AGI Security System SYSHC0851S9 Quick DDNS Quick Start Guide

							  1 / 11 
 
 
 
DDNS 快速指导手册   
 
 
 
 
 
 
 
 
 
 
 
Quick DDNS   
Quick Start Guide 
 
 
 
 
 
 
 
  
						

							  2 / 11 
 
 
   
 
Before Use 
  The device must be connected to the Internet, please check if the connection works 
properly. 
  Please confirm Internet access port is open and default port to open is: 80, 554, 
37777. To modify default port, please refer to DDNS User’s Manual.   
  Please enable UPnP and PPPOE function of the device. For UPnP and PPPOE 
setup, please refer to DDNS User’s Manual.   
  The default username and password are admin/admin. You should change your 
password at first login.   
  The default IP address is: 192.168.1.108. 
  DDNS management website: 
www.quickddns.com. 
  The device supports monitoring and DDNS management via mobile phone. You need 
to download the App first.   
  Please keep the tag of device MAC address. Do not lose or destroy it.   
  Quick DDNS service is disabled by default, and to enable it, you need to login first.     
 
 
 
   
						

							  3 / 11 
 
 
 
Table of Contents 
Before Use ........................................................................................................................ 2 
Enable Domain Name Access .......................................................................................... 4 
Default Domain Name Access .......................................................................................... 4 
Custom Domain Name ...................................................................................................... 5 
DDNS Web Registration and Management .......................................................................  7 
Mobile Phone Client .......................................................................................................... 9 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							  4 / 11 
 
 
 
Enable Domain Name Access 
  After the device boots up, please wait 1 to 3 min until the network indicator becomes 
normally green. Input device IP address (default IP address: 192.168.1.108) in Internet 
Explorer of PC. After login, go to Setup  Network Setup DDNS. You can modify 
DDNS setup in corresponding fields.   
  Please see Figure 1. 
 
Figure 1 Enable Domain Name Access 
 
 
  For server type please select Quick DDNS and enable DDNS by checking the box in 
front of Quick DDNS. Click on OK to save. 
 
Default Domain Name Access 
  The default domain name of device is: MAC address.quickddns.com 
  For example, current device MAC address is: 90:02:A9:01:08:84. You can input 
domain name as 9002A9010884.quickddns.com in Internet Explorer to access the device. 
If the device is connected under LAN router, then you need to log on the router to view all 
mappings and access the device via domain name plus port no.   
 
 
Note: 
MAC address of each device is labeled at its rear. When you input domain name in 
Internet Explorer, you should remove the “:” symbol therein.     
  
						

							  5 / 11 
 
 
   
 
Custom Domain Name 
  After the device boots up, input device IP address in Internet Explorer of PC. After 
login, go to Setup  Network Setup DDNS. You can modify DDNS setup in 
corresponding fields.   
  Please see Figure 2 Custom Domain Name. 
 
Figure 2 Custom Domain Name 
 
Server Type: Quick DDNS 
Server: www.quickddns.com (It cannot be changed.) 
Mode: Auto, manual (default is auto as access via device MAC address. For custom 
domain name, you need to switch to manual mode first.) 
Domain Name: The default domain name is device MAC address. You can customize it 
here.  
Click on Test to verify if your new domain name already exists. If it exists, please use 
another domain name instead until you have successfully changed domain name. 
If it does not exist, you may continue with your new domain name. If the device is 
connected under LAN router, then you need to log on the router to view all mappings and 
access the device via domain name plus port no.   
Username: You can centralize management over multiple devices by filling in valid 
username (email address) here. And you need to visit www.quickddns.com and register 
with that username. If you have registered already, then fill in the registered username in 
this field. 
Storage product has one additional function to IPC and speed dome camera which is 
this GUI menu. You can set custom domain name here.    
						

							  6 / 11 
 
 
 Please see Figure 3 Local GUI. 
 
Figure 3 Local GUI 
 
Note:  
  Domain name format: any combination of 0-9, A-Z, a-z, no special symbols. Max 60 
characters.  
  Please fill in the correct username, avoiding device ownership problem.   
   
						

							  7 / 11 
 
 
 
DDNS Web Registration and Management 
 DDNS web address：www.quickddns.com 
Please see Figure 4 DDNS Login 
 
Figure 4 DDNS Login 
 
DDNS Registration 
Click on Not Registered link, enter the registration page. Follow system instructions to 
complete registration.   
  Please see Figure 5 DDNS Registration. 
 
  
						

							  8 / 11 
 
 
 
Figure 5 DDNS Registration 
 
 Fields with * are required. Once you done, the system will send an activation mail to 
your username (valid email address). You must activate the registered username by 
following instructions in the mail before using. 
  Please see Figure 6 DDNS Registration Activation. 
 
 
 
 
 
 
Figure 6 DDNS Registration Activation 
 
  After you have activated your username, you can log in DDNS website to manage 
and view devices under your account.   
 
Equipment 
  When you login DDNS website, go to Equipment where you can view and manage 
devices under your account. Click on device domain name link to open corresponding 
Web interface.   
  Please see Figure 7 DDNS Management. 
 
  
						

							  9 / 11 
 
 
  
Figure 7 DDNS Management 
Mobile Phone Client   
  You can install corresponding DDNS client on your mobile phone. After installation 
completes, run the client. Go to Device Management Add  select DDNS add. Input 
your username (registered online) and password into the client. After you have 
successfully logged in, you will obtain all devices under your account.   
  Please see Figure 8 Mobile Phone Client. 
 
 
Figure 8 Mobile Phone Client 
 
Note:  
						

							  10 / 11 
 
 
 
 You would need to input username and password at first login.   
  Please see Figure 9. 
 
Figure 9 
 
  After you have logged in successfully, you may select device to monitor.   
  Please see Figure 10 Mobile Phone Monitoring.