Aimco Brakes Cordless Tool Signature Series Precision Clutch Shut Off Pistol Screwdriver SPCP Models User Manual

  
 
MODEL NO.: SPC-P2325Q  
 SPC-P2625Q  
 SPC-P2925Q  
 SPC-P21225Q  
18V Cordless Precision Clutch 
Shut Off Pistol Screwdriver   

2 
 
  

3 
 
(A) 1/4" Hex with quick change chuck. 
(B) Covered Torque Adjustment. 
(C) LED indicator provides simple process information to the operator. 
The signal is visible from any angle. 
(D) LED light for workpiece illumination. 
(E) Tool Trigger with repeat protection feature to avoid double hits on an 
already seated fastener. 
(F) Easy Press button for simple Forward/Reverse selection. 
(G) Ergonomic handle design provides optimal balance. 
(H) Easily attached sliding battery connection. 
( I )...

4 
 
Work Area Safety  
● Keep  your  work  area  clean 
and  well  lit. Cl u tter ed  b en c h es 
and dark areas invite accidents. 
● Do  not  operate  power  tools  in 
explosive atmospheres, such as 
in  the  presence  of  flammable 
liquids,  gases,  or  dust. Pow er 
tools  create  sparks  which  may 
ignite the dust or fumes. 
● Keep  bystanders,  children, 
and  visitors  away  while  oper-
ating  a  power  tool. Di s t r ac -
tions  can  cause  you  to  lose  con-
trol. 
 
Personal Safety 
●...

5 
 
that may be suitable for one tool, 
may  become  hazardous  when 
used on another tool. 
 
Service 
● Tool  service  must  be  per-
formed only by qualified repair 
personnel. Ser vi c e  o r   m ai n te-
nance  performed  by  unqualified 
personnel could result in a risk of 
injury. 
● When servicing an AIMCO Sig-
nature  Series  Precision Clutch 
tool  it  is  important  to  use 
AIMCO  Signature  Series  parts 
and  all  work  should  be  under-
taken  by  a  qualified  AIMCO 
Signature  Series...

6 
 
● Do  not  incinerate  the  battery 
pack  even  if  it  is  severely  dam-
aged  or  completely  worn  out. 
The  battery  pack  can  explode  in 
a fire. 
● Be  careful  not  to  drop,  shake,  or 
strike the battery. 
● Do  not  charge  inside  a  box  or 
container  of  any  kind.  The  bat-
tery  must  be  placed  in  a  well-
ventilated area during charging. 
● Do  not  dispose  of  battery  packs 
into  household  waste,  fire,  or 
water.  Battery  packs  should  be 
collected,  recycled,...

7 
 
This  product  has  been  carefully 
inspected prior to leaving the facto-
ry.  It  should  provide  you  with years 
of  satisfying  service  under  normal 
operating  conditions.  Do  not,  how-
ever,  force  the  tool  to  perform  out-
side  its  design  parameters.  Such 
usage will void the warranty. 
 
  
1. Slide  battery  into  the  bottom  of 
the  housing  handle  until  a  click 
sound  occurs.  Do  not  force  bat-
tery:  It  should  slide  easily  into 
place  with  nominal  force....

8 
 
Steps for Torque Adjustment 
NOTE: Rem o ve  th e  b att er y  p ac k  
before adjusting the torque to avoid 
injury. 
 
1. Lift the torque adjustment cover. 
Use  the  torque  adjust  tool  and 
insert  it  in  to  the  quick  change 
holder  and  turn  until  the  adjust 
hole appears below the cover. 
 
 
 
 
 
 
 
 
 
 
 
 
2. Use  the  torque  adjust  tool  to 
turn  clockwise  to  increase 
torque  and  turn  counterclock-
wise to decrease torque.  
6. Prior to  using  on  an  application, 
it...

9 
 
LED INDICATION 
Status of the Tool Action to be Taken 
LED lights RED, YELLOW and 
GREEN together for one second.  
A long beep for one second. 
The motor is 
switched on. None required 
LED lights RED for one second.  
A long beep for one second. 
The preset torque 
is not reached 
(NOK). 
The application 
should be reworked. 
The screw has 
been refastened 
after already tight-
Double Hit (NOK). 
The application 
should be reworked. 
LED lights GREEN. 
The preset torque 
is reached and the...

10 
 
Li-ion Battery Pack  
NOTE:  Your  battery  pack  is  not 
fully  charged  at  the  time  of  pur-
chase.  Be  sure  to  charge  battery 
before first use. 
 
● Batteries  should  be  charged  in 
ambient temperatures between 0°
C  (32°F)  and  40°C  (104°F). 
Charging  outside  this  range  will 
result  in  either  less  than  full 
charge  or  damage  to  the  battery 
pack. 
● Allow  the  charger  to  cool  when 
charging  more  than  two  battery 
packs consecutively. 
● Do  not  insert...