Home > Aimco Brakes > Nutrunners > Aimco Brakes Nutrunner UOW Series Repair Manual

Aimco Brakes Nutrunner UOW Series Repair Manual

Here you can view all the pages of manual Aimco Brakes Nutrunner UOW Series Repair Manual. The Aimco Brakes manuals for Nutrunners are available online for free. You can easily download all the documents as PDF.

Page 1

PO 
Box  16460,  Portland, OR  97292-0 460  503-2 54-6600   Fax 503-2 55-2615  UOW Series 
Repair  Manual 
UOW -11 & UOW -T60 Series   www.aimco-global.com 

Page 2


				            

Page 3

Contents  
Page  
Number  
1. Tools Needed for Repair 1  
2. Disassembly and Reassembly of the Air Motor 2  
 UOW - 11 Air Motor 3  
 UOW - T60 Air Motor 4  
3. Disassembly and Reassembly of the Clutch
 UOW - T60 5  
4. Disassembly and Reassembly of the Gear Section
 UOW - 11 7  
 UOW - T60 8  
5. Disassembly and Reassembly of Bevel Gear Casing Assembly
 Pinion and Bevel Gear Section 11  
 Socket and Gearing Section 12  
 UOW Bevel Gear Casing 13  
6. Toubleshooting and Preventative Maintenan ce...

Page 4

- 1   -Tools Needed for Repair  
UOW Series Open - End Wrenches  
1. Flat - Head Screwdriver
2. Dental Pick
3. Needle Nose Pliers
4. Pin Punch
5. Ball Peen Hammer
6. Pin Spanner Wrench (Hook Type)
7. Snap Ring Pliers
8. Crescent Wrench
9. Phillips Impact Drive r
10. Spanner Wrench (Expanding Type)
11. Propane Torch
12. Thread Locker 

Page 5

- 2   -Disassembly and Reassembly of the Air Motor  
Disassembly  
1. Remove  the  air motor casing from  the  gear casing connector.
2. Ta ke hold of the end of the rotor   and  pull the air motor out of the  casing.
3. Remove  the  front plate spacer and locking pin.
4. Pull  the  front plate off and remove  the  bearing.
5. Remove blades from  the  rotor.
6. Press the rotor out of  the  rear plate bearing and remove  the  bearing from  the  rear plate.
7. Thoroughly clean all parts.
Inspection  
1....

Page 6

- 3   -Disassembly and Reassembly of the Air Motor   (cont.)  
UOW - 11 Air Motor  
Part 
Number   Description   Part 
Number   Description  
1  
2  
3  
4  
5  
6  
7  
8  
9  
10  
11  
12   Front Plate Bearing  
Front Plate  
Blade  
Rotor  
Cylinder  
Rear Plate  
Rear Plate Bearing  
Rear Plate Spacer  
Packing  
Motor Casing  
Throttle Lever  
Rol l Pin   13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24   Air Inlet Bushing  
Roll Pin  
Valve Bushing  
Reverse Valve  
Valve Rod  
O - Ring...

Page 7

- 4   -Disassembly and Reassembly of the Air Motor   (cont.)  
UOW - T60 Air Motor  
Part 
Number   Description   Part 
Number   Description  
1  
2  
3  
4  
5  
6  
7  
8  
9  
10  
11  
12  
13  
14  
15   Front Plate Spacer  
Pin  
Blade  
Roll Pin  
Roll Pin  
Rear Plate Bearing  
Rear Plate Spacer  
Casing Bushing  
Packing  
Casing  
Throttle Lever  
Roll Pin  
Air Inlet Bushing  
Front Pla te Bearing  
Front Plate   16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30   Rotor...

Page 8

- 5   -Disassembly and Reassembly o f the Clutch  
UOW - T60  Clutch  
Disassembly  
1. Separate the hammer casing from the hammer casing connector and remove the clutch assembly.
2. Remove the clutch spring, spring retainer, and backup ring from cam guide.
3. Carefully slide the cam ring up and remove  the four balls from under it.  Now remove the cam ring.
4. Lift the hooked end of the band spring out of the hole in the cam guide and slide it around the cam guide
until the end of the notch pin is...

Page 9

- 6   -Disassembly and Reassembly of the Clutch   (cont.)  
UOW - T60 Clutch  
Part 
Number   Description   Part 
Number   Description  
1  
2  
3  
4  
5  
6  
7  
8  
9  
10  
11  
12  
13  
14   Hammer Casing Nut  
Ball  
Regulating Dial  
Regulating Screw  
Hammer Casing  
Bearing  
Spring Setter  
Ball  
Snap Ring  
Torque Spring  
Spring Retainer  
Cam Ring  
Spacer  
Notch Pin   15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27   Notch Pin Band  
Spring  
Ball  
Pilot Pin  
Cam  
Snap...

Page 10

- 7   -Disassembly and Reassembly of the Gear Section  
UOW - 11 Gear Section  
Disassembly  
1. Remove the gear casing from the air motor casing (right - hand threads).
2. Remove the first and seco nd gear cage and planet gears.
3. Remove bearing from the gear case.
4. Clean all parts thoroughly.
Inspection  
1. Gears :    Inspect the teeth of the gear casing and the planet gears for pitting and grooving.
2. Needle Rollers :    Inspect the needle rollers for wear.
3. Bearings :    Inspect bearing for...
Start reading Aimco Brakes Nutrunner UOW Series Repair Manual

Related Manuals for Aimco Brakes Nutrunner UOW Series Repair Manual

All Aimco Brakes manuals