Aimco Brakes UFT Series Joint Simulator Operation Manual
Here you can view all the pages of manual Aimco Brakes UFT Series Joint Simulator Operation Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 11
- 9 - Breakdown of the UFT-16 Joint Simulator Index No. Code No. Description Qt y. Index No. Code No. Description Qt y. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 31 -1 32 33 840 -965- 6 840 -718- 6 840 -286- 6 840 -600- 6 840 -318- 6 840 -049- 5 840 -674- 6 840 -604- 6 840 -359- 6 840 -676- 5 840 -546- 5 840 -905- 5...
Page 12
- 10 - Breakdown of the UFT-24 Joint Simulator Index No. Code No. Description Qt y. Index No. Code No. Description Qt y. 1 2 3 4 5 6 7 8 9 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 840- 718-7 840- 397-7 840- 285-7 840- 286-7 840- 600-7 840- 318-7 840- 604-7 840- 357-7...
Page 13
- 11 - Maintenance 1. Inspect the Bolt and Spindle Nut every 50,000 cycles. 2. Should the Plunger not come back up to the top of the Cylinder, then the tester is low on fluid. To fill the tester with fluid, the tester must be level. • Remove the two oil filler plugs from the plunger. • Pull the plunger back up to the top of the cylinder. • While holding the plunger up, fill the tester up through the filler holes with Dextron II. • Reinstall the oil filler plugs. 3. If...
Page 14
- 12 - Certification of the UFT Joint Simulator The UFT tester should be certified every 5,000 cycles. Certification Procedures 1. On the chart below, find the UFT model you are certifying. 2. Next, find the bolt size. 3. With a torque wrench, tighten to the recommended snug torque. 4. Turn the torque wrench the number of degrees recommended from snug for each joint. The torque reading should be the same as shown on the chart. 5. If the readings do not match, the Test...
Page 15
- 13 - List of Hexagon Head Bolts For UFT Joint Simulators MODEL PART NUMBER BOLT SIZE UFT-6 946-967-0 M4 UFT-6 946-968-0 M5 UFT-6 946-969-0 M6 x 18 UFT-S10 946-970-0 M6 x 30 UFT-S10 946-971-0 M8 x 32 UFT-S10 946-972-0 M10 x 35 UFT-10 946-970-0 M6 x 30 UFT-10 946-971-0 M8 x 32 UFT-10 946-972-0 M10 x 35 UFT-S16 946-973-0 M12 x 45 UFT-S16 946-974-0 M14 x 50 UFT-S16 946-975-0 M16 x 50 UFT-16 946-973-0 M12 x 45 UFT-16 946-974-0 M14 x 50 UFT-16 946-975-0...
Page 16
AIMCO CORPORATE HEADQUARTERS AIMCO CORPORATION DE MEXICO SA DE CV 10000 SE Pine Street Ave. Cristobal Colon 14529 Portland, Oregon 97216 Chihuahua, Chihuahua. 31125 Phone: (503) 254– 6600 Mexico Toll Free: 1 -800- 852-1368 Phone: (01-614) 380- 1010 Fax: (01-614) 380- 1019 AIMCO CHINA AIMCO SPAIN Room 607, No. 3998 Hongxin Rd Dibao Plaza Avenida Río Gallo, 431 Minhang District, Shanghai 19174 Galápagos - Guadalajara China Spain Phone: 0086 -21- 34319246 Phone: +...