedule setting in the table of 
contents.
Make the settings by clicking 
2 Weekly schedule, 
Individual schedule and Schedule download 
respectively to open the corresponding window.
Individual schedule*  should be clicked after the target 
date is...

20
Registering daily transfer schedule 
[Transfer setting – Registering daily 
transfer schedule]
You can set the schedule for transferring calls to other master 
stations automatically. The schedules registered on this setting 
are used when making a transfer setting on a master station.
Up to 2 daily schedules can be registered.
Click 1 Registering daily transfer schedule in the 
table of contents.
[Schedule number]: 2 Select the schedule number DT1 or DT2 from the 
pull-down menu.
[Schedule name]: 
3...