AGFA APDV1019 User Manual

 
 51 
4.4.3 Slide show 
The camera includes a slide show function, which di splays each 
image in turn with a regular interval between pictu res. 
1.   Turn the video camera on and ensure it is in  Photo mode. 
Press the  Playback button and then press the  MENU 
button or tap the screen to display the  Photo Playback 
menu. 
2.   Use the  Up/Down  buttons to select the  Autoplay option 
and press the  ENTER button or tap the screen to confirm. 
The images will be displayed automatically.   
    
3....

 
 52
4.5 System menu 
The system menu is used to configure miscellaneous  camera 
functions. 
4.5.1  Setting the beep 
See section 2.6.3 “Setting the Beep”. 
4.5.2  Date/time 
See section 2.6.1 “Setting the date and time” 
4.5.3  Auto power off 
Use this function to switch the camera off automati cally after a 
period of inactivity for power saving. 
1.  Turn on the video camera and press the  Mode button to 
go to  SET mode. 
2.   Use the  Up/Down  buttons or tap the screen to highlight 
the  Auto...

 
 53 
4.5.4 TV standard 
Use the TV option to set the TV system for the area . 
1.   Turn on the video camera and press the  Mode button to 
go to  SET mode. 
2.   Use the  Up/Down  buttons to highlight the  TV standard 
option. Press the  ENTER button or tap the screen to 
display the submenu. 
3.   Use the  Up/Down  buttons or tap the screen to select 
NTSC  or PAL , and press the  ENTER button or tap  Ok to 
confirm.   
       

 
 54
4.5.5 Format 
Use this function to format the current storage med ia. This format 
action will delete everything on the media. 
1.  Turn on the video camera and press the  Mode button to 
go to  SET mode. 
2.   Use the  Up/Down  buttons to highlight the  Format option. 
Press the  ENTER button or tap the screen to display the 
submenu. 
3.   Use the  Up/Down  buttons to select  Cancel, or SD, and 
press the  ENTER button or tap  Ok to confirm. 
    
4.   The current media (memory card or internal...

 
 55 
4.5.6 Default 
Use this option to reset all settings to the defaul t settings. 
1.   Turn on the video camera and press the  Mode button to 
go to  SET mode. 
2.   Use the  Up/Down  buttons to highlight the  Default 
option. Press the  ENTER button or tap the screen to 
display the submenu. 
3.   Use the  Up/Down  buttons or tap the screen to select 
Cancel  or Ok, and press the  ENTER button or tap  Ok to 
confirm. 
    
4.5.7  Language 
See section 2.6.2 “Setting the language”.    

 
 56
4.5.8 Frequency 
Use the Frequency option to set the frequency syste m for your area. 
To set the frequency:  
1.   Turn on the video camera and switch to  SET mode. 
2.   Use the  Up/Down  buttons or tap the screen to highlight 
the  Frequency  option. Press the  ENTER button or tap the 
screen to display the submenu. 
3.   Use the  Up/Down  buttons or tap the screen to select 
NTSC  or PAL . Press the  ENTER button or tap  Ok to 
confirm. 
    
      

 
 57 
Appendix 
Specifications 
General 
Imaging  
sensor 1/3.2” CMOS 5.0 Megapixel sensor 
Active pixels 
5.0 Megapixel 
Storage media Built-in 128 MB flash memory (approx. 75  
MB available for image storage)  
SD Card, SDHC compatible (up to SDHC 
16GB Class 6) 
Sensor  
sensitivity Auto 
Color effects  Color/B&W/Sepia 
Lens  Fixed lens 
Wide: F/3.2, f=5.1mm 
Focus range  Normal: 1.5m~infinity Macro: 20-21cm 
Still image  Formats: JPEG (EXIF 2.2), DCF Resolution: 3M, 5M, 12M (Firmware  
interpolation)  

 
 58
General 
Movie clips  Format: H.264 (AVI) Resolution: QVGA (120 fps), WVGA (60  
fps), HD 720p (30 fps), HD 1080p (30 fps) 
Zoom  Movie: Digital Zoom 4X (except 1080p and QVGA)  
Camera: Digital Zoom 4X 
TFT Monitor  3” TFT LCD Touch Display (960 x 240 pixels) (16:9) 
LED Light  < 1.0 m range 
White balance Auto/Sunny/Cloudy/Tungsten/  
Fluorescent
 
EV  
compensation
 
-2.0 EV~+2.0 EV 
Self-timer  Off, 5, 10 seconds 
PC interface  MSDC: USB 2.0 (high speed) 
TV out format NTSC/PAL / HDMI 
Shutter...

 
 59 
General 
Dimension  17 (W) x 107 (H) x 57 (D) mm 
Weight  Approx. 97± 5g (without batteries) 
  

 
 60
Troubleshooting 
Problem Possible Cause Solution 
Cannot turn on  
the video 
camera. The batteries are 
not inserted 
correctly.  
The batteries  
have no power.  
  Insert the 
batteries 
correctly. (See  
2.2 Inserting the  
batteries.) 
   Replace the  
batteries 
The camera  
suddenly turns 
off.  The auto power off 
function was 
enabled.  
The camera is  
running out of  
battery power.  
  Turn the power 
on again. 
   Replace the 
batteries. 
The captured  
image is not  
stored in...