AGI Security System SYSHC0457 P2P Operation Manual

 i 
 
 
 
P2P Operation Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
V1.0.0 
 
 
 
  

 ii 
Welcome 
Thank you for using our P2P function! 
This operation manual is designed to be a reference tool for your system.  
Please keep it well for future reference. 
 
Before your operation please read the following instructions carefully.  
 
 Before the operation, please make sure the device is online. The device shall be in a LAN or W AN 
that can access to the internet.  
 The internet access port is enabled. The default port includes 80, 554, and 37777. Please refer to 
the user’s manual if...

 iii 
Table of Contents  
1 About P2P .............................................................................................................................. 1 
1.1 Overview ................................................................................................................... 1 
1.2 Features .................................................................................................................... 1 
2 P2P Settings...

                                                                            
 1 
1 About P2P  
1.1 Overview  
P2P function allows you to scan the QR code and then access the device. It is free of dynamic domain 
application, port mapping, or proxy. You can easily watch the child, share the happy moment with your 
friends, or take care of the pet or store. All activities are unfolded before your eyes.  
1.2 Features 
 Quick installation. Scan QR and sign in. Just three steps.  
 Cell phone applications....

                                                                            
 2 
2 P2P Settings  
2.1 WEB 
Please follow the steps listed below.  
a) Login the W EB, from Setup->Network->TCP/IP->P2P; you can go to the following interface. 
See Figure 2-1. 
 
Figure 2-1 
b) Check the box here to enable P2P function. 
c) Click Save button.  
 
2.2 Local Settings 
Note 
This chapter is for NVR and DVR series product. Slight different may be found in the interface. The 
following operation is based on the...

                                                                            
 3 
b) Check the box to enable P2P function. 
c) Click Save button.  
  

                                                                            
 4 
3 Cell Phone Client 
3.1 Download  
Before the operation, please download the corresponding client to your cell phone.  
There are two OS: Android/IOS. Please check you cell phone OS and download the corresponding 
client. 
3.1.1 Android 
For Android cell phone, you can go to our official website to download or scan the following QR code. 
See Figure 3-1. 
 
Figure 3-1 
3.1.2 Iphone 
For iphone cell phone, you can go to the...

                                                                            
 5 
    
Figure 3-3 
c) In Figure 3-3, select , you can add/modify/delete device and control the 
device alarm output.  
d) Click  to add device. See Figure 3-4. 
 
Figure 3-4  

                                                                            
 6 
e) Click register mode and then select P2P. Click scan QR code button to scan the QR code 
from the device (such as network camera) or from GUI (such as DVR, NVR). See Figure 3-5. 
 
Figure 3-5 
f) After scan, you can view the product SN. Click the Start live preview button, now you can see 
the following interface. See Figure 3-6. 
 
Figure 3-6 
Important 
Device QR code is on the device. For network camera, it is at the...

                                                                            
 7 
 
 
Figure 3-7