AGI Security Central Management System CAAMD512 preparation User Manual

							CMS Installation Prerequisite 
PC Requirement 
Channel numbers 32CH or below 64CH or below 
CPU Intel core i3 or higher Intel core i5 or higher 
Memory 8GB or above 16GB or above 
Graphics Intel HD4000 or above AMD HD7700 or above 
Network Interface Gigabyte Ethernet 
Operation System Microsoft Windows 7 Professional 64 bit 
Brower Microsoft Internet Explorer 9 or above 
 
 
Notes: 
1. Please be sure to apply all service packs and OS patches. 
2. Multi streaming live display will consume PCs CPU and Memory performance. If 
your live view performance is not satisfactory, please reduce the number of 
channels which you viewed at the same time. 
3. For multiple monitor display, please choose adequate graphic cards and disable 
on board graphic card in case any conflicts occur.  
						

							Prerequisite Adjustment 
1. Windows login with administrator user level 
Some CMS functions will not be working if the program runs under other user 
level. 
2. Disable Windows Firewall 
Some CMS program or process will be blocked by Windows firewall, so normally 
we will recommend you to disable firewall. 
3. Check Windows Update(no more updates) 
Make sure .net framework and other windows program have been updated to 
the latest. 
4. Change the power setting like the below picture 
 Some settings will cause CMS function or display shut down irregularly. 
 
5. Change the user account control settings to never notify. 
Some CMS program or process will be blocked by limited user account control.  
  
						

							 
6. Change the internet settings of temporary internet files like the below picture. 
CMS main control panel will be effected by the following web page setting 
  
 
 
 
7. Delete browsing history on exit 
CMS main control panel will be effected by the following web page setting 
 
   
						

							8. Check if port 80 is occupied by other programs. 
If port 80 is occupied by other programs, then IIS will not be working, and CMS 
will not be working either. In which case, the programs have to be removed.  
The following steps shows how to check if port 80 is in use. 
 
Step1. Go to “Run”( Windows+R), and open cmd 
 
 
 
Step2. Enter “netstat –ao” 
 
 
   
						

							Step3. If there is any connection using port 80, please go to task manager to 
check (with the PID number) which program is using port 80 
  
 
 
Step4. Go to “Uninstall or change a program” to remove the program  
 
After checking PC requirements, and all the items above have 
been done, then it is ready to install CMS. 
Note: CMS installation must run under Windows Administrator 
user level.