Home > AGFA > Digital Camera > AGFA AP OPTIMA 1 User Manual

AGFA AP OPTIMA 1 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual AGFA AP OPTIMA 1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 35 AGFA manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    55
    Playing Movies
    1. Set the camera to Playback mode. 
    2. Use the navigation controls to scroll through the saved 
    images. A movie clip has a movie icon displayed on 
    screen. See pictur e on the right. 
    3. Press the  SET button to play the movie.
    4. During playback, press the   or   keys to fast  forward or rewind the movie. The camera supports 
    forward and rewind speed of up to 4x.
    5. During playback, use the   to control volume. Push 
    up toward  T is to increase volume. Push down 
    toward  W is to decrease volume.
    6. Press the   key to pause playback. Press the   key  again to resume. When paused, the play info will 
    remain on screen. 
    7. To forward or rewind the movie frame by frame, press 
    the   key to pause playback, then press the   or   
    keys.
    8. Press the   key to stop the playback. The LC D monitor displays the movie frame image in 
    Single navigation mode.
    •   The play info is displayed when the mo vie is paused or during REW/FF or frame by 
    frame modes.
    •   Volume cannot be adjusted when  paused or during REW/FF modes.27/2727/2 727/27
    2009/01/01  01:572009/0 1/0 1  0 1:5 72009/01/01  01:57
    SET S ET :
    WT0:00:16 / 0:00:200:0 0:1 6 /  0 :0 0:2 0
    Note 
    						
    							
    56
    To capture screenshot image from a movie clip
    1. During playback of movie, press the   key to pause playback on your desired movie frame to capture. 
    2. Press the  Shutter button to capture screenshot.
    3. The camera will automatica lly stop playback. The LCD 
    monitor displays the captured image in Single 
    navigation mode.
    The warning message will show in the following 3 situations by pressing  Shutter button: 
    Card locked, Folder cannot be created and memory full. The   icon does not appear 
    on the screen either.
    Playing Voice Recording
    1. Set the camera to Playback mode.
    2. Use the navigation controls  to scroll through the saved 
    images. When viewing a voice recording file, the LCD 
    monitor displays the screen layout of Audio clips. See 
    picture on the right. 
    3. Press the  SET button to play the voice recording.
    4. During playback, use the   to control volume. Push  up toward  T is to increase volume. Push down 
    toward  W is to decrease volume.
    5. Press the   key to pause playback. Press the   key  again to resume. When paused, the pl ay info will remain on screen. 
    6. Press the   key to stop the playback. The LC D monitor displays the audio file in Single 
    navigation mode.
    0:00:16 / 0:00:200 :0 0:1 6 /  0 :0 0:2 0
    Capture photoC aptu re  p hoto
    Note
    WT0:00:16 / 0:00:200 :0 0:1 6 /  0 :0 0:2 0 
    						
    							
    57
    Volume cannot be adjusted during pause or REW/FF modes.
    Playing Voice Memo
    Voice memo is separately recorded and attached to a 
    captured image. See “Voice Memo” on page 66 on how to 
    record voice memo.
    1. Set the camera to Playback mode.
    2. Use the navigation controls  to scroll through the saved 
    images. An image file with voice memo has a voice 
    memo icon located on th e top center of the LCD 
    monitor. See picture on the right.
    3. Press the  SET button to play the voice recording.
    4. During playback, use the   to control volume. Push  up toward  T is to increase volume. Push down toward  W is to decrease volume.
    5. Press the   key to pause playback. Press the   key again to resume. When paused, the  play info will remain on screen. 
    6. Press the   key to stop the playback. The  LCD monitor displays the image in Single 
    navigation mode.
    Volume cannot be adjusted when you pause the voice memo.
    Deleting an Image/Video/Audio
    There are two ways to delete an image/video/audio:•Using the  Delete button.
    • Using Playback Menu Delete settings. See “Delete” on page 60.
    Note
    1/ 301 / 3 01/ 30
    F 3.0F
     3 .0F 3.0
    0EV0 E V0EV
    SET S ET :12M12M
    ISO400400
    27/2727/2 727/27
    2009/01/01  01:572009/0 1/0 1  0 1:5 72009/01/01  01:57
    Note 
    						
    							
    58
    Using the Delete Button
    Use the Delete button on your camera to delete or mark an image/video/audio clip for 
    deletion. 
    1. Set the camera to Playback mode.
    2. View images/videos/audio cl ips in Single navigation 
    mode.
    3. Use the   or   keys to scroll the display. 
    4. When the desired image/video/audio clip is displayed  on the LCD monitor, press the  Delete button.
    5. A confirmation selection appears on screen. 
    6. Select  Delete.
    7. Press the  SET button to delete. 
    8. The next image is displayed on the LCD monitor. To delete another file, use the   or   keys to scroll through the images/video s/audio clips. Then, repeat steps 4 to 7.
    9. To close the Delete function and go back to viewing in single navigation mode, select  Cancel.
    Locked files cannot be deleted at any time. When you try to delete a locked file, 
    the camera displays “File Locked” message on the LCD monitor. Fn
    Delete
    Cancel
    Note 
    						
    							
    59
    Playback Menu
    The Playback menu allows you to edit images, records 
    voice memo, and setup playback settings.
    To go to Playback Menu: 
    1. Set the camera to Playback mode.
    2. Press   to launch the Playback Menu.
    3. Use the   or   keys to move through the menu 
    selections.
    4. To select a menu, press   or the  SET button. 
    5. Change the submenu settings using the 4-way navigation control.
    6. Press the  SET button to save and apply settings.
    Slideshow
    Only still images can be  played back in Slide show
    To view slideshow:
    1. From the Playback menu, select  Slideshow. 
    The Slideshow menu appears.
    2. Set the slideshow settings.
    3. Select  Start, then press the  SET button to start the 
    slideshow. 
    4. During slideshow, press the  SET button to pause 
    slideshow. 
    5. While stop playing, use   or   keys to move  through the options. Select whether to  Continue or 
    Exit  the slideshow. 
    6. Press the  SET button to apply selected option.
    Slide Show
    Delete
    Protect
    Red-eye Correction
    Voice Memo
    Photo Edit
    M
    Select Slide Show
    OK
    Interval
    Transition
    Repeat Start
    Cancel 1 sec.
    Horizontal Ye s 
    						
    							
    60
    To change slideshow settings:
    1. From the Slideshow menu, use the   or   keys to move through the selections.
    2. Select Interval setting. Press the   or   keys to adjust. Choose among the available interval settings: 1 sec., 3 sec., 5 sec., and 10 sec.
    3. Select Transition setting. Press the   or   keys to adjust. Choose among the available 
    transition settings: 
    4. Select Repeat setting. Press the   or   keys  to adjust. Available settings are: Yes, No.
    Delete
    The Delete function lets you remove unwanted files in the internal memory or on the memory 
    card. Protected files cannot be erased, to delete , unprotect the file first. See “Protect” on 
    page 63.
    To delete a photo/ video/audio clip:
    1. From the Playback menu, select  Delete.
    2. The Delete submenu is disp layed on the LCD monitor. 
    Select available settings: 
    •Single.  Select one file to delete.
    • Voice Only.  Delete only the attached voice 
    memo, the image is retained in the memory.
    • Multi . Select multiple files to delete at the 
    same time.
    • All.  Delete all files.
    •Horizontal •Shrink •Fade •Vertical •Random
    Slide Show
    Delete
    Protect
    Red-eye Correction
    Voice Memo
    Photo Edit
    Single
    Voice Only
    Multi
    All 
    						
    							
    61
    To delete a single file:
    1. Select Single in the Delete submenu, the images are 
    displayed on the LCD monitor in single navigation 
    mode.
    2. Use the   or   keys to scroll the display.
    3. When the desired image/video/audio clip is displayed  on the LCD monitor, select  Delete.
    4. Press the  SET button to delete. 
    5. The next image is displayed on the LCD monitor.  To delete another file, use the   or   keys to scroll 
    through the images/videos/audio clips. Repeat steps 3 to 4.
    6. To close the Delete function and go back Playback menu, select  Cancel.
    To delete attached voice memo:
    1. Set the camera to Playback mode.
    2. View images/videos/audio clip s in Single navigation mode.
    3. Use the   or   keys to scroll until the desired image with voice memo is displayed on  the screen.
    4. Press   to launch the Playback Menu.
    5. Use the   or   keys to move through the Playback menu selections then select  Delete.
    6. From the Delete submenu, select  Voice only.
    7. A confirmation selection appears, please select  Yes.
    8. Press the  SET button to delete the at tached voice memo and go back to Playback mode.
    Voice Memo menu is only available when voice memo file exists on the camera.
    Delete
    Cancel
    M
    Note 
    						
    							
    62
    To delete multiple files:
    1. Select Multi in the Delete submenu, the images are  displayed in thumbnail view on the LCD 
    monitor.
    2. Use the navigation control to move through the files.
    3. When the image/video/audi o clip to be deleted is 
    moved, press the  SET button to mark image/video/
    audio clip for deletion.
    4. Repeat step 3 until all desired images for deletion are  marked.
    5. Press the  MENU button. A confirmation selection 
    appears.
    6. Select  Yes to confirm.
    7. Press the  SET button to delete marked files.
    To delete all files:
    1. Select  All in the Delete submenu. A confirmation 
    message appears.
    2. Select  Yes.
    3. Press the  SET button to delete all files.
    Sele ctSelectN extNext
    Ye s
    Cancel
    Delete selected files ?
    Delete all files ?
    Ye s
    Cancel 
    						
    							
    63
    Protect
    The Protect function lets you lock a photo, video or audio file to protect it from being modified or 
    accidentally erased. A protected file has a  lock icon when viewed on Playback mode. 
    To protect files:
    1. From the Playback menu, select  Protect.
    2. The Protect submenu is displayed on the LCD monitor.  Select available settings: 
    •Single.  Select one file to lock. 
    • Multi . Select multiple files from the thumbnail 
    view to lock.
    • Lock All.  Lock all files
    • Unlock All.  Unlock all files.
    To protect/unprotect a single file:
    1. Select Single in the Protect submenu, the images are 
    displayed on the LCD monitor in single navigation 
    mode.
    2. Use the   or   keys to scroll the display.
    3. When the desired file is displayed on the LCD monitor,  select  Lock/Unlock . 
    4. Press the  SET button to select  Exit or press  Menu 
    key to leave.
    To protect/unprotect multiple files:
    1. Select Multi in the Protect submenu, the images are  displayed in thumbnail vi ew on the LCD monitor.
    2. Use the navigation control to move through the files.
    3. When moved to the file to be protected, press the  SET  button to mark/unmark the file clip for 
    protection. 
    Slide Show
    Delete
    Protect
    Red-eye Correction
    Voice Memo
    Photo Edit
    Single
    Multi
    Lock all
    Unlock all
    Lock
    Exit
    S ele ctSelectN extNext 
    						
    							
    64
    4. Repeat step 3 until all desired files to protect are 
    marked.
    5. Press the  MENU button. A confirmation selection 
    appears.
    6. Select  Yes.
    7. Press the  SET button to lock files and go back to 
    Playback mode.
    To protect all files:
    1. Select  Lock all in the Protect submenu. 
    A confirmation message appears.
    2. Select  Yes.
    3. Press the  SET button to protect all files.
    To unlock all files:
    1. Select  Unlock all  in the Protect submenu. 
    A confirmation message appears.
    2. Select  Yes.
    3. Press the  SET button to unlock  all protected files.
    Ye s
    Cancel
    Change protect settings ?
    Ye s
    Cancel
    Lock all files ?
    Unlock all files ?
    Ye s
    Cancel 
    						
    All AGFA manuals Comments (0)

    Related Manuals for AGFA AP OPTIMA 1 User Manual