Home > AGI Security > System > AGI Security System SYSHC1652S7 How to set up DVR for remote access End User User Manual

AGI Security System SYSHC1652S7 How to set up DVR for remote access End User User Manual

Add to Favourites
    Download as PDF

    View the AGI Security System SYSHC1652S7 How to set up DVR for remote access End User User Manual for free. All the AGI Security manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 How to set up DVR for remote access (End User) 1. Connect your DVR to the router using a network cable. 2. Get the DVR onto your local network- this is done by: User 3. Simply type in cmd into your PC 4. A prompt box will come up 5. Type in ipconfig and press enter 6. Note the Gateway address (3rd line), this is the address of your router (shown on the diagram above) 7. The Gateway needs to be put into the DVR network settings- you may need to change the ip address also. For example...
    Page 2 13. How to Setup a CCTV DVR for remote viewing online by PC Mac & smart phone internet Access 8517022012, See YouTube video below. https://www.youtube.com/watch?v=tg8wEzJOf9o&feature=player_embedded
    Start reading AGI Security System SYSHC1652S7 How to set up DVR for remote access End User User Manual

    Related Manuals for AGI Security System SYSHC1652S7 How to set up DVR for remote access End User User Manual

    All AGI Security manuals