AGFA AP OPTIMA 3 User Manual

							
58
AgfaPhoto OPTIMA 3

Menu Wallpaper
Use Up/Down button to select the Menu Wallpaper 
option, press  button to confirm or press Left 
button to return to last page, and press  to exit the menu. 
• User
•  AgfaPhoto
•  Sparkling
Startup Screen 
Use Up/Down button to select the Startup Screen 
option, press  to confirm or press Left button to 
return to last page, and press  to exit the menu.
• User
•  AgfaPhoto  
						

							
59
AgfaPhoto OPTIMA 3

Back To Default
Use Up/Down button to select Back To Default, 
press  to confirm or press Left button to return 
to last page, and  press  to exit the menu.
• Yes
•  No 
						

							
6061
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
Setup Menu
Mode  M        
The Setup menu for the camera is available in all modes. Each menu page can be selected by pressing the  button and switching between menus with the Left/Right button.
To adjust the settings:
1. Select the menu page with the function you 
want to adjust and press the Down button. 2. 
Switch between different functions with the 
Up/Down button.
3.  Press the 
Right button to enter the submenu.
After selecting a function option, you can press the Up button to return to the menu for other Camera Setup pages. Or you can press the Down button to switch to the next menu page.
Refer to the following pages for more details about each setting. 
						

							
6061
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
61
AgfaPhoto OPTIMA 3
Beep
Use this setting to adjust the volume of beep when buttons are pressed and change the tones for Shutter button, self-timer, and power-on/power-off.
To change this setting:
1. Select the 
Beep setting from the Setup menu as described previously.
2.  Use the 
Up/Down navigation buttons to switch between volume, shutter tone, key tone, self-timer tone, and power tone fields.
3. Press the Right button, press the Up/Down button to adjust volume and change tone, and 
press the  button to confirm setting.
LCD Brightness
Use this setting to adjust the brightness of your LCD screen.
1. Select the 
LCD Brightness setting from the Setup menu as described previously.
2.  Select auto or adjust the brightness level using 
the Left/Right button, and press the  button to confirm the setting. 
						

							
62
AgfaPhoto OPTIMA 3
6263
Power Saver
This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn off the LCD screen and camera automatically after a period of inactivity.
1. Select the 
Power Save setting from the Setup menu as described previously.
2.  Press the Up/Down button to select the power 
items for the screen and camera and press the Right button.
3. Press the Up/Down button to adjust the selected item. Both items have the following options:
• Turn off the LCD: 30 sec, 1 min, 2 min, and off.
•  Turn off the camera:
 3 min, 5 min, 10 min, and off.
4. Press the  button to confirm.
Zone
The Zone setting is a useful function on your overseas trips. This feature enables you to display the local time on the LCD screen while you are overseas.
1. Select the 
Zone setting from the Setup menu as described previously. The world time screen appears.
2.  Use the 
Up/Down navigation buttons to switch between the hometown (  ) and travel destination (  ) fields.
3.  Use the 
Left/Right navigation buttons to select a city close to the desired time zone. Then press 
the  button to confirm. 
						

							
6263
AgfaPhoto OPTIMA 3
Date/Time
See “Setting the Date and Time“ section on page 15.
Language
See “Setting the Language“ section on page 16.
Format Memory
Please note:  formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files.
To use this setting:
1. Select the Format in File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No. Then press the  button to confirm.
3. The current media is formatted.
File and Software 
						

							
64
AgfaPhoto OPTIMA 3

File Numbering
After you take a picture or video clip, the camera will save it as file that ends with a serial number. You can use this item to choose whether the file is consecutively numbered or begins with 1 and is saved in another folder on the memory card.
1. Select the File Name in File and Software menu.
2. Select the option with the Up/Down button and press the  button for confirmation.
Copy to Card (Copy internal memory to 
memory card)
Use this setting to copy the files stored in the internal memory to the memory card.
1. Select the Copy to memory card in File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No. Then press the  button to confirm. 
						

							
65
AgfaPhoto OPTIMA 3

FW Version (Firmware Version)
Use this setting to view the current camera firmware version.
1. Select the 
FW Version in File and Software menu.
2.  If SD card contains a new version of firmware, 
please upgrade accordingly as necessary. 
To inform to the latest firmware version, you can go to the following website www.plawa.com
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select the Reset setting in File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No. Then press the  button to confirm. 
						

							
66676667
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
The video output signal can be switched to NTSC or PAL to accommodate different regional standards. The appropriate setting will vary between regions.
NTSC:  USA, Canada, Taiwan, Japan, etc.
PAL: 
Europe, Asia (excluding Taiwan), Oceania, etc.
Note:  The TV output will not display properly if an incorrect video system is selected.
Use this setting to determine your video system in the current area.
1 .  Select the Video System in Connection Transmission menu.
2.  Use the Up/Down navigation buttons to select NTSC or PAL. Then press the  button to confirm. 
Video System
Transmission 
						

							
66676667
AgfaPhoto OPTIMA 3AgfaPhoto OPTIMA 3
Connecting to a PC
Use the USB cable supplied with your camera to copy (transfer) pictures to a computer.
Setting the USB Mode
Since the camera’s USB port can be set to connect with either a PC or a Printer, the following steps will allow you to ensure that the camera is correctly configured to connect with a PC. The USB mode is set to PC by default.
1. Go to the transmission menu, select USB 
connection with the Up/Down button, and press the Right button.
2.  Use the 
Up/Down navigation buttons to select PC.
3.  Press the 
 button to confirm the setting.
Transferring Files to Your PC
The computer will automatically detect the camera as a removable drive. Double-click My Computer icon on the desktop to locate the removable drive and to copy the folders and files in the drive to a directory on your PC as you would copy any other folder or file.
By using the USB cable, you can transfer the captured photos and videos to a PC. Follow the steps below to connect the camera to a PC.
1. Make sure both the camera and PC are turned on. 
2.  Connect one end of the supplied USB cable to 
the USB/AV OUT port on your camera.
3.  Connect the other end of the cable to an 
available USB port on your PC.